From 65ea7b0361810491630c3a709b4a291c7d44e430 Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Sat, 21 Jan 2023 23:11:24 +0100 Subject: Update realtek luna SDK command page and migrate LEOX ONT to luna SDK command page, add command for CarlitoxxPro (#134) * migrate some command to luna sdk and add new command to afm0003 * fix * update * final fix on rtk * fix * fix * fix * restore nokia for move to other pr * last fix on tc Co-authored-by: Simone Bortolin --- _ont/ont-luna-sdk-useful-commands.md | 195 +++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 _ont/ont-luna-sdk-useful-commands.md (limited to '_ont/ont-luna-sdk-useful-commands.md') diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md new file mode 100644 index 0000000..535d62a --- /dev/null +++ b/_ont/ont-luna-sdk-useful-commands.md @@ -0,0 +1,195 @@ +# General Settings and Useful Commands + +## Useful files +- `/var/config/lastgood.xml` - Contains the user portion of the configuration +{% if include.lastgoodHs %} +- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) +{% endif %} +- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) + +## Useful binaries +- `{{ include.flash }}` - Used to manipulate the config files in a somewhat safe manner +- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `{{ include.flash }}` +- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` +- `omcicli` - Used to interact with the running OMCI daemon +- `omci_app` - The OMCI daemon +- `diag` - Used to run low-level diagnostics commands on the stick + + +## Getting/Setting the ONT's S/N +```sh +# {{ include.flash }} get GPON_SN +GPON_SN=TMBB00000000 +# {{ include.flash }} set GPON_SN TMBB0A1B2C3D +``` + +## Getting/Setting the ONT's PLOAM password +{% if include.ploam == 'asciiAndHex' %} + +{% include alert.html content="The ploam can be saved in either ASCII or HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141 +``` + +{% elsif include.ploam == 'hex' %} + +{% include alert.html content="The PLOAM password is stored in HEX format, without any 0x or separators" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=41414141414141414141 +# {{ include.flash }} set GPON_PLOAM_PASSWD 41414141414141414141 +``` +{% elsif include.ploam == 'ascii' %} + +{% include alert.html content="The PLOAM password is stored in ASCII format" alert="Info" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_PLOAM_PASSWD +GPON_PLOAM_PASSWD=AAAAAAAAAA +# {{ include.flash }} set GPON_PLOAM_PASSWD AAAAAAAAAA +``` +{% endif %} + +## Checking the currently active image +```sh +# nv getenv sw_active +sw_active=1 +# nv getenv sw_version0 +sw_version0=V1_7_8_210412 +# nv getenv sw_version1 +sw_version1=V1_7_8_210412 +``` + +## Booting to a different image +```sh +# nv setenv sw_commit 0|1 +# reboot +``` + +## Getting/Setting the ONT Vendor ID + +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# flash get PON_VENDOR_ID +PON_VENDOR_ID=ZTEG +# flash set PON_VENDOR_ID HWTC +``` + +## Getting/Settng the ONT Custom software version +{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the OMCI_OLT_MODE value to be set to 3" %} +{% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %} + +```sh +# nv setenv sw_custom_version0 YOURFIRSTSWVER +# nv setenv sw_custom_version1 YOURSECONDSWVER +``` + +## Getting/Setting a custom HW Version +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get HW_HWVER +HW_HWVER=V2.0 +# {{ include.flash }} set HW_HWVER MYHWVERSION +``` + +## Getting/Setting a custom ONT Equipment ID +{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %} + +```sh +# {{ include.flash }} get GPON_ONU_MODEL +GPON_ONU_MODEL=DFP-34X-2C2 +# {{ include.flash }} set GPON_ONU_MODEL DFP-34X-XXX +``` + +## Getting/Setting OMCI OLT Mode and Fake OMCI + +Configure how ONT Stick handle OMCI from OLT: + +```sh +# {{ include.flash }} get OMCI_OLT_MODE +OMCI_OLT_MODE=1 +# {{ include.flash }} set OMCI_OLT_MODE 2 +``` + +| Value | Note | OMCI Information | +| ----- | --------------- | ---------------------------------------------- | +| 0 | Default Mode | Stock, some value are cannot be change | +| 1 | Huawei OLT Mode | Huawei MA5671a | +| 2 | ZTE OLT Mode | ZTE | +| 3 | Customized Mode | Custom Software/Hardware Version, OMCC, etc... | + +Some Fiber Vendor/Wholesale/ISP have explicit LAN Port Number provisioning or proprietary OMCI that ONT Stick cant not understand, this will make ONT Stick reply OK whatever OMCI OLT throw at. + +`0` = Disable, `1` = Enable, Default is 0 + +```sh +# {{ include.flash }} get OMCI_FAKE_OK +OMCI_FAKE_OK=0 +# {{ include.flash }} set OMCI_FAKE_OK 1 +``` +{% if include.speedLan %} + +## Getting/Setting Speed LAN Mode +{% assign customSpeedLanAlert = include.customSpeedLanAlert | default: "Before editing the speed make sure your hardware supports it." %} +{% include alert.html content=customSpeedLanAlert alert="Note" icon="svg-info" color="blue" %} + +To change the link mode use this command: + +```sh +# {{ include.flash }} get LAN_SDS_MODE +LAN_SDS_MODE=0 +# {{ include.flash }} set LAN_SDS_MODE 1 +``` + +| Value | `cat /proc/kmsg` | Mode | Behavior | +| ----- | ------------------------------------ | -------- | --------------------------- |{% if include.speedLan contains '0' %} +| 0 | `<4>change mode to 0(GE/FE PHY)` | `TP` | 1GbaseT/100baseT |{% endif %}{% if include.speedLan contains '1' %} +| 1 | `<4>change mode to 1(Fiber 1G)` | `FIBER` | 1GbaseX with auto-neg on |{% endif %}{% if include.speedLan contains '2' %} +| 2 | `<4>change mode to 2(SGMII PHY)` | `TP MII` | 1Gb PHY |{% endif %}{% if include.speedLan contains '3' %} +| 3 | `<4>change mode to 3(SGMII MAC)` | `MII` | 1Gb MAC |{% endif %}{% if include.speedLan contains '4' %} +| 4 | `<4>change mode to 4(HiSGMII PHY)` | `TP MII` | 2.5Gb PHY |{% endif %}{% if include.speedLan contains '5' %} +| 5 | `<4>change mode to 5(HiSGMII MAC)` | `MII` | 2.5Gb MAC |{% endif %}{% if include.speedLan contains '6' %} +| 6 | `<4>change mode to 6(2500BaseX)` | `FIBER` | 2500baseX with auto-neg on |{% endif %}{% if include.speedLan contains '7' %} +| 7 | `<4>change mode to 7(SGMII Force)` | `TP` | 1GbaseT with auto-neg off |{% endif %}{% if include.speedLan contains '8' %} +| 8 | `<4>change mode to 8(HISGMII Force)` | `TP` | 2500baseT with auto-neg off |{% endif %} + +{% endif %} + +## Change IP address + +```sh +# {{ flash }} get LAN_IP_ADDR +LAN_IP_ADDR=192.168.2.1 +# {{ flash }} set LAN_IP_ADDR 192.168.1.1 +``` + +## Checking whether the connection with the OLT was successful (O5 state) + +```sh +diag gpon get onu-state +``` + +## Querying a particular OMCI ME +```sh +# omcicli mib get MIB_IDX +``` + +## Getting/Setting the L2 Bridge MTU +{% include alert.html content="Settings given via diag are not permanent after reboot" alert="Note" icon="svg-info" color="blue" %} + +Getting/Setting the MTU of the L2 bridge +```sh +# diag switch get max-pkt-len port all +Port Speed +---------- +0 1538 +2 2031 +# diag switch set max-pkt-len port all length 2000 +``` \ No newline at end of file -- cgit v1.2.3