From 72c13df9f2ba5d503c14e264a0d7d0c6fd494f50 Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Sat, 9 Sep 2023 11:01:19 +0200 Subject: update OMCI_OLT_MODE and LAN_SDS_MODE for realtek (#272) Co-authored-by: Simone Bortolin --- _ont/ont-carlitoxxpro-cpgos03-0490-v2.md | 5 ++++- _ont/ont-leox-lxt-010g-d.md | 7 ++++++- _ont/ont-leox-lxt-010h-d.md | 7 ++++++- _ont/ont-leox-lxt-010s-h.md | 8 +++++++- _ont/ont-luna-sdk-useful-commands.md | 24 ++++++++++++++++++++---- _ont/ont-odi-realtek-dfp-34g-2c2.md | 8 +++++++- _ont/ont-odi-realtek-dfp-34x-2c2.md | 8 +++++++- _ont/ont-t-w-twcgpon657.md | 7 ++++++- _ont/ont-technicolor-afm0002.md | 14 +++++++++----- _ont/ont-technicolor-afm0003.md | 9 ++++++++- _ont/ont-vsol-v2801f.md | 7 ++++++- 11 files changed, 86 insertions(+), 18 deletions(-) (limited to '_ont') diff --git a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md index 2f10493..ed5d0bf 100644 --- a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md +++ b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md @@ -30,7 +30,10 @@ parent: CarlitoxxPro - You should use the VID/VLAN shown by executing the command `omcicli mib get 84` via telnet to bring up PPPoE -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='asciiAndHex' %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='flash' + ploam='asciiAndHex' +%} # Miscellaneous Links diff --git a/_ont/ont-leox-lxt-010g-d.md b/_ont/ont-leox-lxt-010g-d.md index 02da189..ef8b272 100644 --- a/_ont/ont-leox-lxt-010g-d.md +++ b/_ont/ont-leox-lxt-010g-d.md @@ -30,4 +30,9 @@ parent: LEOX The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. -{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' %} +{% include_relative ont-luna-sdk-useful-commands.md + ploam='ascii' + flash='/etc/scripts/flash' + customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.' + omciOLT21='true' +%} diff --git a/_ont/ont-leox-lxt-010h-d.md b/_ont/ont-leox-lxt-010h-d.md index f88b9fb..2d9ffda 100644 --- a/_ont/ont-leox-lxt-010h-d.md +++ b/_ont/ont-leox-lxt-010h-d.md @@ -70,6 +70,11 @@ This ONT supports dual boot. {% include alert.html content="Before proceed on any modification, make a backup of files rtl8290b.data and europa.data from /var/config folder. These files include optical calibration of your ONT's laser, if you accidentally delete or ruin them, your ONT will be unusable" alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %} +{% include_relative ont-luna-sdk-useful-commands.md + ploam='ascii' + flash='/etc/scripts/flash' + customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.' + omciOLT21='true' +%} diff --git a/_ont/ont-leox-lxt-010s-h.md b/_ont/ont-leox-lxt-010s-h.md index 533939d..fffbf10 100644 --- a/_ont/ont-leox-lxt-010s-h.md +++ b/_ont/ont-leox-lxt-010s-h.md @@ -68,7 +68,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a - V3.3.4L4rc1 (Fix 2.5GbE HiSGMII) - V3.3.4L4rc5 -{% include_relative ont-luna-sdk-useful-commands.md ploam='ascii' speedLan='178' customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' flash='/etc/scripts/flash' customSwVersionAlert='This needs the OMCI_OLT_MODE value to be set to 21' omciOLT21='true' %} +{% include_relative ont-luna-sdk-useful-commands.md + ploam='ascii' + speedLan='18' + customSpeedLanAlert='You need firmware `V3.3.4L4rc1` or higher. Before editing the speed make sure your hardware supports it. If you try to use any mode not listed here, stick will default to mode 1.' + flash='/etc/scripts/flash' + customSwVersionAlert='This needs the `OMCI_OLT_MODE` value to be set to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`.' + omciOLT21='true' %} # Known Bugs diff --git a/_ont/ont-luna-sdk-useful-commands.md b/_ont/ont-luna-sdk-useful-commands.md index 40fac95..e48cda5 100644 --- a/_ont/ont-luna-sdk-useful-commands.md +++ b/_ont/ont-luna-sdk-useful-commands.md @@ -100,9 +100,13 @@ GPON_PLOAM_PASSWD=AAAAAAAAAA ## Getting/Setting OMCI software version (ME 7) -{% assign customSwVersionAlert = include.customSwVersionAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %} +{% if include.customSwVersionAlert %} + +{% assign customSwVersionAlert = include.customSwVersionAlert %} {% include alert.html content=customSwVersionAlert alert="Note" icon="svg-info" color="blue" %} +{% endif %} + {% if include.flashSwVersion %} ```sh # {{ include.flash }} get OMCI_SW_VER1 @@ -121,9 +125,13 @@ OMCI_SW_VER1=YOURSECONDSWVER ## Getting/Setting OMCI hardware version (ME 256) -{% assign customHwVersionAlert = include.customHwVersionAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %} +{% if include.customHwVersionAlert %} + +{% assign customHwVersionAlert = include.customHwVersionAlert %} {% include alert.html content=customHwVersionAlert alert="Note" icon="svg-info" color="blue" %} +{% endif %} + ```sh # {{ include.flash }} get HW_HWVER HW_HWVER=V2.0 @@ -132,9 +140,13 @@ HW_HWVER=V2.0 ## Getting/Setting OMCI vendor ID (ME 256) -{% assign customVendorAlert = include.customVendorAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %} +{% if include.customVendorAlert %} + +{% assign customVendorAlert = include.customVendorAlert %} {% include alert.html content=customVendorAlert alert="Note" icon="svg-info" color="blue" %} +{% endif %} + ```sh # {{ include.flash }} get PON_VENDOR_ID PON_VENDOR_ID=ZTEG @@ -143,9 +155,13 @@ PON_VENDOR_ID=ZTEG ## Getting/Setting OMCI equipment ID (ME 257) -{% assign customEquipAlert = include.customEquipAlert | default: "This needs the `OMCI_OLT_MODE` value to be set to 3" %} +{% if include.customEquipAlert %} + +{% assign customEquipAlert = include.customEquipAlert %} {% include alert.html content=customEquipAlert alert="Note" icon="svg-info" color="blue" %} +{% endif %} + ```sh # {{ include.flash }} get GPON_ONU_MODEL GPON_ONU_MODEL=DFP-34X-2C2 diff --git a/_ont/ont-odi-realtek-dfp-34g-2c2.md b/_ont/ont-odi-realtek-dfp-34g-2c2.md index 9b43409..efbe6b6 100644 --- a/_ont/ont-odi-realtek-dfp-34g-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34g-2c2.md @@ -70,7 +70,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`" speedLan='1234567' omciOLT21='true' %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='flash' + ploam='hex' + customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`." + speedLan='1234567' + omciOLT21='true' +%} # Known Bugs diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md index 5bafd9e..579d734 100644 --- a/_ont/ont-odi-realtek-dfp-34x-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md @@ -79,7 +79,13 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='hex' customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`" speedLan='1234567' omciOLT21='true' %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='flash' + ploam='hex' + customSwVersionAlert="This needs the `OMCI_OLT_MODE` value to be set to 3 and firmware 220530 or 220923 modded by @stich86 or if you don't want to replace firmware to change software version, set `OMCI_OLT_MODE` value to `21`. This will force to use your own settings from the XML file, but this is a hack and causes sigsegv of `/bin/checkomci`." + speedLan='1234567' + omciOLT21='true' +%} # Known Bugs diff --git a/_ont/ont-t-w-twcgpon657.md b/_ont/ont-t-w-twcgpon657.md index a92287d..b1dc00f 100644 --- a/_ont/ont-t-w-twcgpon657.md +++ b/_ont/ont-t-w-twcgpon657.md @@ -36,7 +36,12 @@ parent: T&W The reccomended version are `C00R657V2801F_V1.9.0-220404.tar` because it is the V2801F firmware for T&W TWC GPON657. -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. Before editing the speed make sure your hardware supports it.' %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='flash' + ploam='ascii' + speedLan='123456' + customSpeedLanAlert='Please use recommended version `C00R657V2801F_V1.9.0-220404.tar`. With other firmware it is not guaranteed that `LAN_SDS_MODE` other than `1` will work. Before editing the speed make sure your hardware supports it.' +%} # Known Bugs diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md index 245dfb8..adc2482 100644 --- a/_ont/ont-technicolor-afm0002.md +++ b/_ont/ont-technicolor-afm0002.md @@ -82,11 +82,15 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one -{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' lastgoodHs=true flashSwVersion=true -customSwVersionAlert="This needs the `/etc/scripts/flash` modded" -customHwVersionAlert="This needs the `/etc/scripts/flash` modded" -customVendorAlert="This needs the `/etc/scripts/flash` modded" -customEquipAlert="This needs the `/etc/scripts/flash` modded" +{% include_relative ont-luna-sdk-useful-commands.md + flash='/etc/scripts/flash' + ploam='ascii' + lastgoodHs=true + flashSwVersion=true + customSwVersionAlert="This needs the `/etc/scripts/flash` modded" + customHwVersionAlert="This needs the `/etc/scripts/flash` modded" + customVendorAlert="This needs the `/etc/scripts/flash` modded" + customEquipAlert="This needs the `/etc/scripts/flash` modded" %} ## Enabling the Web UI diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md index 2098bf8..7a44ab2 100644 --- a/_ont/ont-technicolor-afm0003.md +++ b/_ont/ont-technicolor-afm0003.md @@ -70,7 +70,14 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one -{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' lastgoodHs=true flashSwVersion=true %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='/etc/scripts/flash' + ploam='ascii' + speedLan='123456' + customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' + lastgoodHs=true + flashSwVersion=true +%} ## Enabling the Web UI ```sh diff --git a/_ont/ont-vsol-v2801f.md b/_ont/ont-vsol-v2801f.md index fdc2b60..c87de37 100644 --- a/_ont/ont-vsol-v2801f.md +++ b/_ont/ont-vsol-v2801f.md @@ -35,7 +35,12 @@ parent: VSOL The reccomended version are `V2801F_V1.9.0-220425.tar` because it has Modern WebGUI, 2.5GbE, patched `runlansds.sh`, `tftpd`, ... -{% include_relative ont-luna-sdk-useful-commands.md flash='flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='Please use recommended version `V2801F_V1.9.0-220425.tar`. Before editing the speed make sure your hardware supports it.' %} +{% include_relative ont-luna-sdk-useful-commands.md + flash='flash' + ploam='ascii' + speedLan='123456' + customSpeedLanAlert='Please use recommended version `V2801F_V1.9.0-220425.tar`. With other firmware it is not guaranteed that `LAN_SDS_MODE` other than `1` will work. Before editing the speed make sure your hardware supports it.' +%} # Known Bugs -- cgit v1.2.3