From 816f0e9d4dd0312be86b9be14f75595ffbd93d33 Mon Sep 17 00:00:00 2001
From: krakenrf <78108016+krakenrf@users.noreply.github.com>
Date: Fri, 30 Aug 2024 00:02:03 +1200
Subject: Updated 05. KrakenSDR Web Interface Controls (markdown)

---
 05.-KrakenSDR-Web-Interface-Controls.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to '05.-KrakenSDR-Web-Interface-Controls.md')

diff --git a/05.-KrakenSDR-Web-Interface-Controls.md b/05.-KrakenSDR-Web-Interface-Controls.md
index e7aeb24..a2146bf 100644
--- a/05.-KrakenSDR-Web-Interface-Controls.md
+++ b/05.-KrakenSDR-Web-Interface-Controls.md
@@ -323,7 +323,7 @@ This provides an option to calibrate the full system by compensating for phase d
 
 `explicit-time-delay` - If you've measure time delay with a VNA you can input the time differences in nanoseconds here. Please note the differences must be measured relative to channel 0. 
 
-`touchtone` - You can output .s1p files from your VNA for the 5 coax cables in your system, and copy them to the _calibration folder. Name them as cable_ch0.s1p, cable_ch1.s1p and so on for each of your five cables used in the system. You need to ensure that the touchstone file covers the frequency range that you will be using.
+`touchtone` - You can output S21 or S12 .s1p files from your VNA for the 5 coax cables in your system, and copy them to the _calibration folder. Name them as cable_ch0.s1p, cable_ch1.s1p and so on for each of your five cables used in the system. You need to ensure that the touchstone file covers the frequency range that you will be using.
 
 **IQ Adjust Amplitude**
 
-- 
cgit v1.2.3