// Copyright 2015 Citra Emulator Project
// Licensed under GPLv2 or any later version
// Refer to the license.txt file included.
#include <memory>
#include <unordered_map>
#include <boost/range/algorithm/fill.hpp>
#include "common/hash.h"
#include "common/make_unique.h"
#include "common/microprofile.h"
#include "common/profiler.h"
#include "video_core/debug_utils/debug_utils.h"
#include "video_core/pica.h"
#include "video_core/pica_state.h"
#include "video_core/video_core.h"
#include "shader.h"
#include "shader_interpreter.h"
#ifdef ARCHITECTURE_x86_64
#include "shader_jit_x64.h"
#endif // ARCHITECTURE_x86_64
namespace Pica {
namespace Shader {
#ifdef ARCHITECTURE_x86_64
static std::unordered_map<u64, CompiledShader*> shader_map;
static JitCompiler jit;
static CompiledShader* jit_shader;
static void ClearCache() {
shader_map.clear();
jit.Clear();
LOG_INFO(HW_GPU, "Shader JIT cache cleared");
}
#endif // ARCHITECTURE_x86_64
void Setup(UnitState<false>& state) {
#ifdef ARCHITECTURE_x86_64
if (VideoCore::g_shader_jit_enabled) {
u64 cache_key = (Common::ComputeHash64(&g_state.vs.program_code, sizeof(g_state.vs.program_code)) ^
Common::ComputeHash64(&g_state.vs.swizzle_data, sizeof(g_state.vs.swizzle_data)) ^
g_state.regs.vs.main_offset);
auto iter = shader_map.find(cache_key);
if (iter != shader_map.end()) {
jit_shader = iter->second;
} else {
// Check if remaining JIT code space is enough for at least one more (massive) shader
if (jit.GetSpaceLeft() < jit_shader_size) {
// If not, clear the cache of all previously compiled shaders
ClearCache();
}
jit_shader = jit.Compile();
shader_map.emplace(cache_key, jit_shader);
}
}
#endif // ARCHITECTURE_x86_64
}
void Shutdown() {
#ifdef ARCHITECTURE_x86_64
ClearCache();
#endif // ARCHITECTURE_x86_64
}
static Common::Profiling::TimingCategory shader_category("Vertex Shader");
MICROPROFILE_DEFINE(GPU_VertexShader, "GPU", "Vertex Shader", MP_RGB(50, 50, 240));
OutputVertex Run(UnitState<false>& state, const InputVertex& input, int num_attributes) {
auto& config = g_state.regs.vs;
Common::Profiling::ScopeTimer timer(shader_category);
MICROPROFILE_SCOPE(GPU_VertexShader);
state.program_counter = config.main_offset;
state.debug.max_offset = 0;
state.debug.max_opdesc_id = 0;
// Setup input register table
const auto& attribute_register_map = config.input_register_map;
// TODO: Instead of this cumbersome logic, just load the input data directly like
// for (int attr = 0; attr < num_attributes; ++attr) { input_attr[0] = state.registers.input[attribute_register_map.attribute0_register]; }
if (num_attributes > 0) state.registers.input[attribute_register_map.attribute0_register] = input.attr[0];
if (num_attributes > 1) state.registers.input[attribute_register_map.attribute1_register] = input.attr[1];
if (num_attributes > 2) state.registers.input[attribute_register_map.attribute2_register] = input.attr[2];
if (num_attributes > 3) state.registers.input[attribute_register_map.attribute3_register] = input.attr[3];
if (num_attributes > 4) state.registers.input[attribute_register_map.attribute4_register] = input.attr[4];
if (num_attributes > 5) state.registers.input[attribute_register_map.attribute5_register] = input.attr[5];
if (num_attributes > 6) state.registers.input[attribute_register_map.attribute6_register] = input.attr[6];
if (num_attributes > 7) state.registers.input[attribute_register_map.attribute7_register] = input.attr[7];
if (num_attributes > 8) state.registers.input[attribute_register_map.attribute8_register] = input.attr[8];
if (num_attributes > 9) state.registers.input[attribute_register_map.attribute9_register] = input.attr[9];
if (num_attributes > 10) state.registers.input[attribute_register_map.attribute10_register] = input.attr[10];
if (num_attributes > 11) state.registers.input[attribute_register_map.attribute11_register] = input.attr[11];
if (num_attributes > 12) state.registers.input[attribute_register_map.attribute12_register] = input.attr[12];
if (num_attributes > 13) state.registers.input[attribute_register_map.attribute13_register] = input.attr[13];
if (num_attributes > 14) state.registers.input[attribute_register_map.attribute14_register] = input.attr[14];
if (num_attributes > 15) state.registers.input[attribute_register_map.attribute15_register] = input.attr[15];
state.conditional_code[0] = false;
state.conditional_code[1] = false;
#ifdef ARCHITECTURE_x86_64
if (VideoCore::g_shader_jit_enabled)
jit_shader(&state.registers);
else
RunInterpreter(state);
#else
RunInterpreter(state);
#endif // ARCHITECTURE_x86_64
// Setup output data
OutputVertex ret;
// TODO(neobrain): Under some circumstances, up to 16 attributes may be output. We need to
// figure out what those circumstances are and enable the remaining outputs then.
unsigned index = 0;
for (unsigned i = 0; i < 7; ++i) {
if (index >= g_state.regs.vs_output_total)
break;
if ((g_state.regs.vs.output_mask & (1 << i)) == 0)
continue;
const auto& output_register_map = g_state.regs.vs_output_attributes[index]; // TODO: Don't hardcode VS here
u32 semantics[4] = {
output_register_map.map_x, output_register_map.map_y,
output_register_map.map_z, output_register_map.map_w
};
for (unsigned comp = 0; comp < 4; ++comp) {
float24* out = ((float24*)&ret) + semantics[comp];
if (semantics[comp] != Regs::VSOutputAttributes::INVALID) {
*out = state.registers.output[i][comp];
} else {
// Zero output so that attributes which aren't output won't have denormals in them,
// which would slow us down later.
memset(out, 0, sizeof(*out));
}
}
index++;
}
// The hardware takes the absolute and saturates vertex colors like this, *before* doing interpolation
for (unsigned i = 0; i < 4; ++i) {
ret.color[i] = float24::FromFloat32(
std::fmin(std::fabs(ret.color[i].ToFloat32()), 1.0f));
}
LOG_TRACE(HW_GPU, "Output vertex: pos(%.2f, %.2f, %.2f, %.2f), quat(%.2f, %.2f, %.2f, %.2f), "
"col(%.2f, %.2f, %.2f, %.2f), tc0(%.2f, %.2f), view(%.2f, %.2f, %.2f)",
ret.pos.x.ToFloat32(), ret.pos.y.ToFloat32(), ret.pos.z.ToFloat32(), ret.pos.w.ToFloat32(),
ret.quat.x.ToFloat32(), ret.quat.y.ToFloat32(), ret.quat.z.ToFloat32(), ret.quat.w.ToFloat32(),
ret.color.x.ToFloat32(), ret.color.y.ToFloat32(), ret.color.z.ToFloat32(), ret.color.w.ToFloat32(),
ret.tc0.u().ToFloat32(), ret.tc0.v().ToFloat32(),
ret.view.x.ToFloat32(), ret.view.y.ToFloat32(), ret.view.z.ToFloat32());
return ret;
}
DebugData<true> ProduceDebugInfo(const InputVertex& input, int num_attributes, const Regs::ShaderConfig& config, const ShaderSetup& setup) {
UnitState<true> state;
state.program_counter = config.main_offset;
state.debug.max_offset = 0;
state.debug.max_opdesc_id = 0;
// Setup input register table
const auto& attribute_register_map = config.input_register_map;
float24 dummy_register;
boost::fill(state.registers.input, &dummy_register);
if (num_attributes > 0) state.registers.input[attribute_register_map.attribute0_register] = &input.attr[0].x;
if (num_attributes > 1) state.registers.input[attribute_register_map.attribute1_register] = &input.attr[1].x;
if (num_attributes > 2) state.registers.input[attribute_register_map.attribute2_register] = &input.attr[2].x;
if (num_attributes > 3) state.registers.input[attribute_register_map.attribute3_register] = &input.attr[3].x;
if (num_attributes > 4) state.registers.input[attribute_register_map.attribute4_register] = &input.attr[4].x;
if (num_attributes > 5) state.registers.input[attribute_register_map.attribute5_register] = &input.attr[5].x;
if (num_attributes > 6) state.registers.input[attribute_register_map.attribute6_register] = &input.attr[6].x;
if (num_attributes > 7) state.registers.input[attribute_register_map.attribute7_register] = &input.attr[7].x;
if (num_attributes > 8) state.registers.input[attribute_register_map.attribute8_register] = &input.attr[8].x;
if (num_attributes > 9) state.registers.input[attribute_register_map.attribute9_register] = &input.attr[9].x;
if (num_attributes > 10) state.registers.input[attribute_register_map.attribute10_register] = &input.attr[10].x;
if (num_attributes > 11) state.registers.input[attribute_register_map.attribute11_register] = &input.attr[11].x;
if (num_attributes > 12) state.registers.input[attribute_register_map.attribute12_register] = &input.attr[12].x;
if (num_attributes > 13) state.registers.input[attribute_register_map.attribute13_register] = &input.attr[13].x;
if (num_attributes > 14) state.registers.input[attribute_register_map.attribute14_register] = &input.attr[14].x;
if (num_attributes > 15) state.registers.input[attribute_register_map.attribute15_register] = &input.attr[15].x;
state.conditional_code[0] = false;
state.conditional_code[1] = false;
RunInterpreter(state);
return state.debug;
}
} // namespace Shader
} // namespace Pica
