From e93c07ba677f694f9c49519bb97ddbe4e7e926ad Mon Sep 17 00:00:00 2001
From: "Wolfgang (Wolle) Ewald" <wolfgang.ewald@wolles-elektronikkiste.de>
Date: Wed, 23 Jun 2021 20:53:02 +0200
Subject: Add files via upload

---
 examples/Using_two_ADS1115/Using_two_ADS1115.ino | 72 +++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

(limited to 'examples')

diff --git a/examples/Using_two_ADS1115/Using_two_ADS1115.ino b/examples/Using_two_ADS1115/Using_two_ADS1115.ino
index 8b13789..a8c8666 100644
--- a/examples/Using_two_ADS1115/Using_two_ADS1115.ino
+++ b/examples/Using_two_ADS1115/Using_two_ADS1115.ino
@@ -1 +1,71 @@
-
+/***************************************************************************
+* Example sketch for the ADS1115_WE library
+*
+* This sketch shows how to use two ADS1115 modules. In order to set the address, 
+* connect the address pin to:
+* 
+* GND -> 0x48 (or leave unconnected)
+* VCC -> 0x49
+* SDA -> 0x4A
+* SCL -> 0x4B
+* 
+* When you have understood how it works you can easily add two additional ADS1115.
+* Of course there is potential to shorten the code, e.g. by setting up the ADCs 
+* as array.
+* 
+* If you need up to eight ADS1115 modules you can use an ESP32 with its two I2C 
+* interfaces:
+* https://wolles-elektronikkiste.de/en/how-to-use-the-i2c-interfaces-of-the-esp32 
+* 
+* If you need up to 32 ADS1115 modules you can use a multiplexer like the TSCA9548A:
+* https://wolles-elektronikkiste.de/en/tca9548a-i2c-multiplexer
+*  
+* Or you combine both and control up to 64 ADS1115 modules.
+*  
+* Further information about the ADS1115 can be found on:
+* https://wolles-elektronikkiste.de/ads1115 (German)
+* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English)
+* 
+***************************************************************************/
+
+#include<ADS1115_WE.h> 
+#include<Wire.h>
+#define I2C_ADDRESS_1  0x48
+#define I2C_ADDRESS_2  0x49
+
+ADS1115_WE adc_1 = ADS1115_WE(I2C_ADDRESS_1);
+ADS1115_WE adc_2 = ADS1115_WE(I2C_ADDRESS_2);
+
+void setup() {
+  Wire.begin();
+  Serial.begin(9600);
+  
+  if(!adc_1.init()){
+    Serial.print("ADS1115 No 1 not connected!");
+  }
+  adc_1.setVoltageRange_mV(ADS1115_RANGE_6144);
+  adc_1.setMeasureMode(ADS1115_CONTINUOUS); 
+  adc_1.setCompareChannels(ADS1115_COMP_0_GND);
+  
+  if(!adc_2.init()){
+    Serial.print("ADS1115 No 2 not connected!");
+  }
+  adc_2.setVoltageRange_mV(ADS1115_RANGE_6144);
+  adc_2.setMeasureMode(ADS1115_CONTINUOUS); 
+  adc_2.setCompareChannels(ADS1115_COMP_0_GND);
+}
+
+void loop() {
+  float voltage = 0.0;
+  
+  voltage = adc_1.getResult_V();
+  Serial.println("Voltage [V], ADS1115 No 1: ");
+  Serial.println(voltage);
+
+  voltage = adc_2.getResult_V();
+  Serial.println("Voltage [V], ADS1115 No 2: ");
+  Serial.println(voltage);
+ 
+  Serial.println("****************************");  
+  delay(1000);
+}
-- 
cgit v1.2.3