1 files changed, 85 insertions, 0 deletions

diff --git a/private/ntos/ndis/lt200/lthrd.h b/private/ntos/ndis/lt200/lthrd.h
new file mode 100644
index 000000000..dc5378f89
--- /dev/null
+++ b/private/ntos/ndis/lt200/lthrd.h
@@ -0,0 +1,85 @@
+/*++
+
+Copyright (c) 1992  Microsoft Corporation
+
+Module Name:
+
+	lthrd.h
+
+Abstract:
+
+	This module contains the hardware specific defines.
+
+Author:
+
+	Stephen Hou			(stephh@microsoft.com)
+	Nikhil 	Kamkolkar 	(nikhilk@microsoft.com)
+
+Revision History:
+	19 Jun 1992		Initial Version (dch@pacvax.pacersoft.com)
+
+Notes:	Tab stop: 4
+--*/
+
+#ifndef	_LTHRD_
+#define	_LTHRD_
+
+
+#define LT_DEFAULT_SLOT_NUMBER       	1
+#define LT_DEFAULT_BUS_NUMBER        	0
+#define LT_DEFAULT_RECEIVE_BUFFERS   	3
+#define LT_DEFAULT_IO_BASE_ADDRESS   	0x340
+#define LT_MAX_ADAPTERS             	8
+#define LT_NUMBER_OF_PORTS           	4
+#define LT_MAXIMUM_PACKET_SIZE       	603
+
+#define LT_MINIMUM_PACKET_SIZE			3
+#define LT_LENGTH_OF_ADDRESS       		1
+
+#define	LT_ADAPTER_POLLED_MODE			0xFF		// Adapter in polling mode
+
+// LT command/response codes.
+
+#define LT_CMD_LAP_INIT    	1        // initialize command.
+#define LT_RSP_LAP_INIT    	2        // Initialize response.
+#define LT_CMD_LAP_WRITE   	3        // Transmit a lap frame.
+#define LT_RSP_LAP_FRAME   	4        // Received lap frameresponse.
+#define LT_CMD_GET_STATUS  	5        // Get LAP hardware status command.
+#define LT_RSP_STATUS     	6        // LAP Hardware status response.
+
+typedef struct _LT_STATUS_RESPONSE {
+
+    UCHAR    NodeId;         // Adapters LocalTalk Address.
+    UCHAR    RomVer;         // Version of LT ROM.
+    UCHAR    SwVer;          // Version of downloaded Firmware
+
+} LT_STATUS_RESPONSE, *PLT_STATUS_RESPONSE;
+
+typedef struct _LT_INIT_RESPONSE {
+    UCHAR    NodeId;
+    UCHAR    RomVer;
+} LT_INIT_RESPONSE, *PLT_INIT_RESPONSE;
+
+// Definition for the LT Transfer Control Status Register.
+#define TX_READY           	1
+#define RX_READY       		2
+
+// I/O Port Address Mapping Definitions
+#define XFER_PORT   		Adapter->MappedIoBaseAddr+0	// (Adapter->LtPortAddress)
+#define SC_PORT     		Adapter->MappedIoBaseAddr+1	// (Adapter->LtPortAddress+1)
+#define RESET_PORT  		Adapter->MappedIoBaseAddr+3	// (Adapter->LtPortAddress+3)
+
+typedef struct _LT_CARD_IO {
+    USHORT  	IoLen;         	// Length of io_data
+    UCHAR    	IoCode;        	// Command response
+    UCHAR    	IoData[1];     	// Command response Data.
+} LtCardIo, *PLtCardIo;
+
+#ifdef	LTHRD_LOCALS
+
+#endif	// LTHRD_LOCALS
+
+
+#endif	// _LTHRD_
+
+