1 files changed, 524 insertions, 0 deletions
diff --git a/private/ntos/ndis/dc21x4/miigen.c b/private/ntos/ndis/dc21x4/miigen.c
new file mode 100644
index 000000000..d1d7d4333
--- /dev/null
+++ b/private/ntos/ndis/dc21x4/miigen.c
@@ -0,0 +1,524 @@
+/*+
+ * file:        miigen.c
+ *
+ * Copyright (C) 1992-1995 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ * All rights reserved.
+ *
+ * This software is furnished under a license and may be used and copied
+ * only  in  accordance  of  the  terms  of  such  license  and with the
+ * inclusion of the above copyright notice. This software or  any  other
+ * copies thereof may not be provided or otherwise made available to any
+ * other person.  No title to and  ownership of the  software is  hereby
+ * transferred.
+ *
+ * The information in this software is  subject to change without notice
+ * and  should  not  be  construed  as a commitment by digital equipment
+ * corporation.
+ *
+ * Digital assumes no responsibility for the use  or  reliability of its
+ * software on equipment which is not supplied by digital.
+ *
+ *
+ * Abstract:    This file contains the code needed to support the 
+ *              generic PHY chip through MII connection
+ *
+ * Author:      Claudio Hazan
+ *
+ * Revision History:
+ *
+ *  20-Nov-95   as     Initial version
+ *  20-Dec-95   phk    Cleanup
+ *
+-*/
+
+
+#include <precomp.h>
+
+
+
+/*+
+ *
+ *MiiGenInit(Adapter)
+ *
+ *Description:
+ *    This Routine is called to initialize the module:
+ *    - Initializes its internal structures.
+ *    - Calls FindMiiPhysProc to find the first PHY on the adapter card
+ *    - If a PHY is found then
+ *         - Calls the PHY's init routine.
+ *         - Gets the PHY's capabilities and saves them 
+ *           as the generic PHY capabilities.
+ *
+ *On Entry:
+ *
+ *Returns:  FALSE - no PHY was found.
+ *          TRUE  - a PHY was found.
+ *
+-*/
+extern
+BOOLEAN
+MiiGenInit(
+    PDC21X4_ADAPTER Adapter
+    )
+{
+
+   CAPABILITY Cap;
+   UINT Loop;
+   UINT Retry=2;
+   UINT Count;
+   ULONG Status;
+
+#if MII_DBG
+   DbgPrint("MiiGenInit\n");
+#endif
+
+   //Find the first PHY connected
+
+   if (!FindAndInitMiiPhys(Adapter)) {
+#if MII_DBG
+       DbgPrint("***MiiGenInit: No PHY was found\n");
+#endif
+       return FALSE;
+   }
+   
+   // Set Generic PHY capabilities
+
+   (Adapter->MiiGen.Phys[Adapter->PhyNumber])->PhyExtRoutines.PhyGetCapabilities(
+                                                      Adapter->MiiGen.Phys[Adapter->PhyNumber],
+                                                      &Cap
+                                                      );
+   // Update General Phys' capabilities
+
+   Adapter->MiiGen.PhysCapabilities |= Cap;
+#if MII_DBG
+   DbgPrint("MiiGenInit: PHY Capabilities= %04x\n", Cap);
+#endif
+
+   // Selected PHY number 
+   Adapter->MiiGen.SelectedPhy = Adapter->PhyNumber;
+
+   return TRUE;
+}
+
+
+
+
+/*+
+ *
+ *  MiiGenGetCapabilities (Adapter)
+ *
+ *
+ * Description:
+ *
+ *     Returns the Generic Phy capabilities
+ *
+ * Returns:
+ *
+ *      Phys capabilities 
+ *
+-*/
+extern
+USHORT
+MiiGenGetCapabilities(
+   PDC21X4_ADAPTER Adapter
+   )
+{
+#if __DBG
+   DbgPrint("MiiGenGetCapabilities\n");
+#endif
+   return(Adapter->MiiGen.PhysCapabilities);
+}
+
+
+/*+
+ *
+ *MiiGenCheckConnection 
+ *
+ *Description:
+ *        Checks if the desired connection is supported by the PHY.
+ *
+ *On Entry:
+ *      Connection  - the desired connection.
+ *
+ *Returns
+ *      FALSE - upon failing to support connection.
+ *      TRUE  - on success.
+ *
+-*/
+
+extern
+BOOLEAN
+MiiGenCheckConnection( 
+   PDC21X4_ADAPTER Adapter,
+   USHORT Connection
+   )
+{
+   // Check PHY's connection
+#if MII_DBG
+   DbgPrint("MiiGenCheckConnection\n");
+#endif
+
+   return CheckConnectionSupport(
+                     Adapter->MiiGen.Phys[Adapter->PhyNumber],
+                     Connection
+                     );
+}
+
+
+/*+
+ *
+ *MiiGenSetConnection 
+ *
+ *Description:
+ *        Sets PHY's connection to the desired connection and advertised
+ *
+ *       (PHY will remain Isolated and selecting one of them will
+ *        be done via the Admin control procedure).
+ *
+ *On Entry:
+ *      Connection  - the desired connection.
+ * NWAYAdvertisement  (if =0 -> use PHY's defaults)
+ *
+ *Returns
+ *      FALES - upon failing to set connection.
+ *      TRUE  - on success.
+ *
+-*/
+
+extern
+BOOLEAN
+MiiGenSetConnection( 
+   PDC21X4_ADAPTER Adapter,
+   UINT Connection,
+   USHORT NwayAdvertisement
+   )
+{
+   // Set PHY's connection
+#if MII_DBG
+   DbgPrint("MiiGenSetConnection\n");
+#endif
+
+   return  (Adapter->MiiGen.Phys[Adapter->PhyNumber])->PhyExtRoutines.PhySetConnectionType(
+                     Adapter,
+                     Adapter->MiiGen.Phys[Adapter->PhyNumber],
+                     Connection,
+                     NwayAdvertisement
+                     );
+}
+
+/*+
+ *
+ *MiiGenGetConnectionStatus
+ *
+ *Description:
+ *    Returns the connection status of the Phy
+ *
+ *On Entry:
+ *
+ *On Return:
+ *        ConnectionStatus - hold connection status
+ *
+ *Return:  FALSE: Upon Status "error" (Nway configuring or Link-Fail)
+ *         TRUE:  No error
+ *
+-*/
+extern
+BOOLEAN
+MiiGenGetConnectionStatus (
+     PDC21X4_ADAPTER Adapter,
+     PUSHORT ConnectionStatus
+     )
+{
+#if MII_DBG
+   DbgPrint("MiiGenGetConnectionStatus\n");
+#endif
+   return Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyExtRoutines.PhyGetConnectionStatus(
+                     Adapter,
+                     Adapter->MiiGen.Phys[Adapter->PhyNumber],
+                     ConnectionStatus
+                     );
+}
+
+
+
+/*+
+ *
+ *MiiGenGetConnection 
+ *
+ *Description:
+ *    Returns the connection type of the PHY if possible (PHY Nway
+ *    is either disabled or completed).
+ *
+ *
+ *On Return:
+ *      Connection - Phys connection.
+ *
+ *Returns;  FALSE -   set Upon error  (Connection = MAC_CONN_UNKNOWN)
+ *          TRUE  -   valid connection type.
+ *
+-*/
+extern
+BOOLEAN
+MiiGenGetConnection(
+    PDC21X4_ADAPTER Adapter,
+    PUSHORT Connection
+    )
+{
+
+   // Is the PHY in a "stable" state ?
+
+#if MII_DBG
+   DbgPrint("MiiGenGetConnection\n");
+#endif
+   if (Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyExtRoutines.PhyGetConnectionStatus(
+             Adapter,
+             Adapter->MiiGen.Phys[Adapter->PhyNumber],
+             Connection
+             )
+      ) {
+
+       // PHY is in a stable state - get Connection
+
+       return Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyExtRoutines.PhyGetConnectionType(
+                    Adapter,
+                    Adapter->MiiGen.Phys[Adapter->PhyNumber],
+                    Connection
+                    );
+   }
+   else {
+
+       // NWAY Not in stable state or Link_Fail.
+       *Connection = MAC_CONN_UNKNOWN;
+#if MII_DBG
+       DbgPrint("***MiiGenGetConnection: Connection= %04x Unknown by the PHY or status not stable\n", *Connection);
+#endif
+       return FALSE;
+   }
+
+}
+
+
+
+
+
+
+/*+
+ *
+ *MiiGenAdminStatus 
+ *
+ *Description:
+ * Returnes the Admin status of the PHY.
+ *
+ *On Return:
+ *       AdminStatus
+ *
+ *Returns: 
+ *       None
+ *
+-*/
+extern
+void
+MiiGenAdminStatus(
+   PDC21X4_ADAPTER Adapter,
+   PUSHORT AdminStatus
+   )
+{
+
+   // Get PHY Status
+#if MII_DBG
+   DbgPrint("MiiGenAdminStatus\n");
+#endif
+
+   Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyExtRoutines.PhyAdminStatus(
+          Adapter,
+          Adapter->MiiGen.Phys[Adapter->PhyNumber],
+          AdminStatus
+          );
+
+}
+
+
+
+
+
+
+
+/*+
+ *
+ *MiiGenAdminControl
+ *
+ *Description:
+ *    Performs the requested Admin control on the Phy.
+ *
+ *On Entry:
+ *       AdminControl
+ *
+ *Returns:
+ *     FALSE -   upon Failure.
+ *     TRUE  -  Perform Admin control OK.
+ *
+-*/
+extern
+BOOLEAN
+MiiGenAdminControl(
+   PDC21X4_ADAPTER Adapter,
+   USHORT  AdminControl
+   )
+{
+   // Perform the operation on the Phy
+#if MII_DBG
+   DbgPrint("MiiGenAdminControl: %s\n", 
+                AdminControl == MiiGenAdminReset? "Reset" :
+                AdminControl == MiiGenAdminOperational? "Operational" :
+                AdminControl == MiiGenAdminForce10? "Force10" :
+                AdminControl == MiiGenAdminForce10Fd? "Force10Fd" :
+                AdminControl == MiiGenAdminRelease10? "Release10" :
+                AdminControl == MiiGenAdminStandBy? "StandBy" :
+                AdminControl == MiiGenAdminPowerDown? "PowerDown" :
+                "Unknown Command!!!!"
+              );
+#endif
+
+   Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyExtRoutines.PhyAdminControl(
+        Adapter,
+        Adapter->MiiGen.Phys[Adapter->PhyNumber],
+        AdminControl
+        );
+
+   // Perform Generic PHY operations related to the specified command
+
+   switch (AdminControl) {
+
+     case MiiGenAdminReset:
+     case MiiGenAdminOperational:
+     case MiiGenAdminForce10:
+     case MiiGenAdminForce10Fd:
+     case MiiGenAdminRelease10:
+
+       Adapter->MiiGen.SelectedPhy = Adapter->PhyNumber;
+       break;
+
+     case MiiGenAdminStandBy:
+     case MiiGenAdminPowerDown:
+
+       Adapter->MiiGen.SelectedPhy = NO_SELECTED_PHY;
+       break;
+     
+     
+     default:
+       // If reached this point Unknown command
+       return FALSE;
+   }
+   return TRUE;
+}
+
+
+
+
+
+
+
+/*+
+ *
+ *FindAndInitMiiPhysProc
+ *
+ *Description:
+ *    This Routine Scans the entire Nic's Phys address space and
+ *    for a PHY and Initializes each PHY found .
+ *
+ *On Return:
+ *
+ *    Note: The driver currently supports only 1 single PHY per
+ *           adapter
+ *
+ *Returns:
+ *
+ *    TRUE if a PHY was found and initialized successfully
+-*/
+BOOLEAN
+FindAndInitMiiPhys(
+   PDC21X4_ADAPTER Adapter
+   )
+{
+   INT  PhysCount = 0;            // Start from address 0
+   NDIS_STATUS NdisStatus;
+
+#if MII_DBG
+   DbgPrint("FindAndInitMiiPhys\n");
+#endif
+ 
+   if (!Adapter->MiiGen.Phys[Adapter->PhyNumber]) {
+
+       ALLOC_MEMORY(
+           &NdisStatus,
+           &(Adapter->MiiGen.Phys[Adapter->PhyNumber]),
+           sizeof(MII_PHY_INFO)
+           );
+   
+       if (NdisStatus != NDIS_STATUS_SUCCESS) {
+          return FALSE;
+       } 
+  
+   } 
+   
+   // Init the routine's structure.
+   InitPhyInfoEntries(
+           Adapter->MiiGen.Phys[Adapter->PhyNumber]
+           );
+
+   while (PhysCount < MAX_PHYADD) {
+
+      // did we pass the legal address range ?
+      // Is there a PHY in this address?
+
+      Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyAddress = PhysCount;
+#if MII_DBG
+      DbgPrint("Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyAddress=%02x\n",Adapter->MiiGen.Phys[Adapter->PhyNumber]->PhyAddress);
+#endif
+      if (MiiPhyInit(
+              Adapter, 
+              Adapter->MiiGen.Phys[Adapter->PhyNumber]
+              ) ) {
+        // Found a PHY - Handle it
+#if MII_DBG
+        DbgPrint("FindAndInitMiiPhys: A PHY was found at address= %d\n", PhysCount);
+#endif
+        Adapter->MiiGen.NumOfPhys++;        // inc # of phys found
+        return TRUE;
+      }
+      PhysCount++;       //   Look at next PHY address.
+   }
+   
+   FREE_MEMORY(
+      Adapter->MiiGen.Phys[Adapter->PhyNumber],
+      sizeof(MII_PHY_INFO)  
+      );
+   Adapter->MiiGen.Phys[Adapter->PhyNumber] = (PMII_PHY_INFO)NULL;
+
+   return FALSE;
+}
+
+
+/*+
+ *
+ * MiiFreeResources
+ *
+ *Description:
+ *    Free the resources allocated to Mii
+ *
+-*/
+void
+MiiFreeResources(
+   PDC21X4_ADAPTER Adapter
+   )
+
+{
+  if (Adapter->MiiGen.Phys[Adapter->PhyNumber]) {
+     FREE_MEMORY(
+         Adapter->MiiGen.Phys[Adapter->PhyNumber],
+         sizeof(MII_PHY_INFO)  
+         );
+     Adapter->MiiGen.Phys[Adapter->PhyNumber] = (PMII_PHY_INFO)NULL;
+  }
+}