diff options
Diffstat (limited to 'private/ntos/nthals/halsni4x/mips/unicache.s')
-rw-r--r-- | private/ntos/nthals/halsni4x/mips/unicache.s | 1098 |
1 files changed, 1098 insertions, 0 deletions
diff --git a/private/ntos/nthals/halsni4x/mips/unicache.s b/private/ntos/nthals/halsni4x/mips/unicache.s new file mode 100644 index 000000000..d91a0f13a --- /dev/null +++ b/private/ntos/nthals/halsni4x/mips/unicache.s @@ -0,0 +1,1098 @@ +//#pragma comment(exestr, "$Header: /usr4/winnt/SOURCES/halvlbms/src/hal/halsni4x/mips/RCS/unicache.s,v 1.1 1995/05/19 11:26:20 flo Exp $") +// TITLE("Cache Flush") +//++ +// +// Copyright (c) 1991-1993 Microsoft Corporation +// +// Module Name: +// +// unicache.s +// +// Abstract: +// +// This module implements the code necessary for cache operations on +// MIPS R4000 Uni Processor machine. +// +// Environment: +// +// Kernel mode only. +// +//-- + +#include "halmips.h" + +// +// Note: On the SNI machines all single processor machines are configured in the Firmware +// tree with the size of the Primary cache matching the physical size. +// So, even Orion CPU are configured with 16KB not 2 sets of 8Kb. +// In this case wqe can use the Routines special for Orion CPU also for +// R4400 CPU. +// + +#if!defined(ORION) +#define ORION +#endif + +// +// some bitmap defines to display cache activities via the LED's +// in the SNI RM machines +// + +#define SWEEP_DCACHE 0xc0 // 1100 0000 +#define FLUSH_DCACHE_PAGE 0x80 // 1000 0000 +#define PURGE_DCACHE_PAGE 0x40 // 0100 0000 + +#define SWEEP_ICACHE 0x30 // 0011 0000 +#define PURGE_ICACHE_PAGE 0x10 // 0001 0000 + +// +// Define cache operations constants. +// + +#define COLOR_BITS (7 << PAGE_SHIFT) // color bit (R4000 - 8kb cache) +#define COLOR_MASK (0x7fff) // color mask (R4000 - 8kb cache) +#define FLUSH_BASE 0xfffe0000 // flush base address +#define PROTECTION_BITS ((1 << ENTRYLO_V) | (1 << ENTRYLO_D) ) // + + SBTTL("Change Color Page") +//++ +// +// VOID +// HalChangeColorPage ( +// IN PVOID NewColor, +// IN PVOID OldColor, +// IN ULONG PageFrame +// ) +// +// Routine Description: +// +// This function changes the color of a page if the old and new colors +// do not match. +// +// The algorithm used to change colors for a page is as follows: +// +// 1. Purge (hit/invalidate) the page from the instruction cache +// using the old color. +// +// 2. Purge (hit/invalidate) the page from the data cache using +// the old color. +// +// Arguments: +// +// NewColor (a0) - Supplies the page aligned virtual address of the +// new color of the page to change. +// +// OldColor (a1) - Supplies the page aligned virtual address of the +// old color of the page to change. +// +// PageFrame (a2) - Supplies the page frame number of the page that +// is changed. +// +// Return Value: +// +// None. +// +//-- + + .struct 0 + .space 3 * 4 // fill +CpRa: .space 4 // saved return address +CpFrameLength: // length of stack frame +CpA0: .space 4 // (a0) +CpA1: .space 4 // (a1) +CpA2: .space 4 // (a2) +CpA3: .space 4 // (a3) + + NESTED_ENTRY(HalChangeColorPage, CpFrameLength, zero) + + subu sp,sp,CpFrameLength // allocate stack frame + sw ra,CpRa(sp) // save return address + + PROLOGUE_END + + and a0,a0,COLOR_BITS // isolate new color bits + and a1,a1,COLOR_BITS // isolate old color bits + beq a0,a1,10f // if eq, colors match + sw a1,CpA1(sp) // save old color bits + sw a2,CpA2(sp) // save page frame + +// +// Purge the instruction cache using the old page color. +// + + move a0,a1 // set color value + move a1,a2 // set page frame number + li a2,PAGE_SIZE // set length of purge + jal HalPurgeIcachePage // purge instruction cache page + +// +// Flush the data cache using the old page color. +// + + lw a0,CpA1(sp) // get old color bits + lw a1,CpA2(sp) // get page frame number + li a2,PAGE_SIZE // set length of purge + jal HalFlushDcachePage // purge data cache page +10: lw ra,CpRa(sp) // get return address + addu sp,sp,CpFrameLength // deallocate stack frame + j ra // return + + .end HalChangeColorPage + + SBTTL("Flush Data Cache Page") +//++ +// +// VOID +// HalpFlushDcachePageUni ( +// IN PVOID Color, +// IN ULONG PageFrame, +// IN ULONG Length +// ) +// +// Routine Description: +// +// This function flushes (hit/writeback/invalidate) up to a page of data +// from the data cache. +// +// Arguments: +// +// Color (a0) - Supplies the starting virtual address and color of the +// data that is flushed. +// +// PageFrame (a1) - Supplies the page frame number of the page that +// is flushed. +// +// Length (a2) - Supplies the length of the region in the page that is +// flushed. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalpFlushDcachePageUni) + +#if DBG + + lw t0,KeDcacheFlushCount // get address of dcache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + + la t0, HalpLedAddress // get the address for the LED register + lw t0, 0(t0) + lw t1, KiPcr + PcSetMember(zero) // get a bitmapped value for Processor Number + or t1, t1, FLUSH_DCACHE_PAGE // what are we doing ? + xor t1, t1, 0xff // inverse + sb t1, 0(t0) // display it +#endif + + .set noreorder + .set noat + lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache policy + and a0,a0,COLOR_MASK // isolate color and offset bits + li t0,FLUSH_BASE // get base flush address + or t0,t0,a0 // compute color virtual address + sll t1,a1,ENTRYLO_PFN // shift page frame into position + or t1,t1,PROTECTION_BITS // merge protection bits + or t1,t1,v0 // merge cache policy + and a0,a0,0x1000 // isolate TB entry index + beql zero,a0,10f // if eq, first entry + move t2,zero // set second page table entry + move t2,t1 // set second page table entry + move t1,zero // set first page table entry +10: mfc0 t3,wired // get TB entry index + lw v0,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size + lw t4,KiPcr + PcFirstLevelDcacheFillSize(zero) // get 1st fill size + bnel zero,v0,15f // if ne, second level cache present + move t4,v0 // set flush block size + .set at + .set reorder + +// +// Flush a page from the data cache. +// + +15: DISABLE_INTERRUPTS(t5) // disable interrupts + + .set noreorder + .set noat + mfc0 t6,entryhi // get current PID and VPN2 + srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address + sll t7,t7,ENTRYHI_VPN2 // + and t6,t6,0xff << ENTRYHI_PID // isolate current PID + or t7,t7,t6 // merge PID with VPN2 of virtual address + mtc0 t7,entryhi // set VPN2 and PID for probe + mtc0 t1,entrylo0 // set first PTE value + mtc0 t2,entrylo1 // set second PTE value + mtc0 t3,index // set TB index value + nop // fill + tlbwi // write TB entry - 3 cycle hazzard + subu t6,t4,1 // compute block size minus one + and t7,t0,t6 // compute offset in block + addu a2,a2,t6 // round up to next block + addu a2,a2,t7 // + nor t6,t6,zero // complement block size minus one + and a2,a2,t6 // truncate length to even number + beq zero,a2,30f // if eq, no blocks to flush + and t8,t0,t6 // compute starting virtual address + addu t9,t8,a2 // compute ending virtual address + bne zero,v0,40f // if ne, second level cache present + subu t9,t9,t4 // compute ending loop address + +// +// Flush the primary data cache only. +// + +20: cache HIT_WRITEBACK_INVALIDATE_D,0(t8) // invalidate cache block + bne t8,t9,20b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + +30: ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + +// +// Flush the primary and secondary data caches. +// + + .set noreorder + .set noat +40: cache HIT_WRITEBACK_INVALIDATE_SD,0(t8) // invalidate cache block + bne t8,t9,40b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + + ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + + .end HalpFlushDcachePageUni + + SBTTL("Purge Data Cache Page") +//++ +// +// VOID +// HalpPurgeDcachePageUni ( +// IN PVOID Color, +// IN ULONG PageFrame, +// IN ULONG Length +// ) +// +// Routine Description: +// +// This function purges (hit/invalidate) up to a page of data from the +// data cache. +// +// Arguments: +// +// Color (a0) - Supplies the starting virtual address and color of the +// data that is purged. +// +// PageFrame (a1) - Supplies the page frame number of the page that +// is purged. +// +// Length (a2) - Supplies the length of the region in the page that is +// purged. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalpPurgeDcachePageUni) + +#if DBG + + lw t0,KeDcacheFlushCount // get address of dcache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + + la t0, HalpLedAddress // get the address for the LED register + lw t0, 0(t0) + lw t1, KiPcr + PcSetMember(zero) // get a bitmapped value for Processor Number + or t1, t1, PURGE_DCACHE_PAGE // what are we doing ? + xor t1, t1, 0xff // inverse + sb t1, 0(t0) // display it +#endif + + .set noreorder + .set noat + lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache policy + and a0,a0,COLOR_MASK // isolate color bits + li t0,FLUSH_BASE // get base flush address + or t0,t0,a0 // compute color virtual address + sll t1,a1,ENTRYLO_PFN // shift page frame into position + or t1,t1,PROTECTION_BITS // merge protection bits + or t1,t1,v0 // merge cache policy + and a0,a0,0x1000 // isolate TB entry index + beql zero,a0,10f // if eq, first entry + move t2,zero // set second page table entry + move t2,t1 // set second page table entry + move t1,zero // set first page table entry +10: mfc0 t3,wired // get TB entry index + lw v0,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size + lw t4,KiPcr + PcFirstLevelDcacheFillSize(zero) // get 1st fill size + bnel zero,v0,15f // if ne, second level cache present + move t4,v0 // set purge block size + .set at + .set reorder + +// +// Purge data from the data cache. +// + +15: DISABLE_INTERRUPTS(t5) // disable interrupts + + .set noreorder + .set noat + mfc0 t6,entryhi // get current PID and VPN2 + srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address + sll t7,t7,ENTRYHI_VPN2 // + and t6,t6,0xff << ENTRYHI_PID // isolate current PID + or t7,t7,t6 // merge PID with VPN2 of virtual address + mtc0 t7,entryhi // set VPN2 and PID for probe + mtc0 t1,entrylo0 // set first PTE value + mtc0 t2,entrylo1 // set second PTE value + mtc0 t3,index // set TB index value + nop // fill + tlbwi // write TB entry - 3 cycle hazzard + subu t6,t4,1 // compute block size minus one + and t7,t0,t6 // compute offset in block + addu a2,a2,t6 // round up to next block + addu a2,a2,t7 // + nor t6,t6,zero // complement block size minus one + and a2,a2,t6 // truncate length to even number + beq zero,a2,30f // if eq, no blocks to purge + and t8,t0,t6 // compute starting virtual address + addu t9,t8,a2 // compute ending virtual address + bne zero,v0,40f // if ne, second level cache present + subu t9,t9,t4 // compute ending loop address + +// +// Purge the primary data cache only. +// + +20: cache HIT_INVALIDATE_D,0(t8) // invalidate cache block + bne t8,t9,20b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + +30: ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + +// +// Purge the primary and secondary data caches. +// + + .set noreorder + .set noat +40: cache HIT_INVALIDATE_SD,0(t8) // invalidate cache block + bne t8,t9,40b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + + ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + + .end HalpPurgeDcachePageUni + + SBTTL("Purge Instruction Cache Page") +//++ +// +// VOID +// HalpPurgeIcachePageUni ( +// IN PVOID Color, +// IN ULONG PageFrame, +// IN ULONG Length +// ) +// +// Routine Description: +// +// This function purges (hit/invalidate) up to a page of data from the +// instruction cache. +// +// Arguments: +// +// Color (a0) - Supplies the starting virtual address and color of the +// data that is purged. +// +// PageFrame (a1) - Supplies the page frame number of the page that +// is purged. +// +// Length (a2) - Supplies the length of the region in the page that is +// purged. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalpPurgeIcachePageUni) + +#if DBG + + lw t0,KeIcacheFlushCount // get address of icache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + + la t0, HalpLedAddress // get the address for the LED register + lw t0, 0(t0) + lw t1, KiPcr + PcSetMember(zero) // get a bitmapped value for Processor Number + or t1, t1, PURGE_ICACHE_PAGE // what are we doing ? + xor t1, t1, 0xff // inverse + sb t1, 0(t0) // display it +#endif + + .set noreorder + .set noat + lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache policy + and a0,a0,COLOR_MASK // isolate color bits + li t0,FLUSH_BASE // get base flush address + or t0,t0,a0 // compute color virtual address + sll t1,a1,ENTRYLO_PFN // shift page frame into position + or t1,t1,PROTECTION_BITS // merge protection bits + or t1,t1,v0 // merge cache policy + and a0,a0,0x1000 // isolate TB entry index + beql zero,a0,10f // if eq, first entry + move t2,zero // set second page table entry + move t2,t1 // set second page table entry + move t1,zero // set first page table entry +10: mfc0 t3,wired // get TB entry index + lw v0,KiPcr + PcSecondLevelIcacheFillSize(zero) // get 2nd fill size + lw t4,KiPcr + PcFirstLevelIcacheFillSize(zero) // get 1st fill size + bnel zero,v0,15f // if ne, second level cache present + move t4,v0 // set purge block size + .set at + .set reorder + +// +// Purge data from the instruction cache. +// + +15: DISABLE_INTERRUPTS(t5) // disable interrupts + + .set noreorder + .set noat + mfc0 t6,entryhi // get current PID and VPN2 + srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address + sll t7,t7,ENTRYHI_VPN2 // + and t6,t6,0xff << ENTRYHI_PID // isolate current PID + or t7,t7,t6 // merge PID with VPN2 of virtual address + mtc0 t7,entryhi // set VPN2 and PID for probe + mtc0 t1,entrylo0 // set first PTE value + mtc0 t2,entrylo1 // set second PTE value + mtc0 t3,index // set TB index value + nop // fill + tlbwi // write TB entry - 3 cycle hazzard + subu t6,t4,1 // compute block size minus one + and t7,t0,t6 // compute offset in block + addu a2,a2,t6 // round up to next block + addu a2,a2,t7 // + nor t6,t6,zero // complement block size minus one + and a2,a2,t6 // truncate length to even number + beq zero,a2,30f // if eq, no blocks to purge + and t8,t0,t6 // compute starting virtual address + addu t9,t8,a2 // compute ending virtual address + bne zero,v0,40f // if ne, second level cache present + subu t9,t9,t4 // compute ending loop address + +// +// Purge the primary instruction cache only. +// + +20: cache HIT_INVALIDATE_I,0(t8) // invalidate cache block + bne t8,t9,20b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + +30: ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + +// +// Purge the primary and secondary instruction caches. +// + + .set noreorder + .set noat +40: cache HIT_INVALIDATE_SI,0(t8) // invalidate cache block + bne t8,t9,40b // if ne, more blocks to invalidate + addu t8,t8,t4 // compute next block address + .set at + .set reorder + + ENABLE_INTERRUPTS(t5) // enable interrupts + + j ra // return + + .end HalpPurgeIcachePageUni + + SBTTL("Sweep Data Cache") +//++ +// +// VOID +// HalpSweepDcacheUni ( +// VOID +// ) +// +// Routine Description: +// +// This function sweeps (index/writeback/invalidate) the entire data cache. +// +// Arguments: +// +// None. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalpSweepDcacheUni) + +#if DBG + + lw t0,KeDcacheFlushCount // get address of dcache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + + la t0, HalpLedAddress // get the address for the LED register + lw t0, 0(t0) + lw t1, KiPcr + PcSetMember(zero) // get a bitmapped value for Processor Number + or t1, t1, SWEEP_DCACHE // what are we doing ? + xor t1, t1, 0xff // inverse + sb t1, 0(t0) // display it +#endif + +#if defined(ORION) + DISABLE_INTERRUPTS(t5) +#endif + + lw t0,KiPcr + PcFirstLevelDcacheSize(zero) // get data cache size + lw t1,KiPcr + PcFirstLevelDcacheFillSize(zero) // get block size + li a0,KSEG0_BASE // set starting index value + +#if defined(ORION) + +// +// the size is configured on SNI machines as 16KB +// we invalidate in both sets - so divide the configured size by 2 +// + + srl t0,t0,1 +#endif + addu a1,a0,t0 // compute ending cache address + subu a1,a1,t1 // compute ending block address + + +// +// Sweep the primary data cache. +// + + .set noreorder + .set noat +10: + cache INDEX_WRITEBACK_INVALIDATE_D,0(a0) // writeback/invalidate on index + +#if defined(ORION) + cache INDEX_WRITEBACK_INVALIDATE_D,8192(a0) +#endif + + bne a0,a1,10b // if ne, more to invalidate + addu a0,a0,t1 // compute address of next block + .set at + .set reorder + + + lw t0,KiPcr + PcSecondLevelDcacheSize(zero) // get data cache size + lw t1,KiPcr + PcSecondLevelDcacheFillSize(zero) // get block size + beq zero,t1,30f // if eq, no second level cache + li a0,KSEG0_BASE // set starting index value + addu a1,a0,t0 // compute ending cache address + subu a1,a1,t1 // compute ending block address + +// +// Sweep the secondary data cache. +// + + .set noreorder + .set noat +20: cache INDEX_WRITEBACK_INVALIDATE_SD,0(a0) // writeback/invalidate on index + bne a0,a1,20b // if ne, more to invalidate + addu a0,a0,t1 // compute address of next block + .set at + .set reorder + + +30: +#if defined(ORION) + ENABLE_INTERRUPTS(t5) +#endif + + j ra // return + + .end HalpSweepDcacheUni + + SBTTL("Sweep Data Cache Range") +//++ +// +// VOID +// HalSweepDcacheRange ( +// IN PVOID BaseAddress, +// IN ULONG Length +// ) +// +// Routine Description: +// +// This function sweeps (index/writeback/invalidate) the specified range +// of virtual addresses from the primary data cache. +// +// Arguments: +// +// BaseAddress (a0) - Supplies the base address of the range that is swept +// from the data cache. +// +// Length (a1) - Supplies the length of the range that is swept from the +// data cache. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalSweepDcacheRange) + +#if DBG + + lw t0,KeDcacheFlushCount // get address of dcache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result conditionally + +#endif + +#if defined(ORION) + DISABLE_INTERRUPTS(t5); +#endif + + and a0,a0,COLOR_MASK // isolate color and offset bits + or a0,a0,KSEG0_BASE // convert to physical address + lw t0,KiPcr + PcFirstLevelDcacheFillSize(zero) // get block size + addu a1,a0,a1 // compute ending cache address + subu a1,a1,t0 // compute ending block address + +// +// Sweep the primary data cache. +// + + + .set noreorder + .set noat +10: cache INDEX_WRITEBACK_INVALIDATE_D,0(a0) // writeback/invalidate on index +#if defined(ORION) + cache INDEX_WRITEBACK_INVALIDATE_D,8192(a0) // do other set on Orion +#endif + bne a0,a1,10b // if ne, more to invalidate + addu a0,a0,t0 // compute address of next block + .set at + .set reorder + +#if defined(ORION) + ENABLE_INTERRUPTS(t5); +#endif + j ra // return + + .end HalSweepDcacheRange + + SBTTL("Sweep Instruction Cache") +//++ +// +// VOID +// HalpSweepIcacheUni ( +// VOID +// ) +// +// Routine Description: +// +// This function sweeps (index/invalidate) the entire instruction cache. +// +// Arguments: +// +// None. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalpSweepIcacheUni) + +#if DBG + + lw t0,KeIcacheFlushCount // get address of icache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + + la t0, HalpLedAddress // get the address for the LED register + lw t0, 0(t0) + lw t1, KiPcr + PcSetMember(zero) // get a bitmapped value for Processor Number + or t1, t1, SWEEP_ICACHE // what are we doing ? + xor t1, t1, 0xff // inverse + sb t1, 0(t0) // display it +#endif + +#if defined(ORION) + DISABLE_INTERRUPTS(t5); +#endif + + lw t0,KiPcr + PcSecondLevelIcacheSize(zero) // get instruction cache size + lw t1,KiPcr + PcSecondLevelIcacheFillSize(zero) // get fill size + beq zero,t1,20f // if eq, no second level cache + li a0,KSEG0_BASE // set starting index value + addu a1,a0,t0 // compute ending cache address + subu a1,a1,t1 // compute ending block address + + +// +// Sweep the secondary instruction cache. +// + + .set noreorder + .set noat +10: cache INDEX_INVALIDATE_SI,0(a0) // invalidate cache line + bne a0,a1,10b // if ne, more to invalidate + addu a0,a0,t1 // compute address of next block + .set at + .set reorder + +20: lw t0,KiPcr + PcFirstLevelIcacheSize(zero) // get instruction cache size + lw t1,KiPcr + PcFirstLevelIcacheFillSize(zero) // get fill size + li a0,KSEG0_BASE // set starting index value + +#if defined(ORION) + +// +// the size is configured on SNI machines as 16KB +// we invalidate in both sets - so divide the configured size by 2 +// + + srl t0,t0,1 +#endif + addu a1,a0,t0 // compute ending cache address + subu a1,a1,t1 // compute ending block address + +// +// Sweep the primary instruction cache. +// + + + .set noreorder + .set noat +30: cache INDEX_INVALIDATE_I,0(a0) // invalidate cache line + +#if defined(ORION) + cache INDEX_INVALIDATE_I,8192(a0) +#endif + + bne a0,a1,30b // if ne, more to invalidate + addu a0,a0,t1 // compute address of next block + .set at + .set reorder + +#if defined(ORION) + ENABLE_INTERRUPTS(t5); +#endif + + j ra // return + + .end HalpSweepIcacheUni + + SBTTL("Sweep Instruction Cache Range") +//++ +// +// VOID +// HalSweepIcacheRange ( +// IN PVOID BaseAddress, +// IN ULONG Length +// ) +// +// Routine Description: +// +// This function sweeps (index/invalidate) the specified range of addresses +// from the instruction cache. +// +// Arguments: +// +// BaseAddress (a0) - Supplies the base address of the range that is swept +// from the instruction cache. +// +// Length (a1) - Supplies the length of the range that is swept from the +// instruction cache. +// +// Return Value: +// +// None. +// +//-- + + LEAF_ENTRY(HalSweepIcacheRange) + +#if DBG + + lw t0,KeIcacheFlushCount // get address of icache flush count + lw t1,0(t0) // increment the count of flushes + addu t1,t1,1 // + sw t1,0(t0) // store result + +#endif + +#if defined(ORION) + DISABLE_INTERRUPTS(t5); +#endif + + and a0,a0,COLOR_MASK // isolate color and offset bits + or a0,a0,KSEG0_BASE // convert to physical address + lw t0,KiPcr + PcFirstLevelIcacheFillSize(zero) // get fill size + addu a1,a0,a1 // compute ending cache address + subu a1,a1,t0 // compute ending block address + +// +// Sweep the primary instruction cache. +// + + + .set noreorder + .set noat +10: + + cache INDEX_INVALIDATE_I,0(a0) // invalidate cache line + +#if defined(ORION) + cache INDEX_INVALIDATE_I,8192(a0) // do set B first on Orion +#endif + + bne a0,a1,10b // if ne, more to invalidate + addu a0,a0,t0 // compute address of next block + .set at + .set reorder + +#if defined(ORION) + ENABLE_INTERRUPTS(t5); +#endif + + j ra // return + + .end HalSweepIcacheRange + + + SBTTL("Zero Page") +//++ +// +// VOID +// HalpZeroPageUni ( +// IN PVOID NewColor, +// IN PVOID OldColor, +// IN ULONG PageFrame +// ) +// +// Routine Description: +// +// This function zeros a page of memory. +// +// The algorithm used to zero a page is as follows: +// +// 1. Purge (hit/invalidate) the page from the instruction cache +// using the old color iff the old color is not the same as +// the new color. +// +// 2. Purge (hit/invalidate) the page from the data cache using +// the old color iff the old color is not the same as the new +// color. +// +// 3. Create (create/dirty/exclusive) the page in the data cache +// using the new color. +// +// 4. Write zeros to the page using the new color. +// +// Arguments: +// +// NewColor (a0) - Supplies the page aligned virtual address of the +// new color of the page that is zeroed. +// +// OldColor (a1) - Supplies the page aligned virtual address of the +// old color of the page that is zeroed. +// +// PageFrame (a2) - Supplies the page frame number of the page that +// is zeroed. +// +// Return Value: +// +// None. +// +//-- + + .struct 0 + .space 3 * 4 // fill +ZpRa: .space 4 // saved return address +ZpFrameLength: // length of stack frame +ZpA0: .space 4 // (a0) +ZpA1: .space 4 // (a1) +ZpA2: .space 4 // (a2) +ZpA3: .space 4 // (a3) + + NESTED_ENTRY(HalpZeroPageUni, ZpFrameLength, zero) + + subu sp,sp,ZpFrameLength // allocate stack frame + sw ra,ZpRa(sp) // save return address + + PROLOGUE_END + + and a0,a0,COLOR_BITS // isolate new color bits + and a1,a1,COLOR_BITS // isolate old color bits + sw a0,ZpA0(sp) // save new color bits + sw a1,ZpA1(sp) // save old color bits + sw a2,ZpA2(sp) // save page frame + +// +// If the old page color is not equal to the new page color, then change +// the color of the page. +// + + beq a0,a1,10f // if eq, colors match +// +// Purge the instruction cache using the old page color. +// + + move a0,a1 // set color value + move a1,a2 // set page frame number + li a2,PAGE_SIZE // set length of purge + jal HalPurgeIcachePage // purge instruction cache page + +// +// Flush the data cache using the old page color. +// + + lw a0,ZpA1(sp) // get old color bits + lw a1,ZpA2(sp) // get page frame number + li a2,PAGE_SIZE // set length of purge + jal HalPurgeDcachePage // purge data cache page + +// +// Create dirty exclusive cache blocks and zero the data. +// + +10: lw a3,ZpA0(sp) // get new color bits + lw a1,ZpA2(sp) // get page frame number + + .set noreorder + .set noat + lw v0,KiPcr + PcAlignedCachePolicy(zero) // get cache polciy + li t0,FLUSH_BASE // get base flush address + or t0,t0,a3 // compute new color virtual address + sll t1,a1,ENTRYLO_PFN // shift page frame into position + or t1,t1,PROTECTION_BITS // merge protection bits + or t1,t1,v0 // merge cache policy + and a3,a3,0x1000 // isolate TB entry index + beql zero,a3,20f // if eq, first entry + move t2,zero // set second page table entry + move t2,t1 // set second page table entry + move t1,zero // set first page table entry +20: mfc0 t3,wired // get TB entry index + lw t4,KiPcr + PcFirstLevelDcacheFillSize(zero) // get 1st fill size + lw v0,KiPcr + PcSecondLevelDcacheFillSize(zero) // get 2nd fill size + .set at + .set reorder + + DISABLE_INTERRUPTS(t5) // disable interrupts + + .set noreorder + .set noat + mfc0 t6,entryhi // get current PID and VPN2 + srl t7,t0,ENTRYHI_VPN2 // isolate VPN2 of virtual address + sll t7,t7,ENTRYHI_VPN2 // + and t6,t6,0xff << ENTRYHI_PID // isolate current PID + or t7,t7,t6 // merge PID with VPN2 of virtual address + mtc0 t7,entryhi // set VPN2 and PID for probe + mtc0 t1,entrylo0 // set first PTE value + mtc0 t2,entrylo1 // set second PTE value + mtc0 t3,index // set TB index value + nop // fill + tlbwi // write TB entry - 3 cycle hazzard + addu t9,t0,PAGE_SIZE // compute ending address of block + dmtc1 zero,f0 // set write pattern + bne zero,v0,50f // if ne, second level cache present + and t8,t4,0x10 // test if 16-byte cache block + +// +// Zero page in primary data cache only. +// + + +30: cache CREATE_DIRTY_EXCLUSIVE_D,0(t0) // create cache block + addu t0,t0,t4 // compute next block address + bne zero,t8,40f // if ne, 16-byte cache line + sdc1 f0,-16(t0) // + sdc1 f0,-24(t0) // zero 16 bytes + sdc1 f0,-32(t0) // +40: bne t0,t9,30b // if ne, more blocks to zero + sdc1 f0,-8(t0) // zero 16 bytes + + + .set at + .set reorder + + ENABLE_INTERRUPTS(t5) // enable interrupts + + lw ra,ZpRa(sp) // get return address + addu sp,sp,ZpFrameLength // deallocate stack frame + j ra // return + +// +// Zero page in primary and secondary data caches. +// + + .set noreorder + .set noat + + +50: cache CREATE_DIRTY_EXCLUSIVE_SD,0(t0) // create secondary cache block + addu v1,v0,t0 // compute ending primary block address +60: addu t0,t0,t4 // compute next block address + bne zero,t8,70f // if ne, 16-byte primary cache line + sdc1 f0,-16(t0) // + sdc1 f0,-24(t0) // zero 16 bytes + sdc1 f0,-32(t0) // +70: bne t0,v1,60b // if ne, more primary blocks to zero + sdc1 f0,-8(t0) // zero 16 bytes + bne t0,t9,50b // if ne, more secondary blocks to zero + nop // fill + + .set at + .set reorder + + ENABLE_INTERRUPTS(t5) // enable interrupts + + lw ra,ZpRa(sp) // get return address + addu sp,sp,ZpFrameLength // deallocate stack frame + j ra // return + + .end HalpZeroPageUni |