path: root/private/ntos/nthals/halr98b/mips/rxhwsup.c

/*++

Copyright (c) 1990-1993  Microsoft Corporation

Module Name:

    rxhwsup.c

Abstract:

    This module contains the HalpXxx routines for the NT I/O system that
    are hardware dependent.  Were these routines not hardware dependent,
    they would normally reside in the internal.c module.

Author:



Environment:

    Kernel mode, local to I/O system

Revision History:

   S001 96/2/9 T.Samezima
      -Add TLB limit over check.

--*/

#include "halp.h"
#include "bugcodes.h"
#include "eisa.h"
#include "stdio.h"

//
// Put all code for HAL initialization in the INIT section. It will be
// deallocated by memory management when phase 1 initialization is
// completed.
//

#if defined(ALLOC_PRAGMA)

#pragma alloc_text(INIT, HalpCreateDmaStructures)

#endif

extern POBJECT_TYPE IoAdapterObjectType;

extern ULONG HalpLogicalCPU2PhysicalCPU[];

//
// The DMA controller has a larger number of map registers which may be used
// by any adapter channel.  In order to pool all of the map registers a master
// adapter object is used.  This object is allocated and saved internal to this
// file.  It contains a bit map for allocation of the registers and a queue
// for requests which are waiting for more map registers.  This object is
// allocated during the first request to allocate an adapter.
//

PADAPTER_OBJECT MasterAdapterObject;

//
// The following is the interrupt object used for DMA controller interrupts.
// DMA controller interrupts occur when a memory parity error occurs or a
// programming error occurs to the DMA controller.
//

KINTERRUPT HalpInt0Interrupt;

UCHAR DmaChannelMsg[] = "\nHAL: DMA channel x interrupted.  ";

//
// Pointer to phyiscal memory for map registers.
//

ULONG  HalpMapRegisterPhysicalBase;
ULONG  HalpLogicalAddressLimit = 0; // S001

//
// The following is an array of adapter object structures for the internal DMA
// channels.
//

//
// R98B AdapterObject for PCIBus is per PONCE
//
PADAPTER_OBJECT HalpPciAdapterObject[PONCE_MAX];

IO_ALLOCATION_ACTION
HalpAllocationRoutine (
    IN PDEVICE_OBJECT DeviceObject,
    IN PIRP Irp,
    IN PVOID MapRegisterBase,
    IN PVOID Context
    );

NTSTATUS
HalAllocateAdapterChannel(
    IN PADAPTER_OBJECT AdapterObject,
    IN PWAIT_CONTEXT_BLOCK Wcb,
    IN ULONG NumberOfMapRegisters,
    IN PDRIVER_CONTROL ExecutionRoutine
    )
/*++

Routine Description:

    This routine allocates the adapter channel specified by the adapter object.
    This is accomplished by placing the device object of the driver that wants
    to allocate the adapter on the adapter's queue.  If the queue is already
    "busy", then the adapter has already been allocated, so the device object
    is simply placed onto the queue and waits until the adapter becomes free.

    Once the adapter becomes free (or if it already is), then the driver's
    execution routine is invoked.

    Also, a number of map registers may be allocated to the driver by specifying
    a non-zero value for NumberOfMapRegisters.  Then the map register must be
    allocated from the master adapter.  Once there are a sufficient number of
    map registers available, then the execution routine is called and the
    base address of the allocated map registers in the adapter is also passed
    to the driver's execution routine.

Arguments:

    AdapterObject - Pointer to the adapter control object to allocate to the
        driver.

    Wcb - Supplies a wait context block for saving the allocation parameters.
        The DeviceObject, CurrentIrp and DeviceContext should be initalized.

    NumberOfMapRegisters - The number of map registers that are to be allocated
        from the channel, if any.

    ExecutionRoutine - The address of the driver's execution routine that is
        invoked once the adapter channel (and possibly map registers) have been
        allocated.

Return Value:

    Returns STATUS_SUCESS unless too many map registers are requested.

Notes:

    Note that this routine MUST be invoked at DISPATCH_LEVEL or above.

--*/

{
    PADAPTER_OBJECT MasterAdapter;
    BOOLEAN Busy = FALSE;
    IO_ALLOCATION_ACTION Action;
    LONG MapRegisterNumber;
    KIRQL Irql;

    //
    // Begin by obtaining a pointer to the master adapter associated with this
    // request.
    //

    if (AdapterObject->MasterAdapter != NULL) {
        MasterAdapter = AdapterObject->MasterAdapter;
    } else {
        MasterAdapter = AdapterObject;
    }

    //
    // Initialize the device object's wait context block in case this device
    // must wait before being able to allocate the adapter.
    //

    Wcb->DeviceRoutine = ExecutionRoutine;
    Wcb->NumberOfMapRegisters = NumberOfMapRegisters;

    //
    // Allocate the adapter object for this particular device.  If the
    // adapter cannot be allocated because it has already been allocated
    // to another device, then return to the caller now;  otherwise,
    // continue.
    //

    if (!KeInsertDeviceQueue( &AdapterObject->ChannelWaitQueue,
                              &Wcb->WaitQueueEntry )) {

        //
        // The adapter was not busy so it has been allocated.  Now check
        // to see whether this driver wishes to allocate any map registers.
        // If so, then queue the device object to the master adapter queue
        // to wait for them to become available.  If the driver wants map
        // registers, ensure that this adapter has enough total map registers
        // to satisfy the request.
        //

        AdapterObject->CurrentWcb = Wcb;
        AdapterObject->NumberOfMapRegisters = Wcb->NumberOfMapRegisters;

        if (NumberOfMapRegisters != 0) {
            if (NumberOfMapRegisters > MasterAdapter->MapRegistersPerChannel) {
                AdapterObject->NumberOfMapRegisters = 0;
                IoFreeAdapterChannel(AdapterObject);
                return(STATUS_INSUFFICIENT_RESOURCES);
            }

            //
            // Lock the map register bit map and the adapter queue in the
            // master adapter object. The channel structure offset is used as
            // a hint for the register search.
            //

            KeAcquireSpinLock( &MasterAdapter->SpinLock, &Irql );

            MapRegisterNumber = -1;

            if (IsListEmpty( &MasterAdapter->AdapterQueue)) {

               MapRegisterNumber = RtlFindClearBitsAndSet(
                    MasterAdapter->MapRegisters,
                    NumberOfMapRegisters,
                    (0x100000 / PAGE_SIZE)
                    );

               //
               // Make sure this map register is valid for this adapter.
               // No Check !! R98B 0-1M Never Free

            }

            if (MapRegisterNumber == -1) {

               //
               // There were not enough free map registers.  Queue this request
               // on the master adapter where is will wait until some registers
               // are deallocated.
               //

               InsertTailList( &MasterAdapter->AdapterQueue,
                               &AdapterObject->AdapterQueue
                               );
               Busy = 1;

            } else {
               AdapterObject->MapRegisterBase = (PVOID) ((PTRANSLATION_ENTRY) MasterAdapter->MapRegisterBase + MapRegisterNumber);
            }

            KeReleaseSpinLock( &MasterAdapter->SpinLock, Irql );
        }

        //
        // If there were either enough map registers available or no map
        // registers needed to be allocated, invoke the driver's execution
        // routine now.
        //

        if (!Busy) {

            Action = ExecutionRoutine( Wcb->DeviceObject,
                                       Wcb->CurrentIrp,
                                       AdapterObject->MapRegisterBase,
                                       Wcb->DeviceContext
                                       );

            //
            // If the driver wishes to keep the map registers then set the number
            // allocated to zero and set the action to deallocate object.
            //

            if (Action == DeallocateObjectKeepRegisters) {
                AdapterObject->NumberOfMapRegisters = 0;
                Action = DeallocateObject;
            }

            //
            // If the driver would like to have the adapter deallocated,
            // then deallocate any map registers allocated and then release
            // the adapter object.
            //

            if (Action == DeallocateObject) {
                IoFreeAdapterChannel( AdapterObject );
            }
        }
    }

    return(STATUS_SUCCESS);

}

PVOID
HalAllocateCommonBuffer(
    IN PADAPTER_OBJECT AdapterObject,
    IN ULONG Length,
    OUT PPHYSICAL_ADDRESS LogicalAddress,
    IN BOOLEAN CacheEnabled
    )
/*++

Routine Description:

    This function allocates the memory for a common buffer and maps so that it
    can be accessed by a master device and the CPU.

Arguments:

    AdapterObject - Supplies a pointer to the adapter object used by this
        device.

    Length - Supplies the length of the common buffer to be allocated.

    LogicalAddress - Returns the logical address of the common buffer.

    CacheEnable - Indicates whether the memeory is cached or not.

Return Value:

    Returns the virtual address of the common buffer.  If the buffer cannot be
    allocated then NULL is returned.

--*/

{
    PVOID virtualAddress;
    PVOID mapRegisterBase;
    ULONG numberOfMapRegisters;
    ULONG mappedLength;
    WAIT_CONTEXT_BLOCK wcb;
    KEVENT allocationEvent;
    NTSTATUS status;
    PMDL mdl;
    KIRQL irql;

    numberOfMapRegisters = BYTES_TO_PAGES(Length);

    //
    // R98B Must Be     Cached!!
    //
    CacheEnabled =TRUE;

    //
    // Allocate the actual buffer.
    //

    if (CacheEnabled != FALSE) {
        virtualAddress = ExAllocatePool(NonPagedPoolCacheAligned, Length);

    } else {
        virtualAddress = MmAllocateNonCachedMemory(Length);
    }


    if (virtualAddress == NULL) {
        return(virtualAddress);

    }

    //
    // Initialize an event.
    //

    KeInitializeEvent( &allocationEvent, NotificationEvent, FALSE);

    //
    // Initialize the wait context block.  Use the device object to indicate
    // where the map register base should be stored.
    //

    wcb.DeviceObject = &mapRegisterBase;
    wcb.CurrentIrp = NULL;
    wcb.DeviceContext = &allocationEvent;

    //
    // Allocate the adapter and the map registers.
    //

    KeRaiseIrql(DISPATCH_LEVEL, &irql);

    status = HalAllocateAdapterChannel(
        AdapterObject,
        &wcb,
        numberOfMapRegisters,
        HalpAllocationRoutine
        );

    KeLowerIrql(irql);

    if (!NT_SUCCESS(status)) {

        //
        // Cleanup and return NULL.
        //

        if (CacheEnabled != FALSE) {
            ExFreePool(virtualAddress);

        } else {
            MmFreeNonCachedMemory(virtualAddress, Length);
        }

        return(NULL);

    }

    //
    // Wait for the map registers to be allocated.
    //

    status = KeWaitForSingleObject(
        &allocationEvent,
        Executive,
        KernelMode,
        FALSE,
        NULL
        );

    if (!NT_SUCCESS(status)) {

        //
        // Cleanup and return NULL.
        //

        if (CacheEnabled != FALSE) {
            ExFreePool(virtualAddress);

        } else {
            MmFreeNonCachedMemory(virtualAddress, Length);
        }

        return(NULL);

    }

    //
    // Create an mdl to use with call to I/O map transfer.
    //

    mdl = IoAllocateMdl(
        virtualAddress,
        Length,
        FALSE,
        FALSE,
        NULL
        );

    MmBuildMdlForNonPagedPool(mdl);

    //
    // Map the transfer so that the controller can access the memory.
    //

    mappedLength = Length;
    *LogicalAddress = IoMapTransfer(
        NULL,
        mdl,
        mapRegisterBase,
        virtualAddress,
        &mappedLength,
        TRUE
        );

    IoFreeMdl(mdl);

    if (mappedLength < Length) {

        //
        // Cleanup and indicate that the allocation failed.
        //

        HalFreeCommonBuffer(
            AdapterObject,
            Length,
            *LogicalAddress,
            virtualAddress,
            CacheEnabled
            );

        return(NULL);
    }

    //
    // The allocation completed successfully.
    //

    return(virtualAddress);

}

PVOID
HalAllocateCrashDumpRegisters(
    IN PADAPTER_OBJECT AdapterObject,
    IN PULONG NumberOfMapRegisters
    )
/*++

Routine Description:

    This routine is called during the crash dump disk driver's initialization
    to allocate a number map registers permanently.

Arguments:

    AdapterObject - Pointer to the adapter control object to allocate to the
        driver.
    NumberOfMapRegisters - Number of map registers requested and update to show
        number actually allocated.

Return Value:

    Returns STATUS_SUCESS if map registers allocated.

--*/

{
    PADAPTER_OBJECT MasterAdapter;
    ULONG MapRegisterNumber;

    //
    // Begin by obtaining a pointer to the master adapter associated with this
    // request.
    //

    if (AdapterObject->MasterAdapter) {
        MasterAdapter = AdapterObject->MasterAdapter;
    } else {
        MasterAdapter = AdapterObject;
    }

    //
    // Ensure that this adapter has enough total map registers to satisfy
    // the request.
    //

    if (*NumberOfMapRegisters > AdapterObject->MapRegistersPerChannel) {
        AdapterObject->NumberOfMapRegisters = 0;
        return NULL;
    }

    //
    // Attempt to allocate the required number of map registers w/o
    // affecting those registers that were allocated when the system
    // crashed.  Note that once again the map registers to be allocated
    // must be above the 1MB range if this is an EISA bus device.
    // R98

    MapRegisterNumber = (ULONG)-1;

    MapRegisterNumber = RtlFindClearBitsAndSet(
         MasterAdapter->MapRegisters,
         *NumberOfMapRegisters,
         (0x100000 / PAGE_SIZE)
         );

    //
    // Ensure that any allocated map registers are valid for this adapter.
    // No Check. R98B 0-1M Never Free!!.

    if (MapRegisterNumber == (ULONG)-1) {

        //
        // Not enough free map registers were found, so they were busy
        // being used by the system when it crashed.  Force the appropriate
        // number to be "allocated" at the base by simply overjamming the
        // bits and return the base map register as the start.
        //

        RtlSetBits(
            MasterAdapter->MapRegisters,
            (0x100000 / PAGE_SIZE),
            *NumberOfMapRegisters
            );
        MapRegisterNumber =(0x100000 / PAGE_SIZE) ;

    }

    //
    // Calculate the map register base from the allocated map
    // register and base of the master adapter object.
    //

    AdapterObject->MapRegisterBase = (PVOID) ((PTRANSLATION_ENTRY) MasterAdapter->MapRegisterBase + MapRegisterNumber);

    return AdapterObject->MapRegisterBase;
}

BOOLEAN
HalFlushCommonBuffer(
    IN PADAPTER_OBJECT AdapterObject,
    IN ULONG Length,
    IN PHYSICAL_ADDRESS LogicalAddress,
    IN PVOID VirtualAddress
    )
/*++

Routine Description:

    This function is called to flush any hardware adapter buffers when the
    driver needs to read data written by an I/O master device to a common
    buffer.

Arguments:

    AdapterObject - Supplies a pointer to the adapter object used by this
        device.

    Length - Supplies the length of the common buffer. This should be the same
        value used for the allocation of the buffer.

    LogicalAddress - Supplies the logical address of the common buffer.  This
        must be the same value return by HalAllocateCommonBuffer.

    VirtualAddress - Supplies the virtual address of the common buffer.  This
        must be the same value return by HalAllocateCommonBuffer.

Return Value:

    Returns TRUE if no errors were detected; otherwise, FALSE is return.

--*/

{

    return(TRUE);

}

VOID
HalFreeCommonBuffer(
    IN PADAPTER_OBJECT AdapterObject,
    IN ULONG Length,
    IN PHYSICAL_ADDRESS LogicalAddress,
    IN PVOID VirtualAddress,
    IN BOOLEAN CacheEnabled
    )
/*++

Routine Description:

    This function frees a common buffer and all of the resouces it uses.

Arguments:

    AdapterObject - Supplies a pointer to the adapter object used by this
        device.

    Length - Supplies the length of the common buffer. This should be the same
        value used for the allocation of the buffer.

    LogicalAddress - Supplies the logical address of the common buffer.  This
        must be the same value return by HalAllocateCommonBuffer.

    VirtualAddress - Supplies the virtual address of the common buffer.  This
        must be the same value return by HalAllocateCommonBuffer.

    CacheEnable - Indicates whether the memeory is cached or not.

Return Value:

    None

--*/

{
    PTRANSLATION_ENTRY mapRegisterBase;
    ULONG numberOfMapRegisters;
    ULONG mapRegisterNumber;


    //
    // R98B Must Be     Cached!!
    //
    CacheEnabled =TRUE;

    //
    // Calculate the number of map registers, the map register number and
    // the map register base.
    //

    numberOfMapRegisters = ADDRESS_AND_SIZE_TO_SPAN_PAGES(VirtualAddress, Length);
    mapRegisterNumber = LogicalAddress.LowPart >> PAGE_SHIFT;

    mapRegisterBase = (PTRANSLATION_ENTRY) MasterAdapterObject->MapRegisterBase
        + mapRegisterNumber;

    //
    // Free the map registers.
    //

    IoFreeMapRegisters(
        AdapterObject,
        (PVOID) mapRegisterBase,
        numberOfMapRegisters
        );

    //
    // Free the memory for the common buffer.
    //

    if (CacheEnabled != FALSE) {
        ExFreePool(VirtualAddress);

    } else {
        MmFreeNonCachedMemory(VirtualAddress, Length);
    }

    return;

}

PADAPTER_OBJECT
HalGetAdapter(
    IN PDEVICE_DESCRIPTION DeviceDescription,
    IN OUT PULONG NumberOfMapRegisters
    )

/*++

Routine Description:

    This function returns the appropriate adapter object for the device defined
    in the device description structure.  Three bus types are supported for the
    system: Internal, Isa, and Eisa.

Arguments:

    DeviceDescription - Supplies a description of the deivce.

    NumberOfMapRegisters - Returns the maximum number of map registers which
        may be allocated by the device driver.

Return Value:

    A pointer to the requested adapter object or NULL if an adapter could not
    be created.

--*/

{
    PADAPTER_OBJECT adapterObject;
    ULONG           Ponce;

    //
    // Make sure this is the correct version.
    //

    if (DeviceDescription->Version > DEVICE_DESCRIPTION_VERSION1) {

        return(NULL);

    }

    //
    // Return number of map registers requested based on the maximum
    // transfer length.
    //

    *NumberOfMapRegisters = BYTES_TO_PAGES(DeviceDescription->MaximumLength) + 1;

    if (*NumberOfMapRegisters > DMA_REQUEST_LIMIT ) {
#if DBG
        DbgPrint("NumberOfMapRegister REQUEST = 0x%x\n",*NumberOfMapRegisters);
#endif
        *NumberOfMapRegisters = DMA_REQUEST_LIMIT;


    }

    if (DeviceDescription->InterfaceType == PCIBus) {

        //
        // Create a PCI adapter object.
        //
        Ponce = HalpPonceNumber(DeviceDescription->BusNumber);

        if (HalpPciAdapterObject[Ponce] == NULL) {
            adapterObject = HalpAllocateAdapter(0, &HalpPciAdapterObject[Ponce], NULL);
            HalpPciAdapterObject[Ponce] = adapterObject;

        } else {
            adapterObject = HalpPciAdapterObject[Ponce];

        }

        return(adapterObject);

    }
    //
    // If the request is for a unsupported bus then return NULL.
    //

    if (DeviceDescription->InterfaceType != Isa &&
        DeviceDescription->InterfaceType != Eisa &&
        //
        // R98B Internal(Xbus) floppy used ESC DMAC channel 2
        //
        (DeviceDescription->InterfaceType == Internal && (DeviceDescription->DmaChannel !=2))
        ) {

        //
        // This bus type is unsupported return NULL.
        //

        return(NULL);
    }

    //
    // Create an adapter object.
    //

    adapterObject = HalpAllocateEisaAdapter( DeviceDescription );
//
// USE Limit DMA_REQUEST_LIMIT
//
//
#if 0
     if (*NumberOfMapRegisters > MasterAdapterObject->MapRegistersPerChannel / EISA_MAX_DEVICE) {

         *NumberOfMapRegisters = MasterAdapterObject->MapRegistersPerChannel / EISA_MAX_DEVICE;
     }
#endif
    return(adapterObject);
}

PADAPTER_OBJECT
HalpAllocateAdapter(
    IN ULONG MapRegistersPerChannel,
    IN PVOID AdapterBaseVa,
    IN PVOID MapRegisterBase
    )

/*++

Routine Description:

    This routine allocates and initializes an adapter object to represent an
    adapter or a DMA controller on the system.

Arguments:

    MapRegistersPerChannel - Unused.

    AdapterBaseVa - Base virtual address of the adapter itself.  If AdapterBaseVa
       is NULL then the MasterAdapterObject is allocated.

    MapRegisterBase - Unused.

Return Value:

    The function value is a pointer to the allocate adapter object.

--*/

{

    PADAPTER_OBJECT AdapterObject;
    OBJECT_ATTRIBUTES ObjectAttributes;
    ULONG Size;
    ULONG BitmapSize;
    HANDLE Handle;
    NTSTATUS Status;
    ULONG Mode;
    ULONG Ponce;
    PTRANSLATION_ENTRY PageTableEntry;
    ULONG i;
    ULONG NodeMask;

    ULONG tst; //SNES
    //
    // Initalize the master adapter if necessary.
    //

    if (MasterAdapterObject == NULL && AdapterBaseVa != NULL ) {

       MasterAdapterObject = HalpAllocateAdapter( 0,
                                          NULL,
                                          NULL
                                          );

       //
       // If we could not allocate the master adapter then give up.
       //

       if (MasterAdapterObject == NULL) {
          return(NULL);
       }
    }

    //
    // Begin by initializing the object attributes structure to be used when
    // creating the adapter object.
    //

    InitializeObjectAttributes( &ObjectAttributes,
                                NULL,
                                OBJ_PERMANENT,
                                (HANDLE) NULL,
                                (PSECURITY_DESCRIPTOR) NULL
                              );

    //
    // Determine the size of the adapter object. If this is the master object
    // then allocate space for the register bit map; otherwise, just allocate
    // an adapter object.
    //

    if (AdapterBaseVa == NULL) {

        BitmapSize = (((sizeof( RTL_BITMAP ) +
            ((DMA_TRANSLATION_LIMIT / sizeof( TRANSLATION_ENTRY)) + 7 >> 3))
            + 3) & ~3);

        Size = sizeof( ADAPTER_OBJECT ) + BitmapSize;

    } else {

        Size = sizeof( ADAPTER_OBJECT );

    }

    //
    // Now create the adapter object.
    //

    Status = ObCreateObject( KernelMode,
                             *((POBJECT_TYPE *)IoAdapterObjectType),
                             &ObjectAttributes,
                             KernelMode,
                             (PVOID) NULL,
                             Size,
                             0,
                             0,
                             (PVOID *)&AdapterObject );

    //
    // Reference the object.
    //

    if (NT_SUCCESS(Status)) {

        Status = ObReferenceObjectByPointer(
            AdapterObject,
            FILE_READ_DATA | FILE_WRITE_DATA,
            *((POBJECT_TYPE *)IoAdapterObjectType),
            KernelMode
            );

    }

    //
    // If the adapter object was successfully created, then attempt to insert
    // it into the the object table.
    //

    if (NT_SUCCESS( Status )) {

        Status = ObInsertObject( AdapterObject,
                                 NULL,
                                 FILE_READ_DATA | FILE_WRITE_DATA,
                                 0,
                                 (PVOID *) NULL,
                                 &Handle );

        if (NT_SUCCESS( Status )) {

            ZwClose( Handle );

            //
            // Initialize the adapter object itself.
            //

            AdapterObject->Type = IO_TYPE_ADAPTER;
            AdapterObject->Size = (USHORT) Size;
            AdapterObject->MapRegistersPerChannel =
                DMA_TRANSLATION_LIMIT / sizeof( TRANSLATION_ENTRY);
            AdapterObject->AdapterBaseVa = AdapterBaseVa;
            AdapterObject->MasterAdapter = MasterAdapterObject;
            AdapterObject->PagePort = NULL;

            //
            // Initialize the channel wait queue for this
            // adapter.
            //

            KeInitializeDeviceQueue( &AdapterObject->ChannelWaitQueue );

            //
            // If this is the MasterAdatper then initialize the register bit map,
            // AdapterQueue and the spin lock.
            //

            if ( AdapterBaseVa == NULL ) {
                ULONG MapRegisterSize;

                KeInitializeSpinLock( &AdapterObject->SpinLock );

                InitializeListHead( &AdapterObject->AdapterQueue );

                AdapterObject->MapRegisters = (PVOID) ( AdapterObject + 1);
                RtlInitializeBitMap( AdapterObject->MapRegisters,
                                     (PULONG) (((PCHAR) (AdapterObject->MapRegisters)) + sizeof( RTL_BITMAP )),
                                     DMA_TRANSLATION_LIMIT / sizeof( TRANSLATION_ENTRY)
                                     );
                RtlClearAllBits( AdapterObject->MapRegisters );
                // R98B
                // Reserv 0 - (1M-1) Logical addr!!.
                //
                RtlSetBits (
                            AdapterObject->MapRegisters,
                            0x0,        // Start 0
                            0x100       // 256 is 1M
                           );
                // R98B
                // Reserv 15M - (16M-1) Logical addr!!.
                //
                //RtlSetBits (
                //            AdapterObject->MapRegisters,
                //            0xF00,     // Start 15M
                //            0x100      // END   16M-1
                //);

                // R98B
                // Reserv Last 1 Logical addr!!. For PCEB Prefetch Cycle.
                //
                RtlSetBits (
                            AdapterObject->MapRegisters,
                            DMA_TRANSLATION_LIMIT/(sizeof(TRANSLATION_ENTRY))-1, // Last 1 page.
                            0x1                                                  // 1 page Reserved.
                );

                //
                // The memory for the map registers was allocated by
                // HalpAllocateMapRegisters during phase 0 initialization.
                //

                MapRegisterSize = DMA_TRANSLATION_LIMIT;
                MapRegisterSize = ROUND_TO_PAGES(MapRegisterSize);

                //
                // Convert the physical address to a non-cached virtual address.
                // R98B Page Table must be Cached!!.
                //
                AdapterObject->MapRegisterBase = (PVOID)
                     (HalpMapRegisterPhysicalBase | KSEG0_BASE);

                //
                // N.B   This Version Selected
                //       PCEB Prefetch cycle may be Cause TLB refill!!.
                //       So Set Valid Bit All Entry.as We could't invalid transfer.
                //                                                ~~~~~~~~~~~~~~~~~
                // Another aprouch.
                //       When Request Mapregster at "NumberOfMapregister"
                //       reserve  NumberOfMapregster+1.This one page for PCEB Prefetch
                //       cycle. Driver unknown plus 1 page. Hal know only.
                //
                PageTableEntry= (PTRANSLATION_ENTRY)AdapterObject->MapRegisterBase;

                for(i=0;i< DMA_TRANSLATION_LIMIT/ sizeof( TRANSLATION_ENTRY); i++){
                    (PageTableEntry)->PageFrame = (ULONG) PAGE_TABLE_ENTRY_VALID;
                    (PageTableEntry)->Fill      = (ULONG) 0;
                    PageTableEntry++;
                }
#if defined(DBG5)
                DbgPrint("HAL Channel init Master\n");
                DbgPrint("HAL Page Table is 0x%x\n",AdapterObject->MapRegisterBase);
#endif

                for(Ponce=0;Ponce < HalpNumberOfPonce; Ponce++){
                    //
                    // I/O TLB Page Table Base Set.
                    //
#if defined(DBG5)
                    DbgPrint("HAL:Ponce No = 0x%x  PTBSR addr =0x%x\n",Ponce,(PULONG)&PONCE_CNTL(Ponce)->PTBSR);
#endif

                    WRITE_REGISTER_ULONG(
                                         (PULONG)&PONCE_CNTL(Ponce)->PTBSR,
                                         (HalpMapRegisterPhysicalBase) >> 1 //SNES
                     );
#if defined(DBG5)
                    DbgPrint("HAL:Ponce No = 0x%x  PTLMR addr =0x%x\n",Ponce,(PULONG)&PONCE_CNTL(Ponce)->PTLMR);

                    tst=READ_REGISTER_ULONG(
                                            (PULONG)&PONCE_CNTL(Ponce)->PMODR,
                                           );

                    DbgPrint("HAL:Ponce No = 0x%x  PMODR data =0x%x\n",Ponce,tst);
                    tst |= 0x10000000;

                    //
                    // I/O TLB Page Table Limit
                    //
                    WRITE_REGISTER_ULONG(
                                         (PULONG)&PONCE_CNTL(Ponce)->PMODR,
                                         tst
                                         );
#endif

                    //
                    // I/O TLB Page Table Limit
                    //
                    WRITE_REGISTER_ULONG(
                                         (PULONG)&PONCE_CNTL(Ponce)->PTLMR,
                                         ((HalpMapRegisterPhysicalBase+MapRegisterSize)) >>1
                                        );
#if defined(DBG5)
                    DbgPrint("HAL:Ponce No = 0x%x  TFLSR addr =0x%x\n",Ponce,(PULONG)&PONCE_CNTL(Ponce)->TFLSR);
#endif

                    //
                    // I/O TLB Entry All Flush!!
                    //
                    WRITE_REGISTER_ULONG(
                                         (PULONG)&PONCE_CNTL(Ponce)->TFLSR,
                                         0x1
                                        );
                    //
                    // Enable I/O TLB error.
                    //
                    NodeMask = 0;
                    for(i=0; i < **((PULONG *)(&KeNumberProcessors)); i++){
                        NodeMask |= 0x10 << HalpLogicalCPU2PhysicalCPU[i];
                    }
                    WRITE_REGISTER_ULONG( (PULONG)&PONCE_CNTL(0)->ERITTG[1], NodeMask );
                    WRITE_REGISTER_ULONG( (PULONG)&PONCE_CNTL(1)->ERITTG[1], NodeMask );
                }
            }
        } else {

            //
            // An error was incurred for some reason.  Set the return value
            // to NULL.
            //

            AdapterObject = (PADAPTER_OBJECT) NULL;
        }
    } else {
        AdapterObject = (PADAPTER_OBJECT) NULL;
    }
    return AdapterObject;

    return (PADAPTER_OBJECT) NULL;
}

VOID
IoFreeMapRegisters(
   PADAPTER_OBJECT AdapterObject,
   PVOID MapRegisterBase,
   ULONG NumberOfMapRegisters
   )
/*++

Routine Description:

   This routine deallocates the map registers for the adapter.  If there are
   any queued adapter waiting for an attempt is made to allocate the next
   entry.

Arguments:

   AdapterObject - The adapter object to where the map register should be
        returned.

   MapRegisterBase - The map register base of the registers to be deallocated.

   NumberOfMapRegisters - The number of registers to be deallocated.

Return Value:

   None

--+*/

{
   PADAPTER_OBJECT MasterAdapter;
   LONG MapRegisterNumber;
   PLIST_ENTRY Packet;
   IO_ALLOCATION_ACTION Action;
   PWAIT_CONTEXT_BLOCK Wcb;
   KIRQL Irql;



    //
    // Begin by getting the address of the master adapter.
    //

    if (AdapterObject->MasterAdapter != NULL) {
        MasterAdapter = AdapterObject->MasterAdapter;
    } else {
        MasterAdapter = AdapterObject;
    }

   MapRegisterNumber = (PTRANSLATION_ENTRY) MapRegisterBase -
               (PTRANSLATION_ENTRY) MasterAdapter->MapRegisterBase;

   //
   // Acquire the master adapter spinlock which locks the adapter queue and the
   // bit map for the map registers.
   //

   KeAcquireSpinLock(&MasterAdapter->SpinLock, &Irql);

   //
   // Return the registers to the bit map.
   //

   RtlClearBits( MasterAdapter->MapRegisters,
                 MapRegisterNumber,
                 NumberOfMapRegisters
                 );

   //
   // Process any requests waiting for map registers in the adapter queue.
   // Requests are processed until a request cannot be satisfied or until
   // there are no more requests in the queue.
   //

   while(TRUE) {

      if ( IsListEmpty(&MasterAdapter->AdapterQueue) ){
         break;
      }

      Packet = RemoveHeadList( &MasterAdapter->AdapterQueue );
      AdapterObject = CONTAINING_RECORD( Packet,
                                         ADAPTER_OBJECT,
                                         AdapterQueue
                                         );
      Wcb = AdapterObject->CurrentWcb;

      //
      // Attempt to allocate map registers for this request. Use the previous
      // register base as a hint.
      //
      // R98B mapregiser allways allocated 1M.
      // 0-1M reserved hal.
      //

      MapRegisterNumber = RtlFindClearBitsAndSet(
            MasterAdapter->MapRegisters,
            NumberOfMapRegisters,
            0x100000 / PAGE_SIZE
            );

       //
       // Make sure this map register is valid for this adapter.
       // No Check. Because 0-1M was never free.

      if (MapRegisterNumber == -1) {

         //
         // There were not enough free map registers.  Put this request back on
         // the adapter queue where is came from.
         //

         InsertHeadList( &MasterAdapter->AdapterQueue,
                         &AdapterObject->AdapterQueue
                         );

         break;

      }

     KeReleaseSpinLock( &MasterAdapter->SpinLock, Irql );

     AdapterObject->MapRegisterBase = (PVOID) ((PTRANSLATION_ENTRY) MasterAdapter->MapRegisterBase + MapRegisterNumber);

     //
     // Invoke the driver's execution routine now.
     //

     Action = Wcb->DeviceRoutine( Wcb->DeviceObject,
        Wcb->CurrentIrp,
        AdapterObject->MapRegisterBase,
        Wcb->DeviceContext
        );

      //
      // If the driver wishes to keep the map registers then set the number
      // allocated to zero and set the action to deallocate object.
      //

      if (Action == DeallocateObjectKeepRegisters) {
          AdapterObject->NumberOfMapRegisters = 0;
          Action = DeallocateObject;
      }

      //
      // If the driver would like to have the adapter deallocated,
      // then deallocate any map registers allocated and then release
      // the adapter object.
      //

      if (Action == DeallocateObject) {

             //
             // The map registers registers are deallocated here rather than in
             // IoFreeAdapterChannel.  This limits the number of times
             // this routine can be called recursively possibly overflowing
             // the stack.  The worst case occurs if there is a pending
             // request for the adapter that uses map registers and whos
             // excution routine decallocates the adapter.  In that case if there
             // are no requests in the master adapter queue, then IoFreeMapRegisters
             // will get called again.
             //

          if (AdapterObject->NumberOfMapRegisters != 0) {

             //
             // Deallocate the map registers and clear the count so that
             // IoFreeAdapterChannel will not deallocate them again.
             //

             KeAcquireSpinLock( &MasterAdapter->SpinLock, &Irql );

             RtlClearBits( MasterAdapter->MapRegisters,
                           MapRegisterNumber,
                           AdapterObject->NumberOfMapRegisters
                           );

             AdapterObject->NumberOfMapRegisters = 0;

             KeReleaseSpinLock( &MasterAdapter->SpinLock, Irql );
          }

          IoFreeAdapterChannel( AdapterObject );
      }

      KeAcquireSpinLock( &MasterAdapter->SpinLock, &Irql );

   }

   KeReleaseSpinLock( &MasterAdapter->SpinLock, Irql );
}

VOID
IoFreeAdapterChannel(
    IN PADAPTER_OBJECT AdapterObject
    )

/*++

Routine Description:

    This routine is invoked to deallocate the specified adapter object.
    Any map registers that were allocated are also automatically deallocated.
    No checks are made to ensure that the adapter is really allocated to
    a device object.  However, if it is not, then kernel will bugcheck.

    If another device is waiting in the queue to allocate the adapter object
    it will be pulled from the queue and its execution routine will be
    invoked.

Arguments:

    AdapterObject - Pointer to the adapter object to be deallocated.

Return Value:

    None.

--*/

{
    PKDEVICE_QUEUE_ENTRY Packet;
    PADAPTER_OBJECT MasterAdapter;
    BOOLEAN Busy = FALSE;
    IO_ALLOCATION_ACTION Action;
    PWAIT_CONTEXT_BLOCK Wcb;
    KIRQL Irql;
    LONG MapRegisterNumber;


    //
    // Begin by getting the address of the master adapter.
    //

    if (AdapterObject->MasterAdapter != NULL) {
        MasterAdapter = AdapterObject->MasterAdapter;
    } else {
        MasterAdapter = AdapterObject;
    }

    //
    // Pull requests of the adapter's device wait queue as long as the
    // adapter is free and there are sufficient map registers available.
    //

    while( TRUE ){

       //
       // Begin by checking to see whether there are any map registers that
       // need to be deallocated.  If so, then deallocate them now.
       //

       if (AdapterObject->NumberOfMapRegisters != 0) {
           IoFreeMapRegisters( AdapterObject,
                               AdapterObject->MapRegisterBase,
                               AdapterObject->NumberOfMapRegisters
                               );
       }

       //
       // Simply remove the next entry from the adapter's device wait queue.
       // If one was successfully removed, allocate any map registers that it
       // requires and invoke its execution routine.
       //

       Packet = KeRemoveDeviceQueue( &AdapterObject->ChannelWaitQueue );
       if (Packet == NULL) {

           //
           // There are no more requests break out of the loop.
           //

           break;
       }

       Wcb = CONTAINING_RECORD( Packet,
            WAIT_CONTEXT_BLOCK,
            WaitQueueEntry );

       AdapterObject->CurrentWcb = Wcb;
       AdapterObject->NumberOfMapRegisters = Wcb->NumberOfMapRegisters;

        //
        // Check to see whether this driver wishes to allocate any map
        // registers.  If so, then queue the device object to the master
        // adapter queue to wait for them to become available.  If the driver
        // wants map registers, ensure that this adapter has enough total
        // map registers to satisfy the request.
        //

        if (Wcb->NumberOfMapRegisters != 0) {
            if (Wcb->NumberOfMapRegisters > MasterAdapter->MapRegistersPerChannel) {
                KeBugCheck( INSUFFICIENT_SYSTEM_MAP_REGS );
            }

            //
            // Lock the map register bit map and the adapter queue in the
            // master adapter object. The channel structure offset is used as
            // a hint for the register search.
            //

            KeAcquireSpinLock( &MasterAdapter->SpinLock, &Irql );

            MapRegisterNumber = -1;

            if (IsListEmpty( &MasterAdapter->AdapterQueue)) {

               MapRegisterNumber = RtlFindClearBitsAndSet(
                    MasterAdapter->MapRegisters,
                    Wcb->NumberOfMapRegisters,
                    0x100000 / PAGE_SIZE
                    );

               //
               // Make sure this map register is valid for this adapter.
               // R98B No Check!!. 0-1M Never free!!
               //

            }

            if (MapRegisterNumber == -1) {

               //
               // There were not enough free map registers.  Queue this request
               // on the master adapter where is will wait until some registers
               // are deallocated.
               //

               InsertTailList( &MasterAdapter->AdapterQueue,
                               &AdapterObject->AdapterQueue
                               );
               Busy = 1;

            } else {
               AdapterObject->MapRegisterBase = (PVOID) ((PTRANSLATION_ENTRY) MasterAdapter->MapRegisterBase + MapRegisterNumber);
            }

            KeReleaseSpinLock( &MasterAdapter->SpinLock, Irql );
        }

        //
        // If there were either enough map registers available or no map
        // registers needed to be allocated, invoke the driver's execution
        // routine now.
        //

        if (!Busy) {
            AdapterObject->CurrentWcb = Wcb;
            Action = Wcb->DeviceRoutine( Wcb->DeviceObject,
                Wcb->CurrentIrp,
                AdapterObject->MapRegisterBase,
                Wcb->DeviceContext
                );

            //
            // If the execution routine would like to have the adapter
            // deallocated, then release the adapter object.
            //

            if (Action == KeepObject) {

               //
               // This request wants to keep the channel a while so break
               // out of the loop.
               //

               break;
            }

            //
            // If the driver wants to keep the map registers then set the
            // number allocated to 0.  This keeps the deallocation routine
            // from deallocating them.
            //

            if (Action == DeallocateObjectKeepRegisters) {
                AdapterObject->NumberOfMapRegisters = 0;
            }
        } else {

           //
           // This request did not get the requested number of map registers so
           // out of the loop.
           //

           break;
        }
    }
}

BOOLEAN
HalpCreateDmaStructures (
    VOID
    )

/*++

Routine Description:

    This routine initializes the structures necessary for DMA operations
    and connects the intermediate interrupt dispatcher.  It also connects
    an interrupt handler to the DMA channel interrupt.

Arguments:

    None.

Return Value:

    If the second level interrupt dispatcher is connected, then a value of
    TRUE is returned. Otherwise, a value of FALSE is returned.

--*/

{

    // This code is executed phase 1 on processor 0
    //
    // Directly connect the local device interrupt dispatcher to the local
    // device interrupt vector.
    //
    // N.B. This vector is reserved for exclusive use by the HAL (see
    //      interrupt initialization).
    //

    return TRUE;
}

PHYSICAL_ADDRESS
IoMapTransfer(
    IN PADAPTER_OBJECT AdapterObject,
    IN PMDL Mdl,
    IN PVOID MapRegisterBase,
    IN PVOID CurrentVa,
    IN OUT PULONG Length,
    IN BOOLEAN WriteToDevice
    )

/*++

Routine Description:

    This routine is invoked to set up the map registers in the DMA controller
    to allow a transfer to or from a device.

Arguments:

    AdapterObject - Pointer to the adapter object representing the DMA
        controller channel that has been allocated.

    Mdl - Pointer to the MDL that describes the pages of memory that are
        being read or written.

    MapRegisterBase - The address of the base map register that has been
        allocated to the device driver for use in mapping the transfer.

    CurrentVa - Current virtual address in the buffer described by the MDL
        that the transfer is being done to or from.

    Length - Supplies the length of the transfer.  This determines the
        number of map registers that need to be written to map the transfer.
        Returns the length of the transfer which was actually mapped.

    WriteToDevice - Boolean value that indicates whether this is a write
        to the device from memory (TRUE), or vice versa.

Return Value:

    Returns the logical address to be used by bus masters.

--*/

{
    PTRANSLATION_ENTRY DmaMapRegister = MapRegisterBase;
    PULONG PageFrameNumber;
    ULONG NumberOfPages;
    ULONG Offset;
    ULONG i;
    ULONG Ponce;
    //
    // Begin by determining where in the buffer this portion of the operation
    // is taking place.
    //

    Offset = BYTE_OFFSET( (PCHAR) CurrentVa - (PCHAR) Mdl->StartVa );

    PageFrameNumber = (PULONG) (Mdl + 1);
    NumberOfPages = (Offset + *Length + PAGE_SIZE - 1) >> PAGE_SHIFT;
    PageFrameNumber += (((PCHAR) CurrentVa - (PCHAR) Mdl->StartVa) >> PAGE_SHIFT);

    // S001 vvv
    // Set the offset to point to the map register plus the offset.
    //

    Offset += ((PTRANSLATION_ENTRY) MapRegisterBase - (PTRANSLATION_ENTRY) MasterAdapterObject->MapRegisterBase) << PAGE_SHIFT;

    if ( Offset + *Length >= HalpLogicalAddressLimit ){
        UCHAR messageBuffer[256];

        HalpChangePanicFlag( 16, 0x01, 0x10);

        HalDisplayString("\nHAL I/O TLB SETUP: Logical address limit over.\n");

        sprintf( (char *)messageBuffer, "    Offst=0x%08lx, Len  =0x%08lx, Limit=0x%08lx\n", 
                Offset, *Length, HalpLogicalAddressLimit );
        HalDisplayString( (char *)messageBuffer );

        sprintf( (char *)messageBuffer, "    CurVa=0x%08lx, StrVa=0x%08lx, RegBs=0x%08lx, MsrBs=0x%08lx\n", 
                (ULONG)CurrentVa, (ULONG)Mdl->StartVa, (ULONG)MapRegisterBase, (ULONG)MasterAdapterObject->MapRegisterBase);
        HalDisplayString( (char *)messageBuffer );

        sprintf( (char *)messageBuffer, "    AdObj=0x%08lx, Mdl  =0x%08lx, Write=%d\n", 
                (ULONG)AdapterObject, (ULONG)Mdl, (ULONG)WriteToDevice );
        HalDisplayString( (char *)messageBuffer );

        KeBugCheckEx(NMI_HARDWARE_FAILURE,
                     Offset,
                     *Length,
                     HalpLogicalAddressLimit,
                     0
                    );	
    }

    //
    // Setup I/O TLB entry.
    //

    for (i = 0; i < NumberOfPages; i++) {
        (DmaMapRegister++)->PageFrame = (ULONG) (*PageFrameNumber++ << PAGE_SHIFT)
                                        | PAGE_TABLE_ENTRY_VALID;
    } // S001 ^^^
#if 0
        for(Ponce = 0;Ponce < HalpNumberOfPonce;Ponce++){
            //
            // I/O TLB Entry All Flush!!
            //
            WRITE_REGISTER_ULONG(
                                 (PULONG)&PONCE_CNTL(Ponce)->TFLSR,
                                 0x1
                                );
        }

#else
    //
    // Invalidate the translation entry.
    //
    if(NumberOfPages >= PONCE_MAX_IOTLB_ENTRY){

        for(Ponce = 0;Ponce < HalpNumberOfPonce;Ponce++){
            //
            // I/O TLB Entry All Flush!!
            //
            WRITE_REGISTER_ULONG(
                                 (PULONG)&PONCE_CNTL(Ponce)->TFLSR,
                                 0x1
                                );
        }
    } else {

        for (i = 0; i < NumberOfPages; i++) {

            //
            // I/O TLB Entry Flush!!
            //
            for(Ponce = 0;Ponce <HalpNumberOfPonce;Ponce++){
                WRITE_REGISTER_ULONG(
                                     (PULONG)&PONCE_CNTL(Ponce)->TFLSR,
                                     (Offset + i*PAGE_SIZE) & 0xFFFFF000 );
            }
        }
    }
#endif
    //
    // Are You BusMaster?. So Nothing to do anymore!!.
    //
    if ( AdapterObject == NULL) {
        return(RtlConvertUlongToLargeInteger(Offset));
    }
    // R98B
    // Start the EISA DMA controller program.
    // EISA DMA slave or ISA BusMaster or ISA Slave

    HalpEisaMapTransfer(
            AdapterObject,
            Offset,
            *Length,
            WriteToDevice
    );


    return(RtlConvertUlongToLargeInteger(Offset));
}

BOOLEAN
IoFlushAdapterBuffers(
    IN PADAPTER_OBJECT AdapterObject,
    IN PMDL Mdl,
    IN PVOID MapRegisterBase,
    IN PVOID CurrentVa,
    IN ULONG Length,
    IN BOOLEAN WriteToDevice
    )

/*++

Routine Description:

    This routine flushes the DMA adapter object buffers and clears the
    enable flag which aborts the dma.

Arguments:

    AdapterObject - Pointer to the adapter object representing the DMA
        controller channel.

    Mdl - A pointer to a Memory Descriptor List (MDL) that maps the locked-down
        buffer to/from which the I/O occured.

    MapRegisterBase - A pointer to the base of the map registers in the adapter
        or DMA controller.

    CurrentVa - The current virtual address in the buffer described the the Mdl
        where the I/O operation occurred.

    Length - Supplies the length of the transfer.

    WriteToDevice - Supplies a BOOLEAN value that indicates the direction of
        the data transfer was to the device.

Return Value:

    TRUE - If the transfer was successful.

    FALSE - If there was an error in the transfer.

--*/

{

    ULONG i;
    UCHAR DataByte;

    if (AdapterObject == NULL) {

        //
        // This is a master adadapter so there is nothing to do.
        //

        return(TRUE);
    }


   //
   // If this is a master channel, then just return since the DMA
   // request does not need to be disabled.
   //

   DataByte = AdapterObject->AdapterMode;

   if (((PDMA_EISA_MODE) &DataByte)->RequestMode == CASCADE_REQUEST_MODE) {

       return(TRUE);

   }

    //
    // Clear the EISA DMA adapter.
    //

    if (AdapterObject->AdapterNumber == 1) {

       //
       // This request is for DMA controller 1
       //

       PDMA1_CONTROL dmaControl;

       dmaControl = AdapterObject->AdapterBaseVa;

       WRITE_REGISTER_UCHAR(
           &dmaControl->SingleMask,
           (UCHAR) (DMA_SETMASK | AdapterObject->ChannelNumber)
           );

    } else {

       //
       // This request is for DMA controller 2
       //

       PDMA2_CONTROL dmaControl;

       dmaControl = AdapterObject->AdapterBaseVa;

       WRITE_REGISTER_UCHAR(
           &dmaControl->SingleMask,
           (UCHAR) (DMA_SETMASK | AdapterObject->ChannelNumber)
           );

    }

    return(TRUE);
}

IO_ALLOCATION_ACTION
HalpAllocationRoutine (
    IN PDEVICE_OBJECT DeviceObject,
    IN PIRP Irp,
    IN PVOID MapRegisterBase,
    IN PVOID Context
    )

/*++

Routine Description:

    This function is called by HalAllocateAdapterChannel when sufficent resources
    are available to the driver.  This routine saves the MapRegisterBase,
    and set the event pointed to by the context parameter.

Arguments:

    DeviceObject - Supplies a pointer where the map register base should be
        stored.

    Irp - Unused.

    MapRegisterBase - Supplied by the Io subsystem for use in IoMapTransfer.

    Context - Supplies a pointer to an event which is set to indicate the
        AdapterObject has been allocated.

Return Value:

    DeallocateObjectKeepRegisters - Indicates the adapter should be freed
        and mapregisters should remain allocated after return.

--*/

{

    UNREFERENCED_PARAMETER(Irp);

    *((PVOID *) DeviceObject) = MapRegisterBase;

    (VOID) KeSetEvent( (PKEVENT) Context, 0L, FALSE );

    return(DeallocateObjectKeepRegisters);
}


ULONG
HalReadDmaCounter(
    IN PADAPTER_OBJECT AdapterObject
    )
/*++

Routine Description:

    This function reads the DMA counter and returns the number of bytes left
    to be transfered.

Arguments:

    AdapterObject - Supplies a pointer to the adapter object to be read.

Return Value:

    Returns the number of bytes still be be transfered.

--*/

{
    ULONG count;
    ULONG high;
    KIRQL Irql;

        KeAcquireSpinLock( &AdapterObject->MasterAdapter->SpinLock, &Irql );
        //
        // Determine the controller number based on the Adapter number.
        //

        if (AdapterObject->AdapterNumber == 1) {

            //
            // This request is for DMA controller 1
            //

            PDMA1_CONTROL dmaControl;

            dmaControl = AdapterObject->AdapterBaseVa;

            //
            // Initialize count to a value which will not match.
            //

            count = 0xFFFF00;

            //
            // Loop until the same high byte is read twice.
            //

            do {

                high = count;

                WRITE_PORT_UCHAR( &dmaControl->ClearBytePointer, 0 );

                //
                // Read the current DMA count.
                //

                count = READ_PORT_UCHAR(
                    &dmaControl->DmaAddressCount[AdapterObject->ChannelNumber]
                    .DmaBaseCount
                    );

                count |= READ_PORT_UCHAR(
                    &dmaControl->DmaAddressCount[AdapterObject->ChannelNumber]
                    .DmaBaseCount
                    ) << 8;

            } while ((count & 0xFFFF00) != (high & 0xFFFF00));

        } else {

            //
            // This request is for DMA controller 2
            //

            PDMA2_CONTROL dmaControl;

            dmaControl = AdapterObject->AdapterBaseVa;

            //
            // Initialize count to a value which will not match.
            //

            count = 0xFFFF00;

            //
            // Loop until the same high byte is read twice.
            //

            do {

                high = count;

                WRITE_PORT_UCHAR( &dmaControl->ClearBytePointer, 0 );

                //
                // Read the current DMA count.
                //

                count = READ_PORT_UCHAR(
                    &dmaControl->DmaAddressCount[AdapterObject->ChannelNumber]
                    .DmaBaseCount
                    );

                count |= READ_PORT_UCHAR(
                    &dmaControl->DmaAddressCount[AdapterObject->ChannelNumber]
                    .DmaBaseCount
                    ) << 8;

            } while ((count & 0xFFFF00) != (high & 0xFFFF00));

        }
        KeReleaseSpinLock( &AdapterObject->MasterAdapter->SpinLock, Irql );

        //
        // The DMA counter has a bias of one and can only be 16 bit long.
        //

        count = (count + 1) & 0xFFFF;

    return(count);
}


VOID
HalpAllocateMapRegisters(
    IN PLOADER_PARAMETER_BLOCK LoaderBlock
    )
/*++

Routine Description:

    This routine allocates memory for map registers directly from the loader
    block information.  This memory must be non-cached and contiguous.

Arguments:

    LoaderBlock - Pointer to the loader block which contains the memory descriptors.

Return Value:

   None.

--*/
{
    PMEMORY_ALLOCATION_DESCRIPTOR Descriptor;
    PLIST_ENTRY NextMd;
    ULONG MaxPageAddress;
    ULONG PhysicalAddress;
    ULONG MapRegisterSize;

    MapRegisterSize = DMA_TRANSLATION_LIMIT;
    MapRegisterSize = BYTES_TO_PAGES(MapRegisterSize);

    //
    // The address must be in KSEG 0.
    //

    MaxPageAddress = (KSEG1_BASE >> PAGE_SHIFT) - 1 ;

    //
    // Scan the memory allocation descriptors and allocate map buffers
    //

    NextMd = LoaderBlock->MemoryDescriptorListHead.Flink;
    while (NextMd != &LoaderBlock->MemoryDescriptorListHead) {
        Descriptor = CONTAINING_RECORD(NextMd,
                                MEMORY_ALLOCATION_DESCRIPTOR,
                                ListEntry);

        //
        // Search for a block of memory which is contains a memory chuck
        // that is greater than size pages, and has a physical address less
        // than MAXIMUM_PHYSICAL_ADDRESS.
        //

        if ((Descriptor->MemoryType == LoaderFree ||
             Descriptor->MemoryType == MemoryFirmwareTemporary) &&
            (Descriptor->BasePage) &&
            (Descriptor->PageCount >= MapRegisterSize) &&
            (Descriptor->BasePage + MapRegisterSize < MaxPageAddress)) {

            PhysicalAddress = Descriptor->BasePage << PAGE_SHIFT;
                break;
        }

        NextMd = NextMd->Flink;
    }

    //
    // Use the extra descriptor to define the memory at the end of the
    // original block.
    //

    ASSERT(NextMd != &LoaderBlock->MemoryDescriptorListHead);

    if (NextMd == &LoaderBlock->MemoryDescriptorListHead)
        return;

    //
    // Adjust the memory descriptors.
    //

    Descriptor->BasePage  += MapRegisterSize;
    Descriptor->PageCount -= MapRegisterSize;

    if (Descriptor->PageCount == 0) {

        //
        // The whole block was allocated,
        // Remove the entry from the list completely.
        //

        RemoveEntryList(&Descriptor->ListEntry);
    }

    //
    // Save the map register base.
    //

    HalpMapRegisterPhysicalBase = PhysicalAddress;

    // S001 vvv
    HalpLogicalAddressLimit = (DMA_TRANSLATION_LIMIT / sizeof(TRANSLATION_ENTRY)) << PAGE_SHIFT;
#if DBG
    DbgPrint("HAL: HalpLogicalAddressLimit = 0x%x\n",HalpLogicalAddressLimit);
#endif
    // S001 ^^^
}