summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Android.mk1
-rw-r--r--bmlutils/bmlutils.c2
-rw-r--r--extra-functions.c57
-rw-r--r--extra-functions.h9
-rw-r--r--gui/action.cpp72
-rw-r--r--partition.cpp10
-rw-r--r--partitionmanager.cpp144
-rw-r--r--partitions.hpp2
-rw-r--r--prebuilt/Android.mk9
-rw-r--r--prebuilt/sdparted658
-rw-r--r--recovery.cpp1
-rw-r--r--twinstall.cpp5
12 files changed, 150 insertions, 820 deletions
diff --git a/Android.mk b/Android.mk
index bd4902d39..3734330ea 100644
--- a/Android.mk
+++ b/Android.mk
@@ -29,7 +29,6 @@ LOCAL_SRC_FILES := \
adb_install.cpp
LOCAL_SRC_FILES += \
- extra-functions.c \
data.cpp \
makelist.cpp \
partition.cpp \
diff --git a/bmlutils/bmlutils.c b/bmlutils/bmlutils.c
index 6971b7640..54b67f513 100644
--- a/bmlutils/bmlutils.c
+++ b/bmlutils/bmlutils.c
@@ -19,9 +19,7 @@
#include <signal.h>
#include <sys/wait.h>
-#include "../extra-functions.h"
-//extern int __system(const char *command);
#define BML_UNLOCK_ALL 0x8A29 ///< unlock all partition RO -> RW
#ifndef BOARD_BML_BOOT
diff --git a/extra-functions.c b/extra-functions.c
deleted file mode 100644
index 3735472a3..000000000
--- a/extra-functions.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2011 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <linux/input.h>
-
-#include "bootloader.h"
-#include "common.h"
-#include "extra-functions.h"
-#include "data.h"
-#include "variables.h"
-
-void run_script(const char *str1, const char *str2, const char *str3, const char *str4, const char *str5, const char *str6, const char *str7, int request_confirm)
-{
- ui_print("%s", str1);
- ui_print("%s", str2);
- pid_t pid = fork();
- if (pid == 0) {
- char *args[] = { "/sbin/sh", "-c", (char*)str3, "1>&2", NULL };
- execv("/sbin/sh", args);
- fprintf(stderr, str4, strerror(errno));
- _exit(-1);
- }
- int status;
- while (waitpid(pid, &status, WNOHANG) == 0) {
- ui_print(".");
- sleep(1);
- }
- ui_print("\n");
- if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) {
- ui_print("%s", str5);
- } else {
- ui_print("%s", str6);
- }
-}
-
diff --git a/extra-functions.h b/extra-functions.h
deleted file mode 100644
index 082b806b0..000000000
--- a/extra-functions.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _EXTRAFUNCTIONS_HEADER
-#define _EXTRAFUNCTIONS_HEADER
-
-#include "mincrypt/rsa.h"
-#include "minzip/Zip.h"
-
-void run_script(const char *str1, const char *str2, const char *str3, const char *str4, const char *str5, const char *str6, const char *str7, int request_confirm);
-
-#endif // _EXTRAFUNCTIONS_HEADER
diff --git a/gui/action.cpp b/gui/action.cpp
index 4c3d88ed3..afa52d1f8 100644
--- a/gui/action.cpp
+++ b/gui/action.cpp
@@ -29,7 +29,6 @@ extern "C" {
#include "../common.h"
#include "../minuitwrp/minui.h"
#include "../recovery_ui.h"
-#include "../extra-functions.h"
#include "../variables.h"
#include "../twinstall.h"
@@ -825,6 +824,7 @@ int GUIAction::doAction(Action action, int isThreaded /* = 0 */)
if (function == "partitionsd")
{
operation_start("Partition SD Card");
+ int ret_val = 0;
if (simulate) {
simulate_progress_bar();
@@ -834,75 +834,11 @@ int GUIAction::doAction(Action action, int isThreaded /* = 0 */)
if (allow_partition == 0) {
ui_print("This device does not have a real SD Card!\nAborting!\n");
} else {
- // Below seen in Koush's recovery
- char sddevice[256];
- char mkdir_path[255];
-#ifdef TW_EXTERNAL_STORAGE_PATH
- TWPartition* SDCard = PartitionManager.Find_Partition_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH));
-#else
- TWPartition* SDCard = PartitionManager.Find_Partition_By_Path("/sdcard");
-#endif
- if (SDCard == NULL) {
- LOGE("Unable to locate device to partition.\n");
- operation_end(1, simulate);
- return 0;
- }
- strcpy(sddevice, SDCard->Actual_Block_Device.c_str());
- // Just need block not whole partition
- sddevice[strlen("/dev/block/mmcblkX")] = '\0';
-
- char es[64];
- std::string ext_format, sd_path;
- int ext, swap;
- DataManager::GetValue("tw_sdext_size", ext);
- DataManager::GetValue("tw_swap_size", swap);
- DataManager::GetValue("tw_sdpart_file_system", ext_format);
- sprintf(es, "/sbin/sdparted -es %dM -ss %dM -efs ext3 -s > /cache/part.log",ext,swap);
- LOGI("\nrunning script: %s\n", es);
- run_script("\nContinue partitioning?",
- "\nPartitioning sdcard : ",
- es,
- "\nunable to execute parted!\n(%s)\n",
- "\nOops... something went wrong!\nPlease check the recovery log!\n",
- "\nPartitioning complete!\n\n",
- "\nPartitioning aborted!\n\n", 0);
-
- // recreate TWRP folder and rewrite settings - these will be gone after sdcard is partitioned
-#ifdef TW_EXTERNAL_STORAGE_PATH
- PartitionManager.Mount_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH), 1);
- DataManager::GetValue(TW_EXTERNAL_PATH, sd_path);
- memset(mkdir_path, 0, sizeof(mkdir_path));
- sprintf(mkdir_path, "%s/TWRP", sd_path.c_str());
-#else
- PartitionManager.Mount_By_Path("/sdcard", 1);
- strcpy(mkdir_path, "/sdcard/TWRP");
-#endif
- mkdir(mkdir_path, 0777);
- DataManager::Flush();
-#ifdef TW_EXTERNAL_STORAGE_PATH
- DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH));
- if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1)
- DataManager::SetValue(TW_ZIP_LOCATION_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH));
-#else
- DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, "/sdcard");
- if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1)
- DataManager::SetValue(TW_ZIP_LOCATION_VAR, "/sdcard");
-#endif
- // This is sometimes needed to make a healthy ext4 partition
- if (ext > 0 && strcmp(ext_format.c_str(), "ext4") == 0) {
- char command[256];
- LOGE("Fix this format command!\n");
- //sprintf(command, "mke2fs -t ext4 -m 0 %s", sde.blk);
- ui_print("Formatting sd-ext as ext4...\n");
- LOGI("Formatting sd-ext after partitioning, command: '%s'\n", command);
- system(command);
- ui_print("DONE\n");
- }
-
- PartitionManager.Update_System_Details();
+ if (!PartitionManager.Partition_SDCard())
+ ret_val = 1; // failed
}
}
- operation_end(0, simulate);
+ operation_end(ret_val, simulate);
return 0;
}
if (function == "installhtcdumlock")
diff --git a/partition.cpp b/partition.cpp
index 12e1f5339..633011ba6 100644
--- a/partition.cpp
+++ b/partition.cpp
@@ -624,14 +624,6 @@ bool TWPartition::Find_Partition_Size(void) {
return false;
}
-void TWPartition::Flip_Block_Device(void) {
- string temp;
-
- temp = Alternate_Block_Device;
- Primary_Block_Device = Alternate_Block_Device;
- Alternate_Block_Device = temp;
-}
-
bool TWPartition::Is_Mounted(void) {
if (!Can_Be_Mounted)
return false;
@@ -670,6 +662,7 @@ bool TWPartition::Mount(bool Display_Error) {
LOGE("Unable to mount '%s'\n", Mount_Point.c_str());
else
LOGI("Unable to mount '%s'\n", Mount_Point.c_str());
+ LOGI("Actual block device: '%s', current file system: '%s'\n", Actual_Block_Device.c_str(), Current_File_System.c_str());
return false;
} else {
if (Removable)
@@ -1349,7 +1342,6 @@ void TWPartition::Find_Actual_Block_Device(void) {
Is_Present = true;
Actual_Block_Device = Primary_Block_Device;
} else if (!Alternate_Block_Device.empty() && TWFunc::Path_Exists(Alternate_Block_Device)) {
- Flip_Block_Device();
Actual_Block_Device = Primary_Block_Device;
Is_Present = true;
} else
diff --git a/partitionmanager.cpp b/partitionmanager.cpp
index ee199eb85..98ba462c2 100644
--- a/partitionmanager.cpp
+++ b/partitionmanager.cpp
@@ -1684,3 +1684,147 @@ void TWPartitionManager::Mount_All_Storage(void) {
(*iter)->Mount(false);
}
}
+
+int TWPartitionManager::Partition_SDCard(void) {
+ char mkdir_path[255], temp[255], line[512];
+ string Command, Device, fat_str, ext_str, swap_str, start_loc, end_loc, ext_format, sd_path, tmpdevice;
+ int ext, swap, total_size = 0, fat_size;
+ FILE* fp;
+
+ ui_print("Partitioning SD Card...\n");
+#ifdef TW_EXTERNAL_STORAGE_PATH
+ TWPartition* SDCard = Find_Partition_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH));
+#else
+ TWPartition* SDCard = Find_Partition_By_Path("/sdcard");
+#endif
+ if (SDCard == NULL) {
+ LOGE("Unable to locate device to partition.\n");
+ return false;
+ }
+ if (!SDCard->UnMount(true))
+ return false;
+ TWPartition* SDext = Find_Partition_By_Path("/sd-ext");
+ if (SDext != NULL) {
+ if (!SDext->UnMount(true))
+ return false;
+ }
+ system("umount \"$SWAPPATH\"");
+ Device = SDCard->Actual_Block_Device;
+ // Just use the root block device
+ Device.resize(strlen("/dev/block/mmcblkX"));
+
+ // Find the size of the block device:
+ fp = fopen("/proc/partitions", "rt");
+ if (fp == NULL) {
+ LOGE("Unable to open /proc/partitions\n");
+ return false;
+ }
+
+ while (fgets(line, sizeof(line), fp) != NULL)
+ {
+ unsigned long major, minor, blocks;
+ char device[512];
+ char tmpString[64];
+
+ if (strlen(line) < 7 || line[0] == 'm') continue;
+ sscanf(line + 1, "%lu %lu %lu %s", &major, &minor, &blocks, device);
+
+ tmpdevice = "/dev/block/";
+ tmpdevice += device;
+ if (tmpdevice == Device) {
+ // Adjust block size to byte size
+ total_size = (int)(blocks * 1024ULL / 1000000LLU);
+ break;
+ }
+ }
+ fclose(fp);
+
+ DataManager::GetValue("tw_sdext_size", ext);
+ DataManager::GetValue("tw_swap_size", swap);
+ DataManager::GetValue("tw_sdpart_file_system", ext_format);
+ fat_size = total_size - ext - swap;
+ LOGI("sd card block device is '%s', sdcard size is: %iMB, fat size: %iMB, ext size: %iMB, ext system: '%s', swap size: %iMB\n", Device.c_str(), total_size, fat_size, ext, ext_format.c_str(), swap);
+ memset(temp, 0, sizeof(temp));
+ sprintf(temp, "%i", fat_size);
+ fat_str = temp;
+ memset(temp, 0, sizeof(temp));
+ sprintf(temp, "%i", fat_size + ext);
+ ext_str = temp;
+ memset(temp, 0, sizeof(temp));
+ sprintf(temp, "%i", fat_size + ext + swap);
+ swap_str = temp;
+ if (ext + swap > total_size) {
+ LOGE("EXT + Swap size is larger than sdcard size.\n");
+ return false;
+ }
+ ui_print("Removing partition table...\n");
+ Command = "parted -s " + Device + " mklabel msdos";
+ LOGI("Command is: '%s'\n", Command.c_str());
+ if (system(Command.c_str()) != 0) {
+ LOGE("Unable to remove partition table.\n");
+ Update_System_Details();
+ return false;
+ }
+ ui_print("Creating FAT32 partition...\n");
+ Command = "parted " + Device + " mkpartfs primary fat32 0 " + fat_str + "MB";
+ LOGI("Command is: '%s'\n", Command.c_str());
+ if (system(Command.c_str()) != 0) {
+ LOGE("Unable to create FAT32 partition.\n");
+ return false;
+ }
+ if (ext > 0) {
+ ui_print("Creating EXT partition...\n");
+ Command = "parted " + Device + " mkpartfs primary ext2 " + fat_str + "MB " + ext_str + "MB";
+ LOGI("Command is: '%s'\n", Command.c_str());
+ if (system(Command.c_str()) != 0) {
+ LOGE("Unable to create EXT partition.\n");
+ Update_System_Details();
+ return false;
+ }
+ }
+ if (swap > 0) {
+ ui_print("Creating swap partition...\n");
+ Command = "parted " + Device + " mkpartfs primary linux-swap " + ext_str + "MB " + swap_str + "MB";
+ LOGI("Command is: '%s'\n", Command.c_str());
+ if (system(Command.c_str()) != 0) {
+ LOGE("Unable to create swap partition.\n");
+ Update_System_Details();
+ return false;
+ }
+ }
+ // recreate TWRP folder and rewrite settings - these will be gone after sdcard is partitioned
+#ifdef TW_EXTERNAL_STORAGE_PATH
+ Mount_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH), 1);
+ DataManager::GetValue(TW_EXTERNAL_PATH, sd_path);
+ memset(mkdir_path, 0, sizeof(mkdir_path));
+ sprintf(mkdir_path, "%s/TWRP", sd_path.c_str());
+#else
+ Mount_By_Path("/sdcard", 1);
+ strcpy(mkdir_path, "/sdcard/TWRP");
+#endif
+ mkdir(mkdir_path, 0777);
+ DataManager::Flush();
+#ifdef TW_EXTERNAL_STORAGE_PATH
+ DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH));
+ if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1)
+ DataManager::SetValue(TW_ZIP_LOCATION_VAR, EXPAND(TW_EXTERNAL_STORAGE_PATH));
+#else
+ DataManager::SetValue(TW_ZIP_EXTERNAL_VAR, "/sdcard");
+ if (DataManager::GetIntValue(TW_USE_EXTERNAL_STORAGE) == 1)
+ DataManager::SetValue(TW_ZIP_LOCATION_VAR, "/sdcard");
+#endif
+ if (ext > 0) {
+ if (SDext == NULL) {
+ LOGE("Unable to locate sd-ext partition.\n");
+ return false;
+ }
+ Command = "mke2fs -t " + ext_format + " -m 0 " + SDext->Actual_Block_Device;
+ ui_print("Formatting sd-ext as %s...\n", ext_format.c_str());
+ LOGI("Formatting sd-ext after partitioning, command: '%s'\n", Command.c_str());
+ system(Command.c_str());
+ }
+
+ Update_System_Details();
+ ui_print("Partitioning complete.\n");
+ return true;
+} \ No newline at end of file
diff --git a/partitions.hpp b/partitions.hpp
index bb8f621eb..d55fec431 100644
--- a/partitions.hpp
+++ b/partitions.hpp
@@ -116,7 +116,6 @@ private:
void Find_Real_Block_Device(string& Block_Device, bool Display_Error); // Checks the block device given and follows symlinks until it gets to the real block device
bool Find_Partition_Size(); // Finds the partition size from /proc/partitions
unsigned long long Get_Size_Via_du(string Path, bool Display_Error); // Uses du to get sizes
- void Flip_Block_Device(); // Flips the Block_Device and Alternate_Block_Device
bool Wipe_EXT23(); // Formats as ext3 or ext2
bool Wipe_EXT4(); // Formats using ext4, uses make_ext4fs when present
bool Wipe_FAT(); // Formats as FAT except that mkdosfs from busybox usually fails so oftentimes this is actually a rm -rf wipe
@@ -182,6 +181,7 @@ public:
virtual int usb_storage_enable(void); // Enable USB storage mode
virtual int usb_storage_disable(void); // Disable USB storage mode
virtual void Mount_All_Storage(void); // Mounts all storage locations
+ virtual int Partition_SDCard(void); // Repartitions the sdcard
private:
bool Make_MD5(bool generate_md5, string Backup_Folder, string Backup_Filename); // Generates an MD5 after a backup is made
diff --git a/prebuilt/Android.mk b/prebuilt/Android.mk
index 650a6a057..4796d06ff 100644
--- a/prebuilt/Android.mk
+++ b/prebuilt/Android.mk
@@ -116,15 +116,6 @@ ifeq ($(BOARD_HAS_NO_REAL_SDCARD),)
LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/sbin
LOCAL_SRC_FILES := $(LOCAL_MODULE)
include $(BUILD_PREBUILT)
-
- #sdparted
- include $(CLEAR_VARS)
- LOCAL_MODULE := sdparted
- LOCAL_MODULE_TAGS := eng
- LOCAL_MODULE_CLASS := RECOVERY_EXECUTABLES
- LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)/sbin
- LOCAL_SRC_FILES := $(LOCAL_MODULE)
- include $(BUILD_PREBUILT)
endif
ifeq ($(TW_INCLUDE_DUMLOCK), true)
diff --git a/prebuilt/sdparted b/prebuilt/sdparted
deleted file mode 100644
index 730d5dc34..000000000
--- a/prebuilt/sdparted
+++ /dev/null
@@ -1,658 +0,0 @@
-#!/sbin/sh
-
-# do logging, if not excluded with -x
-LOGFILE="/data/sdparted.log"
-[ "$1" != "-x" ] && echo "$0" "$@" >> "$LOGFILE" && "$0" -x "$@" 2>&1 | tee -a "$LOGFILE" && exit
-shift
-
-ShowError() { echo ; echo " err: $1" ; echo ; exit 1 ; }
-
-ShowMessage() { echo ; echo " msg: $1" ; }
-
-ShowHelp() {
-
-cat <<DONEHELP
-
-$SCRIPTNAME v$SCRIPTREV created by $MYNAME
-
-if you use this script in your work, please give some credit. thanks.
-
-requirements: cm-recovery-v1.4
-
-usage: $SCRIPTNAME [options]
-
-
-options:
-
- --fatsize|-fs SIZE[MG] set the size of the fat32 partition to <SIZE>.
- default=total sdcard size - (ext + swap)
-
- --extsize|-es SIZE[MG] set the size of the ext partition to <SIZE>.
- default=$EXTSIZE
-
- --swapsize|-ss SIZE[MG] set the size of the swap partition to <SIZE>.
- if set to 0, no swap partition will be created.
- default=$SWAPSIZE
-
- --extfs|-efs TYPE set the filesystem of ext partition to <TYPE>.
- valid types=ext2, ext3, ext4
- default=$EXTFS
-
-
- --upgradefs|-ufs TYPE upgrades existing ext partition to <TYPE>.
- this operation will NOT wipe your sdcard and
- cannot be used with any partition creation options.
- valid types=ext3, ext4
-
- --downgradefs|-dfs TYPE downgrades existing ext partition to <TYPE>.
- this operation will NOT wipe your sdcard and
- cannot be used with any partition creation options.
- valid types=ext2
-
-
- --interactive|-i interactive mode
-
- --help|-h display this help
-
- --printonly|-po display sdcard information
-
- --silent|-s do not prompt user, not even initial warning.
-
-
-examples:
- $SCRIPTNAME creates swap=$SWAPSIZE ext2=$EXTSIZE fat32=remaining free space
- $SCRIPTNAME -efs ext4 creates swap=$SWAPSIZE ext4=$EXTSIZE fat32=remaining free space
- $SCRIPTNAME -fs 1.5G -efs ext3 creates swap=$SWAPSIZE ext3=$EXTSIZE fat32=1536
- $SCRIPTNAME -es 256M -ss 0 creates no swap ext2=256 fat32=remaining free space
- $SCRIPTNAME -ufs ext4 upgrades ext partition to ext4
-
-DONEHELP
-
-}
-
-UserAbort() {
-
- WHILEEXIT=
-
- while [ -z "$WHILEEXIT" ]
- do
- echo -n "do you want to continue? (Y/n) "
- read response
- echo
- [ "$response" = "Y" ] || [ "$response" = "n" ] || [ "$response" = "N" ] && WHILEEXIT="$response"
- done
-
- echo "$response" > /dev/null 2>&1 >>"$LOGFILE"
-
- [ "$response" != "Y" ]
-
-}
-
-UnmountAll () {
-
- # unmount all partitions so we can work with $SDPATH
- # i'm assuming no more than 3 partitions
- # maybe make a little more elegant later
- echo -n "unmounting all partitions..."
- umount "$FATPATH" > /dev/null 2>&1 >>"$LOGFILE"
- umount "$EXTPATH" > /dev/null 2>&1 >>"$LOGFILE"
- umount "$SWAPPATH" > /dev/null 2>&1 >>"$LOGFILE"
- echo "done"
- echo
-
-}
-
-
-CheckReqs() {
-
- echo -n "checking script requirements..."
- # check for valid sdcard
- [ -e $SDPATH ] || ShowError "$SDPATH does not exist!"
-
- # look for necessary programs
- [ -e $CMPARTED ] || ShowError "$CMPARTED does not exist!"
- [ -e $CMTUNE2FS ] || ShowError "$CMTUNE2FS does not exist!"
- [ -e $CME2FSCK ] || ShowError "$CME2FSCK does not exist!"
-
- # verify cm-v1.4
- PARTEDREV=`"$CMPARTED" "$SDPATH" version | grep Parted | cut -d" " -f3`
- [ "$PARTEDREV" == "1.8.8.1.179-aef3" ] || ShowError "you are not using parted v1.8.8.1.179-aef3!"
- echo "done"
- echo
-
-}
-
-CheckTableType() {
-
- TABLETYPE=`"$CMPARTED" "$SDPATH" print | grep Table: | cut -d" " -f3`
-
- [ "$TABLETYPE" == "loop" -o "$TABLETYPE" == "msdos" ] && TTISOK=1 || TTISOK=0
- [ "$TABLETYPE" == "loop" ] && TTISLOOP=1 || TTISLOOP=0
- [ "$TABLETYPE" == "msdos" ] && TTISMSDOS=1 || TTISMOSDOS=0
-
-}
-
-ValidateExtArg() {
-
- FUNC_RET="nonzero"
-
- # validating argument
- [ "$1" != "ext2" ] && [ "$1" != "ext3" ] && [ "$1" != "ext4" ] && FUNC_RET=
-
- [ -z "$FUNC_RET" ] && [ -z "$IMODE" ] && ShowError "$1 is not a valid filesystem."
- [ -z "$FUNC_RET" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid filesystem."
-
- # return valid argument
- [ -n "$FUNC_RET" ] && FUNC_RET="$1"
-
-}
-
-ValidateSizeArg() {
-
- # check for zero-length arg to protect expr length
- [ -z "$1" ] && ShowError "zero-length argument passed to size-validator"
-
- SIZEMB=
- ARGLEN=`expr length $1`
- SIZELEN=$(($ARGLEN-1))
- SIZEARG=`expr substr $1 1 $SIZELEN`
- SIZEUNIT=`expr substr $1 $ARGLEN 1`
-
- # check if SIZEARG is an integer
- if [ $SIZEARG -eq $SIZEARG 2> /dev/null ] ; then
- # look for G
- [ "$SIZEUNIT" == "G" ] && SIZEMB=$(($SIZEARG * 1024))
- # look for M
- [ "$SIZEUNIT" == "M" ] && SIZEMB=$SIZEARG
- # no units on arg AND prevents using bogus size units
- [ -z "$SIZEMB" ] && [ $SIZEUNIT -eq $SIZEUNIT 2> /dev/null ] && SIZEMB=$1
- # check if SIZEARG is a floating point number, GB only
- elif [ `expr index "$SIZEARG" .` != 0 ] && [ "$SIZEUNIT" == "G" ] ; then
- INT=`echo "$SIZEARG" | cut -d"." -f1`
- FRAC=`echo "$SIZEARG" | cut -d"." -f2`
- SIGDIGITS=`expr length $FRAC`
-
- [ -z "$INT" ] && INT=0
- INTMB=$(($INT * 1024))
- FRACMB=$((($FRAC * 1024) / (10**$SIGDIGITS)))
- SIZEMB=$(($INTMB + $FRACMB))
- # it's not a valid size
- else
- [ -z "$IMODE" ] && ShowError "$1 is not a valid size"
- fi
-
- [ -z "$SIZEMB" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid size"
-
- # return valid argument in MB
- FUNC_RET=$SIZEMB
-
-}
-
-CalculatePartitions() {
-
- # get size of sdcard in MB & do some math
- SDSIZEMB=`"$CMPARTED" "$SDPATH" unit MB print | grep $SDPATH | cut -d" " -f3`
- SDSIZE=${SDSIZEMB%MB}
- [ -n "$FATSIZE" ] || FATSIZE=$(($SDSIZE - $EXTSIZE - $SWAPSIZE))
- EXTEND=$(($FATSIZE + $EXTSIZE))
- SWAPEND=$(($EXTEND + $SWAPSIZE))
-
- # check for fatsize of 0
- [ $FATSIZE -le 0 ] && ShowError "must have a fat32 partition greater than 0MB"
-
- # check for zero-length sdsize...
- # indicative of parted not reporting length
- # correctly b/c of error on sdcard
- [ -z "$SDSIZE" ] && ShowError "zero-length argument passed to partition-calculator"
-
- # make sure we're not being asked to do the impossible
- [ $(($FATSIZE + $EXTSIZE + $SWAPSIZE)) -gt $SDSIZE ] && [ -z "$IMODE" ] && ShowError "sum of requested partitions is greater than sdcard size"
-
-}
-
-
-UpgradeDowngradeOnly() {
-
- if [ -n "$UEXTFSONLY" ] ; then
- echo
- [ -n "$CREATEPART" ] && ShowError "cannot use upgrade option when creating partitions, use -efs instead"
- [ -n "$DEXTFSONLY" ] && ShowError "cannot upgrade AND downgrade, it just doesn't make sense"
- echo "you have chosen to upgrade $EXTPATH to $UEXTFSONLY."
- echo "this action will NOT delete any data from sdcard."
- echo
- [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user"
- echo
- UpgradeExt "$UEXTFSONLY"
- ShowCardInfo
- elif [ -n "$DEXTFSONLY" ] ; then
- echo
- [ -n "$CREATEPART" ] && ShowError "cannot use downgrade option when creating partitions."
- [ -n "$UEXTFSONLY" ] && ShowError "cannot downgrade AND upgrade, it just doesn't make sense."
- echo "you have chosen to downgrade $EXTPATH to $DEXTFSONLY."
- echo "this action will NOT delete any data from sdcard."
- echo
- [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user"
- echo
- DowngradeExt "$DEXTFSONLY"
- ShowCardInfo
- fi
-
-}
-
-PrepareSdCard() {
-
- echo
- if [ $TTISOK -eq 0 ] ; then
- echo "partition 1 may not be aligned to cylinder boundaries."
- echo "to continue, this must be corrected."
- elif [ $TTISLOOP -gt 0 ] ; then
- echo "your sdcard's partition table type is $TABLETYPE."
- echo "to continue, partition table must be set to 'msdos'."
- elif [ $TTISMSDOS -gt 0 ] ; then
- # just a reminder..in a later version,
- # i may implement resizing of partitions,
- # so this will be unnecessary. but until then...
- echo "to continue, all existing partitions must be removed."
- else
- # this is not good, and should never happen
- # if it does, there is a serious problem
- ShowError "sdcard failed table type check."
- fi
-
- echo
- echo "this action will remove all data from your sdcard."
- echo
- [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user"
-
- [ $TTISOK -eq 0 ] && echo -n "correcting cylinder boundaries..."
- [ $TTISLOOP -gt 0 ] && echo -n "setting partition table to msdos..."
- [ $TTISMSDOS -gt 0 ] && echo -n "removing all partitions..."
-
- "$CMPARTED" -s "$SDPATH" mklabel msdos 2>&1 >>"$LOGFILE"
- echo "done"
- echo
-
-}
-
-ShowActions() {
-
- echo
- echo "total size of sdcard=$SDSIZEMB"
- echo
- echo "the following actions will be performed:"
- echo " -create $FATSIZE""MB fat32 partition"
- [ $EXTSIZE -gt 0 ] && echo " -create $EXTSIZE""MB ext2 partition"
- [ $SWAPSIZE -gt 0 ] && echo " -create $SWAPSIZE""MB swap partition"
- [ "$EXTFS" != "ext2" ] && echo " -ext2 partition will be upgraded to $EXTFS"
- echo
- [ -z "$SILENTRUN" ] && UserAbort && ShowError "script canceled by user"
- echo
-
-}
-
-ShowCardInfo() {
-
- echo "sddevice located in /sdcard/sddev.log"
- echo $SDPATH > /sdcard/sddev.log
-
- CheckTableType
-
- echo
- echo "retrieving current sdcard information..."
-
- if [ $TTISOK -gt 0 ] ; then
- echo
- parted "$SDPATH" print
- echo
- echo "script log is located @ /data/sdparted.log"
- exit 0
- else
- echo
- echo "partition 1 may not be aligned to cylinder boundaries."
- ShowError "cannot complete print operation."
- fi
- echo
-
-}
-
-
-PartitionSdCard() {
-
- echo "performing selected actions..."
- echo
-
- if [ $FATSIZE -gt 0 ] ; then
- echo -n "creating fat32 partition..."
- "$CMPARTED" -s "$SDPATH" mkpartfs primary fat32 0 "$FATSIZE"MB 2>&1 >>"$LOGFILE"
- echo "done"
- fi
-
- if [ $EXTSIZE -gt 0 ] ; then
- echo -n "creating ext2 partition..."
- "$CMPARTED" -s "$SDPATH" mkpartfs primary ext2 "$FATSIZE"MB "$EXTEND"MB 2>&1 >>"$LOGFILE"
- "$CMTUNE2FS" -L sd-ext "$EXTPATH" 2>&1 >>"$LOGFILE"
- echo "done"
- fi
-
- if [ $SWAPSIZE -gt 0 ] ; then
- echo -n "creating swap partition..."
- "$CMPARTED" -s "$SDPATH" mkpartfs primary linux-swap "$EXTEND"MB "$SWAPEND"MB 2>&1 >>"$LOGFILE"
- echo "done"
- fi
- echo
-
-}
-
-UpgradeExt() {
-
- # check for no upgrade
- [ "$1" == "ext2" ] && return
- # check for ext partition
- [ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist"
-
- # have to use -m switch for this check b/c parted incorrectly
- # reports all ext partitions as ext2 when running print <number>
- CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5`
- [ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1"
-
- # grabbed the code bits for ext3 from upgrade_fs(credit:cyanogen)
- # check for ext2...must upgrade to ext3 first b4 ext4
- if [ "$1" == "ext3" -o "$1" == "ext4" ] ; then
- echo -n "adding journaling to $EXTPATH..."
- umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
- "$CME2FSCK" -p "$EXTPATH" 2>&1 >>"$LOGFILE"
- "$CMTUNE2FS" -c0 -i0 -j "$EXTPATH" 2>&1 >>"$LOGFILE"
- echo "done"
- fi
-
- # and got convert to ext4 from xda-forum(credit:Denkai)
- if [ "$1" == "ext4" ] ; then
- echo -n "converting $EXTPATH to ext4 filesystem..."
- umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
- "$CMTUNE2FS" -O extents,uninit_bg,dir_index "$EXTPATH" 2>&1 >>"$LOGFILE"
- "$CME2FSCK" -fpDC0 "$EXTPATH" 2>&1 >>"$LOGFILE"
- echo "done"
- fi
- echo
-
-}
-
-DowngradeExt() {
-
- # check for ext partition
- [ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist"
-
- # have to use print for this check b/c parted incorrectly
- # reports all ext partitions as ext2 when running print <number>
- CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5`
- [ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1"
-
- if [ "$CHECKEXTFS" == "ext4" -o "$1" == "ext3" ] ; then
- # interweb says downgrading from ext4 is not possible
- # without a backup/restore procedure.
- # if i figure it out, i'll implement it.
- ShowError "downgrading from ext4 is not currently supported"
- fi
-
- if [ "$1" == "ext2" ] ; then
- echo -n "removing journaling from $EXTPATH..."
- umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
- "$CMTUNE2FS" -O ^has_journal "$EXTPATH" 2>&1 >>"$LOGFILE"
- "$CME2FSCK" -fp "$EXTPATH" 2>&1 >>"$LOGFILE"
- echo "done"
- fi
- echo
-
-}
-
-
-Interactive() {
-
-cat <<DONEINSTRUCT
-
-sdparted interactive mode
-
-rules:
-1. no answer means you accept default value
-2. enter '0' for no partition
-
-DONEINSTRUCT
-
- UserAbort && ShowError "script canceled by user"
-
- CalculatePartitions
-
- GetSwapSize
-
- FATSIZE=
-
- CalculatePartitions
-
- GetExtSize
-
- GetExtType
-
- FATSIZE=
-
- CalculatePartitions
-
- GetFatSize
-
-}
-
-GetSwapSize() {
-
- SWAPTEST=
-
- while [ -z "$SWAPTEST" ]
- do
- echo
- echo -n "swap partition size [default=$SWAPSIZE]: "
- read SWAPRESP
-
- [ -z "$SWAPRESP" ] && SWAPRESP="$SWAPSIZE"
- echo "$SWAPRESP" > /dev/null 2>&1 >>"$LOGFILE"
-
- ValidateSizeArg "$SWAPRESP"
- SWAPTEST="$FUNC_RET"
- [ -n "$SWAPTEST" ] && [ $SWAPTEST -gt $SDSIZE ] && ShowMessage "$SWAPRESP > available space($(($SDSIZE))M)." && SWAPTEST=
- done
-
- SWAPSIZE=$SWAPTEST
-
-}
-
-GetExtSize() {
-
- EXTTEST=
-
- while [ -z "$EXTTEST" ]
- do
- echo
- echo -n "ext partition size [default=$EXTSIZE]: "
- read EXTRESP
-
- [ -z "$EXTRESP" ] && EXTRESP="$EXTSIZE"
- echo "$EXTRESP" > /dev/null 2>&1 >>"$LOGFILE"
-
- ValidateSizeArg "$EXTRESP"
- EXTTEST="$FUNC_RET"
-
- [ -n "$EXTTEST" ] && [ $EXTTEST -gt $(($SDSIZE - $SWAPSIZE)) ] && ShowMessage "$EXTRESP > available space($(($SDSIZE - $SWAPSIZE))M)." && EXTTEST=
- done
-
- EXTSIZE=$EXTTEST
-
-}
-
-GetExtType() {
-
- FSTEST=
-
- while [ -z "$FSTEST" ]
- do
- echo
- echo -n "ext partition type [default=$EXTFS]: "
- read FSRESP
-
- [ -z "$FSRESP" ] && FSRESP="$EXTFS"
- echo "$FSRESP" > /dev/null 2>&1 >>"$LOGFILE"
-
- ValidateExtArg "$FSRESP"
- FSTEST="$FUNC_RET"
- done
-
- EXTFS="$FSTEST"
-
-}
-
-GetFatSize() {
-
- FATTEST=
-
- while [ -z "$FATTEST" ]
- do
- echo
- echo -n "fat partition size [default=$FATSIZE]: "
- read FATRESP
-
- [ -z "$FATRESP" ] && FATRESP="$FATSIZE"
- echo "$FATRESP" > /dev/null 2>&1 >>"$LOGFILE"
-
- ValidateSizeArg "$FATRESP"
- FATTEST="$FUNC_RET"
-
- [ -n "$FATTEST" ] && [ $FATTEST -gt $FATSIZE ] && ShowMessage "$FATRESP > available space($(($SDSIZE - $SWAPSIZE - $EXTSIZE))M)." && FATTEST=
- [ -n "$FATTEST" ] && [ $FATTEST -le 0 ] && ShowMessage "must have a fat32 partition greater than 0MB" && FATTEST=
- done
-
- FATSIZE=$FATTEST
-
-}
-
-
-SCRIPTNAME="sdparted"
-SCRIPTREV="0.6"
-MYNAME="51dusty"
-
-IMODE=
-SILENTRUN=
-CREATEPART=
-FUNC_RET=
-
-UEXTFSONLY=
-DEXTFSONLY=
-
-TTISOK=
-TTISLOOP=
-TTISMSDOS=
-
-SDSIZE=
-SDSIZEMB=
-SDINFO=$(cat /etc/fstab | grep /sdcard | awk '{print $1}')
-if [ -L "$SDINFO" ]
-then
- SDPATH=$(ls -l $SDINFO | awk '{print $11}')
-else
- SDPATH=$SDINFO
-fi
-# we may now have an SDPATH, let's make sure its on mmcblkX or mmcblkXp1
-CHECK_SDPATH1=$(echo $SDPATH | grep mmcblk.$)
-CHECK_SDPATH2=$(echo $SDPATH | grep mmcblk.p1$)
-if [ -z "$CHECK_SDPATH1" ]
-then
- if [ -z "$CHECK_SDPATH2" ]
- then
- echo fail1
- unset SDPATH
- else
- LEN=${#SDPATH}
- BLKLEN=$(expr $LEN - 2)
- SDPATH=${SDPATH:0:$BLKLEN}
- fi
-fi
-
-
-FATSIZE=
-FATTYPE="fat32"
-FATPATH=$SDPATH"p1"
-
-EXTSIZE=512
-EXTFS="ext2"
-EXTPATH=$SDPATH"p2"
-EXTEND=
-
-SWAPSIZE=32
-SWAPTYPE="linux-swap"
-SWAPPATH=$SDPATH"p3"
-SWAPEND=
-
-CMPARTED="/sbin/parted"
-CMTUNE2FS="/sbin/tune2fs"
-CME2FSCK="/sbin/e2fsck"
-
-# give the output some breathing room
-echo "$SCRIPTREV" >> "$LOGFILE"
-echo
-
-# check for arguments
-while [ $# -gt 0 ] ; do
- case "$1" in
-
- -h|--help) ShowHelp ; exit 0 ;;
-
- -fs|--fatsize) shift ; ValidateSizeArg "$1" ; FATSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
- -es|--extsize) shift ; ValidateSizeArg "$1" ; EXTSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
- -ss|--swapsize) shift ; ValidateSizeArg "$1" ; SWAPSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
- -efs|--extfs) shift ; ValidateExtArg "$1" ; EXTFS="$FUNC_RET" ; CREATEPART="$1" ;;
-
- -ufs|--upgradefs) shift ; ValidateExtArg "$1" ; UEXTFSONLY="$FUNC_RET" ;;
- -dfs|--downgradefs) shift ; ValidateExtArg "$1" ; DEXTFSONLY="$FUNC_RET" ;;
-
- -i|--interactive) IMODE="$1" ;;
-
- -s|--silent) SILENTRUN="$1" ;;
-
- -po|--printonly) ShowCardInfo ;;
-
- *) ShowHelp ; ShowError "unknown argument '$1'" ;;
-
- esac
- shift
-done
-
-# can't do silent when in interactive mode
-[ -n "$IMODE" ] && SILENTRUN=
-
-# make sure sdcard exists and all needed files are here
-CheckReqs
-
-# unmount all
-UnmountAll
-
-# upgrade only? downgrade only?
-UpgradeDowngradeOnly
-
-# check table
-CheckTableType
-
-# prep card
-PrepareSdCard
-
-# check for interactive mode
-[ -n "$IMODE" ] && Interactive
-
-# do some math
-CalculatePartitions
-
-# last chance to cancel
-ShowActions
-
-# partition card
-PartitionSdCard
-
-# upgrade fs if necessary
-UpgradeExt "$EXTFS"
-
-# say goodbye and show print output
-ShowCardInfo
diff --git a/recovery.cpp b/recovery.cpp
index 35e61162e..1e1d9a952 100644
--- a/recovery.cpp
+++ b/recovery.cpp
@@ -50,7 +50,6 @@ extern "C" {
}
extern "C" {
-#include "extra-functions.h"
#include "data.h"
#include "gui/gui.h"
}
diff --git a/twinstall.cpp b/twinstall.cpp
index 4bc69424e..86a0979a3 100644
--- a/twinstall.cpp
+++ b/twinstall.cpp
@@ -41,11 +41,6 @@
#include "partitions.hpp"
#include "twrp-functions.hpp"
-extern "C" {
-#include "extra-functions.h"
-int __system(const char *command);
-};
-
extern RecoveryUI* ui;
#define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary"