path: root/source/Generating/DistortedHeightmap.cpp

// DistortedHeightmap.cpp

// Implements the cDistortedHeightmap class representing the height and composition generator capable of overhangs

#include "Globals.h"

#include "DistortedHeightmap.h"
#include "../OSSupport/File.h"
#include "../../iniFile/iniFile.h"
#include "../LinearUpscale.h"





/** This table assigns a relative maximum overhang size in each direction to biomes.
Both numbers indicate a number which will multiply the noise value for each coord;
this means that you can have different-sized overhangs in each direction.
Usually you'd want to keep both numbers the same.
The numbers are "relative", not absolute maximum; overhangs of a slightly larger size are possible
due to the way that noise is calculated.
*/
const cDistortedHeightmap::sGenParam cDistortedHeightmap::m_GenParam[biNumBiomes] =
{
	/* Biome              |   AmpX | AmpZ */
	/* biOcean            */ { 1.5f,  1.5f},
	/* biPlains           */ { 0.5f,  0.5f},
	/* biDesert           */ { 0.5f,  0.5f},
	/* biExtremeHills     */ {16.0f, 16.0f},
	/* biForest           */ { 3.0f,  3.0f},
	/* biTaiga            */ { 1.5f,  1.5f},
	
	/* biSwampland        */ { 0.0f,  0.0f},
	/* biRiver            */ { 0.0f,  0.0f},
	/* biNether           */ { 0.0f,  0.0f},  // Unused, but must be here due to indexing
	/* biSky              */ { 0.0f,  0.0f},  // Unused, but must be here due to indexing
	/* biFrozenOcean      */ { 0.0f,  0.0f},
	/* biFrozenRiver      */ { 0.0f,  0.0f},
	/* biIcePlains        */ { 0.0f,  0.0f},
	/* biIceMountains     */ { 8.0f,  8.0f},
	/* biMushroomIsland   */ { 4.0f,  4.0f},
	/* biMushroomShore    */ { 0.0f,  0.0f},
	/* biBeach            */ { 0.0f,  0.0f},
	/* biDesertHills      */ { 5.0f,  5.0f},
	/* biForestHills      */ { 6.0f,  6.0f},
	/* biTaigaHills       */ { 8.0f,  8.0f},
	/* biExtremeHillsEdge */ { 7.0f,  7.0f},
	/* biJungle           */ { 0.0f,  0.0f},
	/* biJungleHills      */ { 8.0f,  8.0f},
} ;





cDistortedHeightmap::cDistortedHeightmap(int a_Seed, cBiomeGen & a_BiomeGen) :
	m_Noise1(a_Seed + 1000),
	m_Noise2(a_Seed + 2000),
	m_Noise3(a_Seed + 3000),
	m_Noise4(a_Seed + 4000),
	m_Noise5(a_Seed + 5000),
	m_BiomeGen(a_BiomeGen),
	m_UnderlyingHeiGen(a_Seed, a_BiomeGen),
	m_HeightGen(&m_UnderlyingHeiGen, 64)
{
}





void cDistortedHeightmap::Initialize(cIniFile & a_IniFile)
{
	// Read the params from the INI file:
	m_SeaLevel   =                 a_IniFile.GetValueSetI("Generator", "DistortedHeightmapSeaLevel",   62);
	m_FrequencyX = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "DistortedHeightmapFrequencyX", 10);
	m_FrequencyY = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "DistortedHeightmapFrequencyY", 10);
	m_FrequencyZ = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "DistortedHeightmapFrequencyZ", 10);
}





void cDistortedHeightmap::PrepareState(int a_ChunkX, int a_ChunkZ)
{
	if ((m_CurChunkX == a_ChunkX) && (m_CurChunkZ == a_ChunkZ))
	{
		return;
	}
	m_CurChunkX = a_ChunkX;
	m_CurChunkZ = a_ChunkZ;
	
	
	m_HeightGen.GenHeightMap(a_ChunkX, a_ChunkZ, m_CurChunkHeights);
	UpdateDistortAmps();
	GenerateHeightArray();
}





void cDistortedHeightmap::GenerateHeightArray(void)
{
	// Parameters:
	static const int INTERPOL_X = 8;
	static const int INTERPOL_Y = 4;
	static const int INTERPOL_Z = 8;
	static const int DIM_X = 1 +  (17 / INTERPOL_X);
	static const int DIM_Y = 1 + (257 / INTERPOL_Y);
	static const int DIM_Z = 1 +  (17 / INTERPOL_Z);
	NOISE_DATATYPE DistortNoiseX[DIM_X * DIM_Z * DIM_Y];
	NOISE_DATATYPE DistortNoiseZ[DIM_X * DIM_Z * DIM_Y];

	// TODO: This triple-loop should really be moved into the cPerlinNoise class for optimization
	int idx = 0;
	for (int y = 0; y < DIM_Y; y++)
	{
		NOISE_DATATYPE NoiseY = ((NOISE_DATATYPE)(y * INTERPOL_X)) / m_FrequencyY;
		for (int z = 0; z < DIM_Z; z++)
		{
			NOISE_DATATYPE NoiseZ = ((NOISE_DATATYPE)(m_CurChunkZ * cChunkDef::Width + z * INTERPOL_Z)) / m_FrequencyZ;
			for (int x = 0; x < DIM_X; x++)
			{
				NOISE_DATATYPE NoiseX = ((NOISE_DATATYPE)(m_CurChunkX * cChunkDef::Width + x * INTERPOL_X)) / m_FrequencyX;
				DistortNoiseX[idx] =
					m_Noise1.CubicNoise3D(NoiseX, NoiseY, NoiseZ) * (NOISE_DATATYPE)0.5 +
					m_Noise2.CubicNoise3D(NoiseX / 2, NoiseY / 2, NoiseZ / 2) +
					m_Noise3.CubicNoise3D(NoiseX / 4, NoiseY / 4, NoiseZ / 4) * 2;
					
				DistortNoiseZ[idx] =
					m_Noise3.CubicNoise3D(NoiseX, NoiseY, NoiseZ) * (NOISE_DATATYPE)0.5 +
					m_Noise2.CubicNoise3D(NoiseX / 2, NoiseY / 2, NoiseZ / 2) +
					m_Noise1.CubicNoise3D(NoiseX / 4, NoiseY / 4, NoiseZ / 4) * 2;
				idx += 1;
			}  // for x
		}  // for z
	}  // for y
	
	// Convert from distortion into real height values:
	for (int y = 0; y < DIM_Y; y++)
	{
		NOISE_DATATYPE * CurFloor = m_DistortedHeightmap + 17 * 17 * y * INTERPOL_Y;
		for (int z = 0; z < DIM_Z; z++)
		{
			int idx = 17 * z * INTERPOL_Z;
			int AmpIdx = 17 * z * INTERPOL_Z;
			int NoiseArrayIdx = z * DIM_X + y * DIM_X * DIM_Z;
			for (int x = 0; x < DIM_X; x++)
			{
				NOISE_DATATYPE DistX = DistortNoiseX[NoiseArrayIdx + x] * m_DistortAmpX[AmpIdx + x * INTERPOL_X];
				NOISE_DATATYPE DistZ = DistortNoiseZ[NoiseArrayIdx + x] * m_DistortAmpZ[AmpIdx + x * INTERPOL_X];
				DistX += (NOISE_DATATYPE)(m_CurChunkX * cChunkDef::Width + x * INTERPOL_X);
				DistZ += (NOISE_DATATYPE)(m_CurChunkZ * cChunkDef::Width + z * INTERPOL_Z);
				// Adding 0.5 helps alleviate the interpolation artifacts
				CurFloor[idx + x * INTERPOL_X] = (NOISE_DATATYPE)GetHeightmapAt(DistX, DistZ) + (NOISE_DATATYPE)0.5;
			}  // for x
		}  // for z
		LinearUpscale2DArrayInPlace(CurFloor, 17, 17, INTERPOL_X, INTERPOL_Z);
	}  // for y
	
	// Finish the 3D linear interpolation by interpolating between each XZ-floors on the Y axis
	for (int y = 1; y < cChunkDef::Height; y++)
	{
		if ((y % INTERPOL_Y) == 0)
		{
			// This is the interpolation source floor, already calculated
			continue;
		}
		int LoFloorY = (y / INTERPOL_Y) * INTERPOL_Y;
		int HiFloorY = LoFloorY + INTERPOL_Y;
		NOISE_DATATYPE * LoFloor  = &(m_DistortedHeightmap[LoFloorY * 17 * 17]);
		NOISE_DATATYPE * HiFloor  = &(m_DistortedHeightmap[HiFloorY * 17 * 17]);
		NOISE_DATATYPE * CurFloor = &(m_DistortedHeightmap[y * 17 * 17]);
		NOISE_DATATYPE Ratio = ((NOISE_DATATYPE)(y % INTERPOL_Y)) / INTERPOL_Y;
		int idx = 0;
		for (int z = 0; z < cChunkDef::Width; z++)
		{
			for (int x = 0; x < cChunkDef::Width; x++)
			{
				CurFloor[idx] = LoFloor[idx] + (HiFloor[idx] - LoFloor[idx]) * Ratio;
				idx += 1;
			}
			idx += 1;  // Skipping one X column
		}  // for z
	}  // for y
	
	/*
	// DEBUG: Dump the distorted heightmap to a file for visual inspection
	cFile f;
	if (f.Open(Printf("DistortedHeightmap_%d_%d.grab", m_CurChunkX, m_CurChunkZ), cFile::fmWrite))
	{
		for (int z = 0; z < cChunkDef::Width; z++)
		{
			for (int y = cChunkDef::Height - 1; y >= 0; y--)
			{
				unsigned char Line[cChunkDef::Width];
				int idx = z * 17 + y * 17 * 17;
				for (int x = 0; x < cChunkDef::Width; x++)
				{
					Line[x] = (unsigned char)m_DistortedHeightmap[idx + x];
				}
				f.Write(Line, sizeof(Line));
			}  // for y
			unsigned char Interrupt[2 * cChunkDef::Width];
			memset(Interrupt, 0, cChunkDef::Width);
			memset(Interrupt + cChunkDef::Width, 0xff, cChunkDef::Width);
			f.Write(Interrupt, sizeof(Interrupt));
		}
	}
	//*/
}





void cDistortedHeightmap::GenHeightMap(int a_ChunkX, int a_ChunkZ, cChunkDef::HeightMap & a_HeightMap)
{
	PrepareState(a_ChunkX, a_ChunkZ);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int NoiseArrayIdx = x + 17 * z;
			cChunkDef::SetHeight(a_HeightMap, x, z, m_SeaLevel - 1);
			for (int y = cChunkDef::Height - 1; y > m_SeaLevel - 1; y--)
			{
				int HeightMapHeight = (int)m_DistortedHeightmap[NoiseArrayIdx + 17 * 17 * y];
				if (y < HeightMapHeight)
				{
					cChunkDef::SetHeight(a_HeightMap, x, z, y);
					break;
				}
			}  // for y
		}  // for x
	}  // for z
}





void cDistortedHeightmap::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	PrepareState(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ());
	a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int NoiseArrayIdx = x + 17 * z;
			int LastAir = a_ChunkDesc.GetHeight(x, z) + 1;
			bool HasHadWater = false;
			for (int y = LastAir - 1; y > 0; y--)
			{
				int HeightMapHeight = (int)m_DistortedHeightmap[NoiseArrayIdx + 17 * 17 * y];

				if (y >= HeightMapHeight)
				{
					// "air" part
					LastAir = y;
					if (y < m_SeaLevel)
					{
						a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER);
						HasHadWater = true;
					}
					continue;
				}
				// "ground" part:
				if (y < LastAir - 4)
				{
					a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STONE);
					continue;
				}
				if (HasHadWater)
				{
					// TODO: Decide between sand and dirt
					a_ChunkDesc.SetBlockType(x, y, z, (y < LastAir - 3) ? E_BLOCK_SANDSTONE : E_BLOCK_SAND);
				}
				else
				{
					switch (a_ChunkDesc.GetBiome(x, z))
					{
						case biOcean:
						case biPlains:
						case biExtremeHills:
						case biForest:
						case biTaiga:
						case biSwampland:
						case biRiver:
						case biFrozenOcean:
						case biFrozenRiver:
						case biIcePlains:
						case biIceMountains:
						case biForestHills:
						case biTaigaHills:
						case biExtremeHillsEdge:
						case biJungle:
						case biJungleHills:
						{
							a_ChunkDesc.SetBlockType(x, y, z, (y == LastAir - 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT);
							break;
						}
						case biDesertHills:
						case biDesert:
						case biBeach:
						{
							a_ChunkDesc.SetBlockType(x, y, z, (y < LastAir - 3) ? E_BLOCK_SANDSTONE : E_BLOCK_SAND);
							break;
						}
						case biMushroomIsland:
						case biMushroomShore:
						{
							a_ChunkDesc.SetBlockType(x, y, z, (y == LastAir - 1) ? E_BLOCK_MYCELIUM : E_BLOCK_DIRT);
							break;
						}
					}
				}
			}  // for y
			a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
		}  // for x
	}  // for z
}





int cDistortedHeightmap::GetHeightmapAt(NOISE_DATATYPE a_X, NOISE_DATATYPE a_Z)
{
	int ChunkX = (int)floor(a_X / (NOISE_DATATYPE)16);
	int ChunkZ = (int)floor(a_Z / (NOISE_DATATYPE)16);
	int RelX = (int)(a_X - (NOISE_DATATYPE)ChunkX * cChunkDef::Width);
	int RelZ = (int)(a_Z - (NOISE_DATATYPE)ChunkZ * cChunkDef::Width);

	// If we're withing the same chunk, return the pre-cached heightmap:
	if ((ChunkX == m_CurChunkX) && (ChunkZ == m_CurChunkZ))
	{
		return cChunkDef::GetHeight(m_CurChunkHeights, RelX, RelZ);
	}
	
	// Ask the cache:
	HEIGHTTYPE res = 0;
	if (m_HeightGen.GetHeightAt(ChunkX, ChunkZ, RelX, RelZ, res))
	{
		// The height was in the cache
		return res;
	}
	
	// The height is not in the cache, generate full heightmap and get it there:
	cChunkDef::HeightMap Heightmap;
	m_HeightGen.GenHeightMap(ChunkX, ChunkZ, Heightmap);
	return cChunkDef::GetHeight(Heightmap, RelX, RelZ);
}





void cDistortedHeightmap::UpdateDistortAmps(void)
{
	BiomeNeighbors Biomes;
	for (int z = -1; z <= 1; z++)
	{
		for (int x = -1; x <= 1; x++)
		{
			m_BiomeGen.GenBiomes(m_CurChunkX + x, m_CurChunkZ + z, Biomes[x + 1][z + 1]);
		}  // for x
	}  // for z

	// Linearly interpolate 4x4 blocks of Amps:
	const int STEPZ = 4;  // Must be a divisor of 16
	const int STEPX = 4;  // Must be a divisor of 16
	for (int z = 0; z < 17; z += STEPZ)
	{
		for (int x = 0; x < 17; x += STEPX)
		{
			GetDistortAmpsAt(Biomes, x, z, m_DistortAmpX[x + 17 * z], m_DistortAmpZ[x + 17 * z]);
		}
	}
	LinearUpscale2DArrayInPlace(m_DistortAmpX, 17, 17, STEPX, STEPZ);
	LinearUpscale2DArrayInPlace(m_DistortAmpZ, 17, 17, STEPX, STEPZ);
}	





void cDistortedHeightmap::GetDistortAmpsAt(BiomeNeighbors & a_Neighbors, int a_RelX, int a_RelZ, NOISE_DATATYPE & a_DistortAmpX, NOISE_DATATYPE & a_DistortAmpZ)
{
	// Sum up how many biomes of each type there are in the neighborhood:
	int BiomeCounts[biNumBiomes];
	memset(BiomeCounts, 0, sizeof(BiomeCounts));
	int Sum = 0;
	for (int z = -8; z <= 8; z++)
	{
		int FinalZ = a_RelZ + z + cChunkDef::Width;
		int IdxZ = FinalZ / cChunkDef::Width;
		int ModZ = FinalZ % cChunkDef::Width;
		int WeightZ = 9 - abs(z);
		for (int x = -8; x <= 8; x++)
		{
			int FinalX = a_RelX + x + cChunkDef::Width;
			int IdxX = FinalX / cChunkDef::Width;
			int ModX = FinalX % cChunkDef::Width;
			EMCSBiome Biome = cChunkDef::GetBiome(a_Neighbors[IdxX][IdxZ], ModX, ModZ);
			if ((Biome < 0) || (Biome >= ARRAYCOUNT(BiomeCounts)))
			{
				continue;
			}
			int WeightX = 9 - abs(x);
			BiomeCounts[Biome] += WeightX + WeightZ;
			Sum += WeightX + WeightZ;
		}  // for x
	}  // for z

	if (Sum <= 0)
	{
		// No known biome around? Weird. Return a bogus value:
		ASSERT(!"cHeiGenBiomal: Biome sum failed, no known biome around");
		a_DistortAmpX = 16;
		a_DistortAmpZ = 16;
	}

	// For each biome type that has a nonzero count, calc its amps and add it:
	NOISE_DATATYPE AmpX = 0;
	NOISE_DATATYPE AmpZ = 0;
	for (int i = 0; i < ARRAYCOUNT(BiomeCounts); i++)
	{
		AmpX += BiomeCounts[i] * m_GenParam[i].m_DistortAmpX;
		AmpZ += BiomeCounts[i] * m_GenParam[i].m_DistortAmpZ;
	}
	a_DistortAmpX = AmpX / Sum;
	a_DistortAmpZ = AmpZ / Sum;
}