1 files changed, 5 insertions, 5 deletions

diff --git a/07.-KrakenSDR-Troubleshooting.md b/07.-KrakenSDR-Troubleshooting.md
index 3d1ba25..ad3e9b9 100644
--- a/07.-KrakenSDR-Troubleshooting.md
+++ b/07.-KrakenSDR-Troubleshooting.md
@@ -17,16 +17,16 @@ The second most likely cause is booting the Pi or running the software without t
 
 The third most likely cause is a poor quality USB data cable.
 
+#### The Android App shows no bearings
+Make sure that you have entered the correct IP address of the device the Kraken is running on in the app settings. Note that if you are creating a mobile hotspot from your phone, entering hostnames like `krakensdr` will not work since mobile providers block hostnames. You must enter the actual IP address.
+
+Secondly, ensure that you have actually started the DOA logging in the app by pressing the start DOA button, which looks like a thin diagonal arrow. It is the button second from the bottom on the bottom right. Do not get confused with the fat north pointing arrow button above it, which is for activating turn by turn directions.
+
 #### I edited the number of channels in the heimdall config file, but now heimdall doesn't work
 Currently if you edit the num_ch you will also need to edit the en_bias_tee string to a matching length. For example
 > num_ch = 2
 > en_bias_tee = 0,0
 
-#### The Android App shows no bearings
-Make sure that you have entered the correct IP address of the device the Kraken is running on in the app settings.
-
-Secondly, ensure that you have actually started the DOA logging in the app by pressing the start DOA button, which looks like a thin diagonal arrow. It is the button second from the bottom on the bottom right. Do not get confused with the fat north pointing arrow button above it, which is for activating turn by turn directions.
-
 ## General Troubleshooting Tips
 
 ### Check Channel Power Levels