summaryrefslogtreecommitdiffstats
path: root/sw
diff options
context:
space:
mode:
authorAnton Luka Šijanec <anton@sijanec.eu>2022-10-31 17:59:40 +0100
committerAnton Luka Šijanec <anton@sijanec.eu>2022-10-31 17:59:40 +0100
commit9c7f43f3e60950e2268e19753a6bc39aeb00b879 (patch)
tree2e02925dc43d1fc58a38ec0fb6d9b97c41e1be3f /sw
parentupdate keyboard.txt (diff)
downloadluč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar.gz
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar.bz2
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar.lz
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar.xz
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.tar.zst
luč-9c7f43f3e60950e2268e19753a6bc39aeb00b879.zip
Diffstat (limited to 'sw')
-rw-r--r--sw/dmx2artnet/README.txt19
-rw-r--r--sw/dmx2artnet/src/main.cpp85
2 files changed, 87 insertions, 17 deletions
diff --git a/sw/dmx2artnet/README.txt b/sw/dmx2artnet/README.txt
new file mode 100644
index 0000000..5aebdef
--- /dev/null
+++ b/sw/dmx2artnet/README.txt
@@ -0,0 +1,19 @@
+nodemcu: connect D4 to TX
+ D7 to RXD (the pin that transmits, weird, right?) of UART-RS485
+ G to GND of UART-RS485
+ 3V to VCC of UART-RS485
+plug in nodemcu to computer via usb
+pio run --target upload
+
+SLIP:
+slattach -vdp slip -s 115200 /dev/ttyUSB0
+ifconfig sl0 up
+ip addr add dev sl0 2.0.0.1/8
+use artnet on 2.0.0.1 as input in qlc+, set in artnet config universe to 0, instead of default 1
+
+WIFI:
+add #define DO_WIFI to source and change ssid to connect to in setup()
+use artnet on wifi iface as input in qlc+, set in artnet config universe to 0, instead of default 1
+
+hacks:
+connect D6 to GND to enable flash suppression hack - flash (dmx 255) will be replaced with the last known value instead
diff --git a/sw/dmx2artnet/src/main.cpp b/sw/dmx2artnet/src/main.cpp
index 2da28ae..21ddd18 100644
--- a/sw/dmx2artnet/src/main.cpp
+++ b/sw/dmx2artnet/src/main.cpp
@@ -1,12 +1,16 @@
+#define DO_SLIP 1
+#define DO_WIFI 1
#include <Arduino.h>
#include <WiFiUdp.h>
+#ifdef DO_WIFI
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
+WiFiUDP u;
+#endif
#define END 0xc0
#define ESC 0xdb
#define ESC_END 0xdc
#define ESC_ESC 0xdd
-WiFiUDP u;
struct artnet {
char name[8]; // Art-Net\0
char opcode[2]; // 0x5000 in LE: { 0x00, 0x50 }
@@ -63,18 +67,47 @@ struct artnet_over_slip {
struct artnet artnet;
} __attribute__((packed));
struct artnet_over_slip p;
-unsigned w = 0;
unsigned long č = 0;
-unsigned char t;
+
+volatile unsigned w = 0;
+/* volatile unsigned long last_fall = 0;
+volatile unsigned long mark_after_break = 0;
+volatile unsigned char led = 0;
+// volatile unsigned send = 0;
+IRAM_ATTR void isr () {
+ if (digitalRead(D6) == LOW) {
+ if (mark_after_break) {
+ // mark_after_break = 0;
+ // send = w-1;
+ // w = 0;
+ mark_after_break = w = 0;
+
+#ifndef DO_SLIP
+ digitalWrite(D4, led++ % 2);
+#endif
+ }
+ last_fall = micros();
+ } else {
+ if (micros() - last_fall > 87)
+ mark_after_break++;
+ }
+} */
+
void setup () {
- pinMode(D0, OUTPUT);
+ pinMode(D6, INPUT_PULLUP);
Serial.begin(250000, SERIAL_8N2);
Serial.swap();
+#ifdef DO_SLIP
Serial1.begin(/* MONITOR_SPEED */ 115200);
+#else
+ pinMode(D4, OUTPUT);
+#endif
+#ifdef DO_WIFI
// WiFi.softAP("dmx2artnet", NULL, 11, 0, 8);
- WiFi.begin("OpenWrt", NULL);
- // WiFi.begin("Hell Patrol", WIFI_PW);
+ // WiFi.begin("OpenWrt", NULL);
+ WiFi.begin("Hell Patrol", WIFI_PW);
u.begin(6454);
+#endif
sprintf(p.artnet.name, "Art-Net");
p.artnet.opcode[0] = 0x00;
p.artnet.opcode[1] = 0x50;
@@ -84,7 +117,10 @@ void setup () {
p.artnet.physical = 0;
p.artnet.sub_uni = 0;
p.artnet.net = 0;
- p.udp.srcport = p.udp.dstport = htons(6454);
+ if (digitalRead(D6) == LOW)
+ p.udp.srcport = p.udp.dstport = htons(6455);
+ else
+ p.udp.srcport = p.udp.dstport = htons(6454);
p.udp.checksum = 0;
p.ip.headlen = HEADLENOR | 5;
p.ip.srvtype = 0;
@@ -96,53 +132,67 @@ void setup () {
p.ip.src[2] = (ESP.getChipId() & 0xff00) >> 8;
p.ip.src[3] = (ESP.getChipId() & 0xff);
memset(p.ip.dst, 255, 4);
+ // attachInterrupt(digitalPinToInterrupt(D6), isr, CHANGE);
}
-char slip_buf[sizeof p * 2 + 1];
unsigned char recording[sizeof p.artnet.data * 2];
+#ifdef DO_SLIP
+char slip_buf[sizeof p * 2 + 1];
unsigned slip_off = 0;
unsigned slip_len = 0;
+#endif
#define SLIP Serial1
void loop () {
+#ifdef DO_SLIP
unsigned avail = SLIP.availableForWrite();
if (slip_off < slip_len && avail) {
if (avail > slip_len-slip_off)
avail = slip_len-slip_off;
slip_off += SLIP.write(slip_buf+slip_off, avail);
}
+#endif
if (Serial.available()) {
- č = millis();
+ č = micros();
if (w < sizeof p.artnet.data * 2)
recording[w++] = Serial.read();
else
Serial.read();
}
- if (č + 1 < millis() && w) {
- unsigned T;
- for (T = 0; T < w; T++) // prvi kanal ne sme biti 0, tako zaznamo začetek paketa
+ if (č + 200 < micros() && w) {
+ // if (send) {
+ unsigned t = 0;
+ if (w == sizeof p.artnet.data) // če smo break zaznali kot bajt, ga odstranimo
+ t = 1;
+ unsigned l = w-t-1; // en je tip
+ /* for (T = 0; T < w; T++) // prvi kanal ne sme biti 0, tako zaznamo začetek paketa
if (recording[T] > 1)
- break;
- memcpy(p.artnet.data, recording + T, sizeof p.artnet.data);
- unsigned l = w-T;
+ break; */
+ /* for (unsigned i = 0; i < sizeof p.artnet.data; i++) // takes too long???
+ if (!(hack_for_midi_flash && recording[t + 1] == 255))
+ p.artnet.data[i] = recording[t + 1]; */
+ memcpy(p.artnet.data, recording + t + 1, sizeof p.artnet.data);
if (l > sizeof p.artnet.data)
l = sizeof p.artnet.data;
/* l++;
while (--l)
if (p.data[l-1])
break; */
- if (!t) {
+ if (!recording[t]) {
p.artnet.length_hi = l / 256;
p.artnet.length_lo = l % 256;
+#ifdef DO_WIFI
IPAddress b(255, 255, 255, 255);
u.beginPacket(b, 6454);
u.write((unsigned char *) &p.artnet, sizeof p.artnet - sizeof p.artnet.data + l);
u.endPacket();
+#endif
+#ifdef DO_SLIP
if (slip_off >= slip_len) {
p.ip.identifier = htons(millis());
p.udp.length = htons(sizeof p.udp + sizeof p.artnet - sizeof p.artnet.data + l);
p.ip.length = htons(sizeof p - sizeof p.artnet.data + l);
p.ip.checksum = 0;
uint32_t sum = 0;
- for (unsigned i = 0; i < sizeof p/2+sizeof p%2; i++)
+ for (unsigned i = 0; i < sizeof p.ip/2+sizeof p.ip%2; i++)
sum += ntohs(((uint16_t *) &p)[i]);
while (sum >> 16)
sum = (sum >> 16) + sum % 65536;
@@ -167,6 +217,7 @@ void loop () {
}
slip_buf[slip_len++] = END;
}
+#endif
}
/*
Serial1.println("dolžina podatkov " + String(w-T) + ", tip: " + String(t));