1 files changed, 260 insertions, 145 deletions

diff --git a/heimdall/missing b/heimdall/missing
index cdea514..9a55648 100755
--- a/heimdall/missing
+++ b/heimdall/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
 
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2012-01-06.18; # UTC
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -29,33 +29,61 @@ if test $# -eq 0; then
   exit 1
 fi
 
-case $1 in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
-  --is-lightweight)
-    # Used by our autoconf macros to check whether the available missing
-    # script is modern enough.
-    exit 0
-    ;;
+# In the cases where this matters, 'missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
 
-  --run)
-    # Back-compat with the calling convention used by older automake.
-    shift
-    ;;
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
+Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  bison     yacc      flex         lex       help2man
+  aclocal      touch file 'aclocal.m4'
+  autoconf     touch file 'configure'
+  autoheader   touch file 'config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all 'Makefile.in' files
+  bison        create 'y.tab.[ch]', if possible, from existing .[ch]
+  flex         create 'lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create 'lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create 'y.tab.[ch]', if possible, from existing .[ch]
 
 Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
 'g' are ignored when checking the name.
@@ -70,141 +98,228 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "$0: Unknown '$1' option"
     echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# Run the given program, remember its exit status.
-"$@"; st=$?
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running '$TOOL --version' or '$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'acinclude.m4' or '${configure_ac}'.  You might want
+         to install the Automake and Perl packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified '${configure_ac}'.  You might want to install the
+         Autoconf and GNU m4 packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
 
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
-    s/^gnu-//; t
-    s/^gnu//; t
-    s/^g//; t'`
-
-  printf '%s\n' "'$1' is $msg."
-
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
-  case $normalized_program in
-    autoconf*)
-      echo "You should only need it if you modified 'configure.ac',"
-      echo "or m4 files included by it."
-      program_details 'autoconf'
-      ;;
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'automa4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
+  autoheader*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'acconfig.h' or '${configure_ac}'.  You might want
+         to install the Autoconf and GNU m4 packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
     ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
-      ;;
-    *)
-      echo "You might have modified some files without having the proper"
-      echo "tools for further handling them.  Check the 'README' file, it"
-      echo "often tells you about the needed prerequisites for installing"
-      echo "this package.  You may also peek at any GNU archive site, in"
-      echo "case some other package contains this missing '$1' program."
-      ;;
-  esac
-}
-
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
-                       -e '2,$s/^/         /' >&2
-
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
+
+  automake*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
+         You might want to install the Automake and Perl packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: '$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get '$1' as part of Autoconf from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: '$1' $msg.  You should only need it if
+         you modified a '.y' file.  You may need the Bison package
+         in order for those modifications to take effect.  You can get
+         Bison from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified a '.l' file.  You may need the Flex package
+         in order for those modifications to take effect.  You can get
+         Flex from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG=\${$#}
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 Help2man package in order for those modifications to take
+	 effect.  You can get Help2man from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: '$1' is $msg.  You should only need it if
+         you modified a '.texi' or '.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy 'make' (AIX,
+         DU, IRIX).  You might want to install the Texinfo package or
+         the GNU make package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: '$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the 'README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing '$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)