diff options
Diffstat (limited to 'Heimdall/OSX/README.txt')
| -rw-r--r-- | Heimdall/OSX/README.txt | 133 |
1 files changed, 0 insertions, 133 deletions
diff --git a/Heimdall/OSX/README.txt b/Heimdall/OSX/README.txt deleted file mode 100644 index c5e82b0..0000000 --- a/Heimdall/OSX/README.txt +++ /dev/null @@ -1,133 +0,0 @@ -Heimdall (c) 2010 Benjamin Dobell, Glass Echidna
-http://www.glassechidna.com.au/products/heimdall/
-
-DISCLAIMER:
-
- This software attempts to flash your Galaxy S device. The very nature of
- flashing is dangerous. As with all flashing software, Heimdall has the
- potential to damage (brick) your phone if not used carefully. If you're
- concerned, don't use this software. Flashing ROMs onto your phone may also
- void your warranty. Benjamin Dobell and Glass Echidna are not responsible
- for the result of your actions.
-
-
-
-These instructions are for OS X operating systems.
-
-Installing Heimdall and Heimdall Frontend Binaries:
-
- 1. Run "Heimdall Suite.pkg" and follow the instructions.
-
- 2. Reboot your system.
-
- 3. Done
-
-
-
-Installing Heimdall from Source:
-
- 1. First make sure you have installed build-tools and pkgconfig.
-
- 2. Open a terminal and navigate to the directory where you extracted
- Heimdall.
-
- 3. Then enter the following commands to compile and install libusb-1.0:
-
- cd libusb-1.0
- ./configure
- make
- sudo make install
- cd ..
-
- If you have problems please consult http://www.libusb.org/
-
- 4. Enter the following commands to compile and install Heimdall:
-
- cd heimdall
- ./configure
- make
- sudo make install
- cd ..
-
- 5. If you haven't installed the driver before, enter the following:
-
- cd OSX
- sudo ./install-kext.sh
-
- 6. Done
-
-
-Installing Heimdall Frontend from Source (Optional):
-
- 1. First make sure you have installed XCode and Qt 4.6 or above,
- available from http://qt.nokia.com/.
-
- 2. Open a terminal and navigate to the directory where you extracted
- Heimdall.
-
- 3. Enter the following commands to compile and install Heimdall Frontend:
-
- cd heimdall-frontend
- qmake heimdall-frontend.pro
-
- 4. This will produce an XCode project called heimdall-frontend.xcodeproj
- in the heimdall-frontend folder. Open this file in XCode.
-
- 5. From the menu bar select Build -> Build. This outputs heimdall-frontend
- to /Applications
-
- 6. Done
-
-
-
-Flashing Firmware with Heimdall Frontend:
-
- 1. Fully charge your device (use the wall charger as it's faster).
-
- 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.
-
- 3. If the ROM is provided as one of more archives (nested or otherwise),
- extract them all to the same location.
-
- NOTE: If you want to use the CSC then extract it last.
-
- 3. Open Heimdall Frontend.
-
- 4. Put your Galaxy S device into download mode.
-
- 5. For each file you wish to flash use "Browse" to select the file.
-
- 6. Press "Start".
-
- 7. Heimdall Frontend will display the progress and inform you when the
- flash is complete.
-
-
-
-Flashing Firmware from Command Line / Terminal:
-
- 1. Fully charge your device (use the wall charger as it's faster).
-
- 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory.
-
- 3. If the ROM is provided as one of more archives (nested or otherwise),
- extract them all to the same location.
-
- NOTE: If you want to use the CSC then extract it last.
-
- 4. Open a terminal and navigate to the directory where you extracted the
- ROM files.
-
- 5. Type the following to list all the functionality Heimdall supports:
-
- heimdall help
-
- 8. Use the instructions to manually enter a command with all the files you
- want to flash.
-
- Here is an example that does a full flash and repartition:
-
- heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin
-
- 9. Done
-
|