summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--_ont/ont-technicolor-afm0002.md185
1 files changed, 153 insertions, 32 deletions
diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md
index 24874bf..1c2a1ed 100644
--- a/_ont/ont-technicolor-afm0002.md
+++ b/_ont/ont-technicolor-afm0002.md
@@ -127,38 +127,159 @@ The following commands are used to flash a new rootfs to image1 and then boot to
{% include alert.html content="This section is based on the `V1_7_8_210412` version of the stick's firmware " alert="Info" icon="svg-info" color="blue" %}
## Adding support to configurable SW and HW versions, Vendor ID and much more
-`/etc/scripts/flash` can be flashed in order to add support for some variables implemented in `omci_app` but removed from `xmlconfig`. The patch is below (change the values to suit your needs)
-```patch
---- squashfs-root/etc/scripts/flash 2021-09-28 10:38:52.000000000 +0200
-+++ squashfs-root.new/etc/scripts/flash 2022-08-04 00:00:29.769605000 +0200
-@@ -62,7 +62,26 @@
- if [ `echo $para | egrep $specific_mib_patten` ]; then
- /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g" | sed -r "s/,+//g"
- else
-- /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g"
-+ case "$para" in
-+ "OMCI_EQID")
-+ echo "$para=MY_EQID"
-+ ;;
-+ "OMCI_VENDOR_ID")
-+ echo "$para=MY_VENDOR"
-+ ;;
-+ "OMCI_SW_VER1")
-+ echo "$para=MY_SW_VER1"
-+ ;;
-+ "OMCI_SW_VER2")
-+ echo "$para=MY_SW_VER2"
-+ ;;
-+ "OMCI_ONT_VER")
-+ echo "$para=MY_HW_VER"
-+ ;;
-+ *)
-+ /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g"
-+ ;;
-+ esac
- fi
- if [ "$?" = "0" ]; then
- exit 0
+`/etc/scripts/flash` can be modified in order to add support for some variables implemented in `omci_app` but removed from `xmlconfig`. The modified file is below.
+
+`flash set` will still print an error but the change wil be persisted. You can check that by running the relative `flash get` command
+
+```sh
+#!/bin/ash
+#
+# usage: flash.sh [cmd] ...
+#
+
+DEFAULT_FILE="/etc/config_default.xml"
+DEFAULT_HS_FILE="/etc/config_default_hs.xml"
+LASTGOOD_FILE="/var/config/lastgood.xml"
+LASTGOOD_HS_FILE="/var/config/lastgood_hs.xml"
+
+# for array type in hw_setting
+specific_mib_patten="(^HW(_|_WLAN0_|_WLAN1_)TX_POWER*)|(^HW_FON_KEYWORD$)"
+
+rename_mib_patten="^HW_(NIC[0-1]|WLAN[0-1]_WLAN)_ADDR"
+rename_mib_name="ELAN_MAC_ADDR"
+
+hw_mib="^HW_|^SUPER_NAME$|^SUPER_PASSWORD$|^BOOT_MODE$|^ELAN_MAC_ADDR#|^WLAN_MAC_ADD$|^WAN_PHY_PORT$|^WIFI_SUPPORT$|^BYTE$|^WORD$|^DWORD$|^INT1$|^INT2$"
+var=""
+
+
+case "$1" in
+ "all")
+# echo "------ [$1] Display all settings ------"
+ if [ $# -eq 1 ] || [ "$2" = "hs" ]; then
+ /bin/xmlconfig -os -hs
+ fi
+ if [ $# -eq 1 ] || [ "$2" = "cs" ]; then
+ /bin/xmlconfig -os
+ fi
+ exit 0
+ ;;
+ "default")
+# echo "------ [$1] Restore to default configurationg ------"
+ if [ "$2" = "cs" ]; then
+ /bin/xmlconfig -def_mib
+ /bin/xmlconfig -if $DEFAULT_FILE -nodef && /bin/xmlconfig -of $LASTGOOD_FILE
+ echo "Reset CS to default configuration success."
+ elif [ "$2" = "hs" ]; then
+ /bin/xmlconfig -def_mib -hs
+ /bin/xmlconfig -if $DEFAULT_HS_FILE -nodef && /bin/xmlconfig -of $LASTGOOD_HS_FILE
+ echo "Reset HS to default configuration success."
+ elif [ "$2" = "voip" ]; then
+ /bin/xmlconfig -def_voip_mib
+ /bin/xmlconfig -of $LASTGOOD_FILE
+ echo "Reset VoIP to default configuration success."
+ else
+ echo "Restore to default configurationg fail."
+ /bin/sh $0 -h
+ exit 1
+ fi
+ echo "Please reboot system."
+ exit 0
+ ;;
+ "get" | "gethw")
+# echo "------ [$1] Get a specific mib parameter from flash memory. ------"
+ if [ "$2" != "" ]; then
+ para=$2
+ if [ `echo $para | egrep $rename_mib_patten` ]; then
+ para=$rename_mib_name
+ fi
+ #echo "/bin/xmlconfig -g $para"
+ if [ `echo $para | egrep $specific_mib_patten` ]; then
+ /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g" | sed -r "s/,+//g"
+ else
+ local_nv_getenv=`nv getenv $para`
+ if [ -z "${local_nv_getenv}" ]; then
+ /bin/xmlconfig -g $para | sed -r "s/$rename_mib_name+/$2/g"
+ else
+ echo "${local_nv_getenv}" | sed -r "s/$rename_mib_name+/$2/g"
+ fi
+ fi
+ if [ "$?" = "0" ]; then
+ exit 0
+ fi
+ else
+ /bin/sh $0 -h
+ exit 1
+ fi
+ ;;
+ "set" | "sethw")
+ # echo "------ [$1] Set a specific mib parameter into flash memory. ------"
+ if [ "$2" != "" ] && [ "$3" != "" ]; then
+ para=$2
+ if [ `echo $para | egrep $rename_mib_patten` ]; then
+ $para=$rename_mib_name
+ fi
+
+ if [ $# -eq 3 ]; then
+ var=$3
+ else
+ while [ $# -ge 3 ]
+ do
+ # for multiple decimal values: dec2hex and concatenate all setting value
+ if [ "$3" = "08" ] || [ "$3" = "09" ]; then
+ # 08 & 09 are not invalid octal number
+ var=$var$3
+ else
+ var=$var`printf "%02x" $3`
+ fi
+
+ shift
+ if [ $# -ge 3 ]; then var=$var","; fi
+ done
+ fi
+ #echo "/bin/xmlconfig -s $para $var"
+
+ /bin/xmlconfig -s $para $var | egrep "[ERR]"
+ if [ $? == 0 ]; then
+ nv setenv $para $var
+ else
+ # Clear the ovveride from nv if it is there since we wrote it to xmlconfig
+ nv setenv $para
+ fi
+ if [ "`echo $2 | egrep $hw_mib`" = "" ]; then
+ /bin/xmlconfig -of $LASTGOOD_FILE
+ fi
+ /bin/xmlconfig -of -hs $LASTGOOD_HS_FILE && exit 0
+ else
+ /bin/sh $0 -h
+ exit 1
+ fi
+ ;;
+ "-h")
+ echo 'Usage: flash.sh [cmd]'
+ echo 'cmd:'
+ echo ' all <cs/hs> : Show all settings.'
+ echo ' default <cs/hs> : Restore to default configuration.'
+ echo ' get MIB-NAME : get a specific mib parameter from flash memory.'
+ echo ' set MIB-NAME MIB-VALUE : set a specific mib parameter into flash memory.'
+ echo
+ echo ' Note: When set the MIB_ARRAY or MIB_VALUE overflowed,'
+ echo ' xmlconfig will truncate the redundant part.'
+ echo ' Take signed integer for example:'
+ echo ' 1. Set value=-6442450944(0xfffffffe80000000),'
+ echo ' and get value=-2147483648(0x80000000)'
+ echo ' 2. Set value=-2147483649(0xffffffff7fffffff),'
+ echo ' and get value=2147483647(0x7fffffff)'
+ echo ' 3. Set value=2147483648(0x80000000),'
+ echo ' and get value=-2147483648(0x80000000)'
+ echo ' 4. Set value=4294967296(0x100000000), and get value=0(0x0)'
+ echo
+ ;;
+ *)
+ /bin/sh $0 -h
+ exit 1
+ ;;
+esac
+
```
## Increasing the length of the software version from 13 to 14 characters
`omci_app` has an hard-coded limit of 13 characters for the software version, which is too low. We can binary patch it to increase it to 14 (or more, if you dare/need)