diff options
Diffstat (limited to '_ont/ont-technicolor-afm0002.md')
| -rw-r--r-- | _ont/ont-technicolor-afm0002.md | 59 |
1 files changed, 36 insertions, 23 deletions
diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md index 21a9bd5..d102821 100644 --- a/_ont/ont-technicolor-afm0002.md +++ b/_ont/ont-technicolor-afm0002.md @@ -8,30 +8,40 @@ alias: Hisense LTE3415-SCA+ # Hardware Specifications -| | | -| ----------- | ----------------------------------------------- | -| Vendor | Technicolor | -| Model | AFM0002TIM/FWB/WND | -| Chipset | Realtek RTL9601B | -| Flash | 32 MB | -| RAM | | -| System | Linux (Luna SDK) | -| HSGMII | No | -| Optics | | -| IP address | 192.168.2.1 / 169.0.0.1 | -| Web Gui | Can be enabled, user `admin`, password `system` | -| SSH | ✅ user `admin`, password `system` | -| Form Factor | miniONT SFP | -| Multicast | ✅ | +| | | +| ---------------- | ----------------------------------------------- | +| Vendor/Brand | Technicolor | +| Model | AFM0002TIM/FWB/WND | +| ODM | Hisense | +| ODM Product Code | LTE3415-SCA+ | +| Chipset | Realtek RTL9601B | +| Flash | 32 MB | +| RAM | | +| System | Linux (Luna SDK 1.9) | +| HSGMII | No | +| Optics | | +| IP address | 192.168.2.1 / 169.0.0.1 | +| Web Gui | Can be enabled, user `admin`, password `system` | +| SSH | ✅ user `admin`, password `system` | +| Telnet | | +| Serial | ✅ | +| Serial baud | 115200 | +| Serial encoding | 8-N-1 | +| Form Factor | miniONT SFP | +| Multicast | ✅ | {% include image.html file="afm0002tim.jpg" alt="AFM0002TIM" caption="AFM0002TIM" %} {% include image.html file="afm0002fwb.jpg" alt="AFM0002FWB" caption="AFM0002FWB" %} ## Serial -Configuration: 115200 8-N-1 +The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the stick's shield: -# Hardware Revisions +{% include image.html file="ont-leox-lxt-010s-h_ttl.jpg" alt="Technicolor AFM0002 TTL Pinout" caption="Technicolor AFM0002 TTL Pinout" %} + +{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} + +## Hardware Revisions - AFM0002TIM (IP address: 192.168.2.1) - AFM0002FWB (IP address: 169.0.0.1) @@ -41,7 +51,7 @@ Configuration: 115200 8-N-1 {% include alert.html content="The AFM0002FWB can be transformed into AFM0002TIM. Usually AFM0002FWBs have older software." alert="Warning" icon="svg-warning" color="red" %} -# List of software versions +## List of software versions - V1.7.6-170626 (FWB & WND) - V1_7_8_180122 - V1_7_8_180725 @@ -49,7 +59,7 @@ Configuration: 115200 8-N-1 - V1_7_8_210412 - V1_7_8_210928 -# List of partitions +## List of partitions | dev | size | erasesize | name | | ----- | -------- | --------- | --------------- | @@ -92,10 +102,6 @@ This stick supports dual boot. ```sh # /bin/iptables -D INPUT -p tcp --dport 80 -j DROP ``` -# Low Level Modding - -{% include alert.html content="This section is based on the `V1_7_8_210412` version of the stick's firmware " alert="Info" icon="svg-info" color="blue" %} - ## Transfering files from/to the stick Works with binary files too, just run md5sum on source and destination to make sure you are not corrupting anything... @@ -131,6 +137,11 @@ The following commands are used to flash a new rootfs to image1 and then boot to # nv setenv sw_commit 1 # reboot ``` + +# Low Level Modding + +{% include alert.html content="This section is based on the `V1_7_8_210412` version of the stick's firmware " alert="Info" icon="svg-info" color="blue" %} + ## Adding support to configurable SW and HW versions, Vendor ID and much more `/etc/scripts/flash` can be flashed in order to add support for some variables implemented in `omci_app` but removed from `xmlconfig`. The patch is below (change the values to suit your needs) ```patch @@ -189,7 +200,9 @@ For reference, the patch changes the follwing section of the omci_app: The original file md5sum is: `4aea2f72bacc11256b7e2c1583d2ad4f` The patched file md5sum is: `da20327c4c002e4c27f82f6ee63dbc1a` + ## Enabling PLOAM logging + ```sh /etc/scripts/flash set OMCI_DBGLVL 1 /etc/scripts/flash set OMCI_DBGLOGFILE 1 |