diff options
Diffstat (limited to '_tools/molex-ont.md')
| -rw-r--r-- | _tools/molex-ont.md | 17 |
1 files changed, 8 insertions, 9 deletions
diff --git a/_tools/molex-ont.md b/_tools/molex-ont.md index 151de66..4a0db95 100644 --- a/_tools/molex-ont.md +++ b/_tools/molex-ont.md @@ -5,19 +5,18 @@ nav_order: 3 layout: default --- -In some sticks, such as those based on Lantiq chipsets, the serial is exposed in the upper pins of the ONT, in order to read them there are two possibilities: -- the use of an SFP molex ([farnell](https://it.farnell.com/en-IT/molex/74441-0001/connector-sfp-rcpt-20pos-smt/dp/2112385)) to which you solder four wires and remove the other pins, this makes the adapter compatible for a single serial combination -- the use of a board to which the SFP molex is soldered, exposing the main SFP pins +In some sticks, such as those based on Lantiq chipsets, the serial interface is exposed in the upper pins of the ONT, in order to read them there are two possibilities: +- the use of an SFP molex ([farnell](https://it.farnell.com/en-IT/molex/74441-0001/connector-sfp-rcpt-20pos-smt/dp/2112385)) to which four wires are to be soldered and the other pins removed. This makes the adapter compatible with a single serial combination. +- the use of a board to which the SFP molex is soldered, exposing the main SFP pins. -{% include image.html file="ma5671a-root-1.jpg" alt="Example of how the sfp-ttl adapter" caption="Example of how the sfp-ttl adapter" %} +{% include image.html file="ma5671a-root-1.jpg" alt="Example of how the SFP-TTL adapter is to be connected" caption="Example of how the SFP-TTL adapter is to be connected" %} -{% include image.html file="new-root-procedure/board-molex-arduino.jpg" alt="Example of how the sfp-ttl adapter with a custom board" caption="Example of how the sfp-ttl adapter with a custom board" %} +{% include image.html file="new-root-procedure/board-molex-arduino.jpg" alt="Example of how the SFP-TTL adapter is to be used with a custom board" caption="Example of how the SFP-TTL adapter is to be used with a custom board" %} -if you want to make your own board, here are some ideas: +If you want to make your own board, here are some ideas: - -{% include image.html file="board-dupont/top.svg" alt="Example of how the sfp-ttl custom board" caption="Example of how the sfp-ttl custom board" %} -{% include image.html file="board-dupont/bottom.svg" alt="Example of how the sfp-ttl custom board" caption="Example of how the sfp-ttl custom board" %} +{% include image.html file="board-dupont/top.svg" alt="Example of an SFP-TTL custom board" caption="Example of an SFP-TTL custom board" %} +{% include image.html file="board-dupont/bottom.svg" alt="Example of an SFP-TTL custom board" caption="Example of an SFP-TTL custom board" %} the components to be soldered are instead: - 1x MOLEX SFP (like Molex-744410001 [lcsc](https://www.lcsc.com/product-detail/Card-Edge-Connectors_MOLEX-744410001_C277615.html), [farnell](https://it.farnell.com/en-IT/molex/74441-0001/connector-sfp-rcpt-20pos-smt/dp/2112385)) |