blob: 2d5126857a917504d86da4d310c9a14145392982 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
---
title: Vantiva AFM0003 (formerly Technicolor AFM0003)
has_children: false
layout: default
parent: Technicolor (formerly Technicolor)
alias: HiSense LTE3415-SH+
---
# Hardware Specifications
| | |
| ---------------- | ----------------------------------------------- |
| Vendor/Brand | Vantiva (formerly Technicolor) |
| Model | AFM0003TIM |
| ODM | HiSense |
| ODM Product Code | LTE3415-SH+ |
| Chipset | Realtek RTL9601CI |
| Flash | 128MB |
| RAM | 32MB |
| System | Linux 2.6 (Luna SDK 1.9) |
| HSGMII | Yes, but not working with stock firmware |
| Optics | SC/APC |
| IP address | 192.168.2.1 |
| Web Gui | Can be enabled, user `admin`, password `system` |
| SSH | No |
| Telnet | ✅ |
| Form Factor | miniONT SFP |
| Serial | ✅ |
| Serial baud | 115200 |
| Serial encoding | 8-N-1 |
| Multicast | ✅ |
{% include image.html file="afm0003tim.jpg" alt="AFM0003TIM" caption="AFM0003TIM" %}
## Serial
The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the stick's shield:
{% include image.html file="ont-leox-lxt-010s-h_ttl.jpg" alt="Vantiva (formerly Technicolor) AFM0003 TTL Pinout" caption="Vantiva (formerly Technicolor) AFM0003 TTL Pinout" %}
{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
# Hardware Revisions
- AFM0003TIM (IP address: 192.168.2.1)
# List of software versions
- V1_7_8_220201
# List of partitions
| dev | size | erasesize | name |
| ----- | -------- | --------- | --------------- |
| mtd0 | 000c0000 | 00020000 | "boot" |
| mtd1 | 00020000 | 00020000 | "env" |
| mtd2 | 00020000 | 00020000 | "env2" |
| mtd3 | 01800000 | 00020000 | "config" |
| mtd4 | 00800000 | 00020000 | "k0" |
| mtd5 | 02a40000 | 00020000 | "r0" |
| mtd6 | 00800000 | 00020000 | "k1" |
| mtd7 | 02a40000 | 00020000 | "r1" |
| mtd8 | 00001000 | 00020000 | "Partition_008" |
| mtd9 | 00001000 | 00020000 | "Partition_009" |
| mtd10 | 00001000 | 00020000 | "Partition_010" |
| mtd11 | 00001000 | 00020000 | "Partition_011" |
| mtd12 | 00800000 | 00020000 | "linux" |
| mtd13 | 02a40000 | 00020000 | "rootfs" |
This stick supports dual boot.
`k0` and `r0` respectively contain kernel and firmware of the first image, while `k1` and `r1` contain kernel and firmware of the second one.
{% include_relative ont-luna-sdk-useful-commands.md
flash='/etc/scripts/flash'
ploam='ascii'
speedLan='123456'
customSpeedLanAlert='The default firmware does not allow modification of the `LAN_SDS_MODE` parameter. Using modded firmware is needed. Before editing the sync speed make sure your hardware supports it.'
lastgoodHs=true
flashSwVersion=true
%}
## Enabling the Web UI
```sh
# /bin/iptables -D INPUT -p tcp --dport 80 -j DROP
```
## Transfering files from/to the stick
Works with binary files too, just run md5sum on source and destination to make sure you are not corrupting anything...
From the stick to the PC:
```sh
# tftp <IP>
tftp> put <filename> <directory>
tftp> q
```
From the PC to the stick:
```sh
# tftp <IP>
tftp> get <filename>
tftp> q
```
## Extracting and repacking the rootfs
{% include alert.html content="Make sure you run both commands as root, otherwise you might get a damaged rootfs image" alert="Warning" icon="svg-warning" color="red" %}
```sh
# unsquashfs mtd5.bin
# mksquashfs squashfs-root rootfs -b 131072 -comp lzma -no-recovery
```
## Flashing a new rootfs
{% include alert.html content="Only the inactive image can be flashed, change sw_versionX and sw_commit X based on the bank you have flashed" alert="Info" icon="svg-info" color="blue" %}
Flash mtd4/5 if you are on image1, mtd6/7 if you are on image0.
The following commands are used to flash a new rootfs to image1 and then boot to it
```sh
# flash_eraseall /dev/mtd7
# cat /tmp/rootfs.new > /dev/mtd7
```
If you get this error on `cat` command
```sh
# cat /tmp/rootfs.new > /dev/mtd7
cat: write error: Invalid Argument
```
Use this proceudre instead to write firmware back to mtd:
```sh
# flash_eraseall /dev/mtd7
# cat /tmp/rootfs.new > /dev/mtdblock7
```
Then make new firmware bootable
```sh
# nv setenv sw_version1 NEW_SOFTWARE_VERSION
# nv setenv sw_commit 1
# reboot
```
# Miscellaneous Links
- [omcilog2pcap](https://github.com/hack-gpon/omcilog2pcap)
|
