1 files changed, 2 insertions, 2 deletions

diff --git a/02.-Direction-Finding-Quickstart-Guide.md b/02.-Direction-Finding-Quickstart-Guide.md
index 84766cd..840592d 100644
--- a/02.-Direction-Finding-Quickstart-Guide.md
+++ b/02.-Direction-Finding-Quickstart-Guide.md
@@ -28,8 +28,6 @@ You may wish to use our antenna spacing template which will help with accurate a
 
 Files for 3D printing and paper printing can be found in this repo at https://github.com/krakenrf/krakensdr_docs/tree/main/antenna_array
 
-We can also recommend an alternative 3D printed spacer made by a customer on Thingiverse: https://www.thingiverse.com/thing:5787042
-
 For both templates print the center pentagon and five arms separately, then glue them together. PAPER PRINTING NOTE: Please ensure that you DO NOT have any printer scaling turned on. The templates fit on a standard A4 paper.
 
 **Each hole is spaced at 50mm radius intervals.** So you have radius spacings of 100mm, 150mm, 200mm, and 250mm. These spacings cover the following frequency range:
@@ -39,6 +37,8 @@ For both templates print the center pentagon and five arms separately, then glue
 * 200mm : 255 - 637 MHz
 * 250mm : 204 - 510 MHz
 
+Alternatively, we can also recommend an alternative 3D printed antenna spacer made by a customer on Thingiverse: https://www.thingiverse.com/thing:5787042
+
 ## Mount the antennas
 The image below explains how the antennas should be mounted. Make sure the array is as straight as possible. ANT-0 must connect to CH-0 on the KrakenSDR. ANT-1 must connect to CH-1 and so on.