diff options
| author | Wolfgang (Wolle) Ewald <wolfgang.ewald@wolles-elektronikkiste.de> | 2021-06-23 20:53:02 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-06-23 20:53:02 +0200 |
| commit | e93c07ba677f694f9c49519bb97ddbe4e7e926ad (patch) | |
| tree | 6d1d06751f99d86000003a2fca7f8139057a04b4 | |
| parent | Create Using_two_ADS1115.ino (diff) | |
| download | ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar.gz ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar.bz2 ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar.lz ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar.xz ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.tar.zst ADS1115_WE-e93c07ba677f694f9c49519bb97ddbe4e7e926ad.zip | |
| -rw-r--r-- | examples/Using_two_ADS1115/Using_two_ADS1115.ino | 72 |
1 files changed, 71 insertions, 1 deletions
diff --git a/examples/Using_two_ADS1115/Using_two_ADS1115.ino b/examples/Using_two_ADS1115/Using_two_ADS1115.ino index 8b13789..a8c8666 100644 --- a/examples/Using_two_ADS1115/Using_two_ADS1115.ino +++ b/examples/Using_two_ADS1115/Using_two_ADS1115.ino @@ -1 +1,71 @@ - +/***************************************************************************
+* Example sketch for the ADS1115_WE library
+*
+* This sketch shows how to use two ADS1115 modules. In order to set the address,
+* connect the address pin to:
+*
+* GND -> 0x48 (or leave unconnected)
+* VCC -> 0x49
+* SDA -> 0x4A
+* SCL -> 0x4B
+*
+* When you have understood how it works you can easily add two additional ADS1115.
+* Of course there is potential to shorten the code, e.g. by setting up the ADCs
+* as array.
+*
+* If you need up to eight ADS1115 modules you can use an ESP32 with its two I2C
+* interfaces:
+* https://wolles-elektronikkiste.de/en/how-to-use-the-i2c-interfaces-of-the-esp32
+*
+* If you need up to 32 ADS1115 modules you can use a multiplexer like the TSCA9548A:
+* https://wolles-elektronikkiste.de/en/tca9548a-i2c-multiplexer
+*
+* Or you combine both and control up to 64 ADS1115 modules.
+*
+* Further information about the ADS1115 can be found on:
+* https://wolles-elektronikkiste.de/ads1115 (German)
+* https://wolles-elektronikkiste.de/en/ads1115-a-d-converter-with-amplifier (English)
+*
+***************************************************************************/
+
+#include<ADS1115_WE.h>
+#include<Wire.h>
+#define I2C_ADDRESS_1 0x48
+#define I2C_ADDRESS_2 0x49
+
+ADS1115_WE adc_1 = ADS1115_WE(I2C_ADDRESS_1);
+ADS1115_WE adc_2 = ADS1115_WE(I2C_ADDRESS_2);
+
+void setup() {
+ Wire.begin();
+ Serial.begin(9600);
+
+ if(!adc_1.init()){
+ Serial.print("ADS1115 No 1 not connected!");
+ }
+ adc_1.setVoltageRange_mV(ADS1115_RANGE_6144);
+ adc_1.setMeasureMode(ADS1115_CONTINUOUS);
+ adc_1.setCompareChannels(ADS1115_COMP_0_GND);
+
+ if(!adc_2.init()){
+ Serial.print("ADS1115 No 2 not connected!");
+ }
+ adc_2.setVoltageRange_mV(ADS1115_RANGE_6144);
+ adc_2.setMeasureMode(ADS1115_CONTINUOUS);
+ adc_2.setCompareChannels(ADS1115_COMP_0_GND);
+}
+
+void loop() {
+ float voltage = 0.0;
+
+ voltage = adc_1.getResult_V();
+ Serial.println("Voltage [V], ADS1115 No 1: ");
+ Serial.println(voltage);
+
+ voltage = adc_2.getResult_V();
+ Serial.println("Voltage [V], ADS1115 No 2: ");
+ Serial.println(voltage);
+
+ Serial.println("****************************");
+ delay(1000);
+}
|